FW: Boot Problem after Playing with Powervault
Rick Stevens
rstevens at vitalstream.com
Tue Sep 26 16:59:10 UTC 2006
On Mon, 2006-09-25 at 12:36 -0700, Bret Stern wrote:
> > On Fri, 2006-09-22 at 22:42 -0700, Bret Stern wrote:
> > >
> > > -----Original Message-----
> > > From: redhat-install-list-bounces at redhat.com
> > > [mailto:redhat-install-list-bounces at redhat.com] On Behalf Of Rick
> > > Stevens
> > > Sent: Friday, September 22, 2006 12:31 PM
> > > To: Getting started with Red Hat Linux
> > > Subject: Re: Boot Problem after Playing with Powervault
> > >
> > > On Fri, 2006-09-22 at 12:19 -0700, Rick Stevens wrote:
> > > > On Fri, 2006-09-22 at 10:47 -0700, Bret Stern wrote:
> > > > > So..
> > > > >
> > > > > Last night I added a recently purchased Dell Powervault
> > 210s to my
> > > > > Dell 2450 running Fedora 5.
> > > > >
> > > > > As I browsed the uninitialized drives on the PowerVault, I
> > > > > accidentally/on purpose initialized a disk with a linux
> > boot partition.
> > > > > It's just my tinkering habit.
> > > > >
> > > > > Now my system boots to grub> (that's it). Certainly I hosed my
> > > > > Grub boot.
> > > > >
> > > > > Where i'm at..
> > > > >
> > > > > I found that there were two bootable partitions on the machine.
> > > > > One on sda1, and one on sdb1. I toggled the boot flag on sdb1
> > > > > (off) because I only run Linux and sda1 is the logical boot.
> > > > > (Is the above correct thinking). I can always restore the flag.
> > > > >
> > > > >
> > > > > I have booted my machine using the Fedora cd and typee
> > "linux rescue".
> > > > >
> > > > > This found my install and I have chosen to "chroot
> > /mnt/sysimage".
> > > > >
> > > > > I can see all my data.
> > > > >
> > > > > When I tried "grub-install /dev/sda", I get the following.
> > > > > "/boot/grub/stage1 not read correctly"
> > > > >
> > > > >
> > > > > What's my next step (maybe I should get into landscaping) ?
> > > >
> > > > Well, gee. My first guess is that you're using a separate /boot
> > > > partition and it's not mounted, so grub-install can't
> > even find the
> > > > stage 1 boot code. After the "chmod /mnt/sysimage", try doing a
> > >
> > > Grr! "chroot /mnt/sysimage". Fingers not working well today!
> > >
> > > >
> > > > # mount -a
> > > >
> > > > That will force all of the other mounts that are normally done in
> > > > your operating environment, including mounting /boot if it _is_ a
> > > > separate partition.
> > > >
> > > > Once that's done, verify that your /boot/grub/stage1 file is 512
> > > > bytes in length. If it is, then try your "grub-install /dev/sda"
> > > > again and see if it goes OK. If it does, then enter "exit" twice
> > > > (first to get out of the chroot environment, second to exit the
> > > > rescue boot), pop out the CD and see if she'll boot up.
> > > >
> > > > As for landscaping, I hate raking leaves and mowing lawns (did
> > > > enough of that when I was a teen 40 years ago). I have a
> > gardener.
> > > > :-)
> > > >
> > >
> > >
> > > ..sorry about the incorrect bottom posting
> > >
> > >
> > > Tried the mount -a. Got these two messages
> > >
> > > mount: special device LABEL/=boot does not exist
> >
> > I'm guessing that's really "...LABEL=/boot..." and is a bit
> > disturbing.
> > You do use a separate boot partition, and it looks like the filesystem
> > label for it has been stomped on. If you know what the physical disk
> > name for it was, then do a
> >
> > e2label /dev/devname /boot
> >
> > For example, I know that my boot partition is /dev/sda3, so:
> >
> > e2label /dev/sda3 /boot
> >
> > If you don't know, try "fdisk -l /dev/device-name" and look for the
> > entry with a "*" in the second field. In my case:
> >
> > [root at ss-1a root]# fdisk -l /dev/sda
> >
> > Disk /dev/sda: 36.3 GB, 36364615680 bytes
> > 255 heads, 63 sectors/track, 4421 cylinders Units = cylinders of 16065
> > * 512 = 8225280 bytes
> >
> > Device Boot Start End Blocks Id System
> > /dev/sda1 1 8 64228+ de Dell Utility
> > /dev/sda2 9 335 2626627+ 83 Linux
> > /dev/sda3 * 336 360 200812+ 83 Linux
> > /dev/sda4 361 4421 32619982+ f Win95 Ext'd (LBA)
> > /dev/sda5 361 1634 10233373+ 83 Linux
> > /dev/sda6 1635 2908 10233373+ 83 Linux
> > /dev/sda7 2909 3169 2096451 83 Linux
> > /dev/sda8 3170 3300 1052226 83 Linux
> > /dev/sda9 3301 3554 2040223+ 82 Linux swap
> >
>
>
>
>
> > Note the "*" in the second field for /dev/sda3. That's my boot
> > partition. So find yours and make sure it's labeled.
> > Then do the "mount -a" again and make sure /boot gets mounted.
> >
> > Now that you have all of your filesystems mounted (except /dev/shm
> > which is no biggie), you'll want to do your infamous "grub-install
> > /dev/sda"
> > again. Since /boot is now mounted, it should work a treat.
> >
> > > mount: mount point /dev/shm does not exist.
> > >
> > > I believe /dev/shm the drive from the Powervault that I
> > initialized in
> > > the LVM Manager.
> >
> > No, that's the shared memory segment for System V IPC stuff, and I
> > wouldn't worry about it in this case.
> >
> > ----------------------------------------------------------------------
> > - Rick Stevens, Senior Systems Engineer rstevens at vitalstream.com -
> > - VitalStream, Inc. http://www.vitalstream.com -
> > - -
> > - Where there's a will, I want to be in it. -
> > --------------------------------------------------------------
> > --------
>
> results of
> e2label /dev/sda1 /boot
> e2label: Bad magic number in super-block while trying to open /dev/sda1
> Couldn't find valid file system superblock
>
> Holy %@%$@#! batman, the super-block has a bad magic number.
>
>
> Handwritten fstab, mtab, fdisk -l stuff below.
>
> my fstab
> /dev/VolGroup00/VolLog00 / ext3 defaults 1 1
> LABEL=/boot /boot ext3 defaults 1 2
> devpts /dev/pts devpts gid=5, mode=620 0 0
> tmpfs /dev/shm tmpfs defaults 0 0
> proc /proc proc defaults 0 0
> sysfs /sys sysfs defaults 0 0
> /dev/VolGroup00/LogVol01 swap swap defaults 0 0
>
> my mtab
> /dev/VolGroup00/VolLog00 / ext3 rw,defaults 0 0
> proc /proc proc rw,defaults 0 0
> sysfs /sys sysfs rw,defaults 0 0
> /dev/sysfs /sys sysfs rw,defaults 0 0
> devpts /dev/pts devpts rw,gid=5,mode=620 0 0
>
> my fdisk -l
> /dev/sda
> Device Boot Start End Blocks ID System
> /dev/sda1 * 1 13 104391 83
> Linux
> /dev/sda1 14 2215 17687565 8e
> Linux LVM
>
> /dev/sdb
> Device Boot Start End Blocks ID System
> /dev/sdb1 * 1 2215 17791956 8e
> Linux LVM
>
>
> Is there any hope?
Hoo, boy, you stomped on it bad! You can try "fsck -b 8192 /dev/sda1"
and see if that'll rescue it. If not, you may be in trouble.
----------------------------------------------------------------------
- Rick Stevens, Senior Systems Engineer rstevens at vitalstream.com -
- VitalStream, Inc. http://www.vitalstream.com -
- -
- The moving cursor writes, and having written, blinks on. -
----------------------------------------------------------------------
More information about the Redhat-install-list
mailing list