help on nautilus-cd-burner - solved with anther problem
Margaret Doll
Margaret_Doll at brown.edu
Thu Sep 2 18:39:30 UTC 2004
I just realized that I put an IRIX iso in the cd when I tested whether
I could read the cd. That is probably the cause of the error message.
I do need to fix the system so that I can use the qualstar tape drive
and
the writeable cd at the same time.
Thanks, Jay, for all your help.
On Thursday, September 2, 2004, at 02:32 PM, Margaret Doll wrote:
> Jay,
>
> I turned off the qualstar library and rebooted the computer.
>
> "cdrecord -scanbus" now sees the writeable cd. I am running xcdroast
> now.
>
> The next problem I created. I have another system identical to
> the one with a writeable cd in terms of the RedHat software and having
> a qualstar library attached to it. The second system has a cdrom that
> is not writeable.
>
> "ls -al /dev/cdrom " showed a link to /dev/hdc on the second
> system.
>
> I tried to change the link on the first system to match the second.
> by removing /dev/cdrom and making a soft link to /dev/hdc. That was a
> mistake. The soft link does not remain on a reboot and when a readable
> cd is mounted on the system I get:
>
> mount: wrong fs type, bad option, bad superblock on /dev/cdrom,
> or too many mounted file systems
> (could this be the IDE device where you in fact use
> ide-scsi so that sr0 or sda or so is needed?)
>
> I experimented too much.
>
> Is there a way to get /dev/cdrom correctly linked? Hopefully the
> correct
> link will allow me to create cds while the Qualstar library is
> attached.
>
> On Thursday, September 2, 2004, at 02:01 PM, Jay Berryman wrote:
>
>> It looks like xcdroast is trying to use your qualstar library instead
>> of
>> your cd-writer, even though you are defining which scsi bus it is on.
>> Try
>> removing the qualstar library and see if that helps.
>>
>> Jay Berryman
>> Systems Engineer, RHCT
>>
>>
>> This message and any attachments are intended only for the use of the
>> addressee and may contain information that is privileged and
>> confidential.
>> If the reader of the message is not the intended recipient, or the
>> authorized agent of the intended recipient, you are hereby notified
>> that any
>> dissemination of this communication is strictly prohibited. If you
>> have
>> received this communication in error, please notify SITEL immediately
>> by
>> telephone at 402.963.6001 and delete the message and any attachments
>> from
>> your system. Thank you for your cooperation
>>
>>
>> -----Original Message-----
>> From: redhat-list-bounces at redhat.com
>> [mailto:redhat-list-bounces at redhat.com]
>> On Behalf Of Margaret Doll
>> Sent: Thursday, September 02, 2004 12:36 PM
>> To: General Red Hat Linux discussion list
>> Subject: Re: help on nautilus-cd-burner
>>
>> /dev/scd0
>> On Thursday, September 2, 2004, at 12:47 PM, Jay Berryman wrote:
>>
>>> If you type in ls -la on /dev/cdrom what does it say?
>>>
>>> Jay Berryman
>>> Systems Engineer, RHCT
>>>
>>>
>>> This message and any attachments are intended only for the use of the
>>> addressee and may contain information that is privileged and
>>> confidential.
>>> If the reader of the message is not the intended recipient, or the
>>> authorized agent of the intended recipient, you are hereby notified
>>> that any
>>> dissemination of this communication is strictly prohibited. If you
>>> have
>>> received this communication in error, please notify SITEL immediately
>>> by
>>> telephone at 402.963.6001 and delete the message and any attachments
>>> from
>>> your system. Thank you for your cooperation
>>>
>>>
>>> -----Original Message-----
>>> From: redhat-list-bounces at redhat.com
>>> [mailto:redhat-list-bounces at redhat.com]
>>> On Behalf Of Margaret Doll
>>> Sent: Thursday, September 02, 2004 10:52 AM
>>> To: General Red Hat Linux discussion list
>>> Subject: Re: help on nautilus-cd-burner
>>>
>>> Jay,
>>>
>>> I get back
>>>
>>> cdrecord -v -eject dev=1,0,0 speed=8 FC2-i386-disc1.iso
>>> Cdredord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J rg
>>> Schilling
>>> TOC Type: 1 = CD-ROM
>>> scsidev: '1,0,0'
>>> scsibus: 1 target: 0 lun: 0
>>> cdrecord: Device or resource busy. Cannot open '/dev/sg0'. Cannot
>>> open SCSI driver.
>>> ...
>>>
>>>
>>> On Thursday, September 2, 2004, at 11:39 AM, Jay Berryman wrote:
>>>
>>>> See if you can run the following command then:
>>>>
>>>> cdrecord -v -eject dev=1,0,0 speed=8 <path of image file>
>>>>
>>>> If you need to make an image file to burn you can run this command:
>>>>
>>>> mkisofs -l -J -R -o <filename> <file or directory to be made into an
>>>> image>
>>>>
>>>> Jay Berryman
>>>> Systems Engineer, RHCT
>>>>
>>>>
>>>> This message and any attachments are intended only for the use of
>>>> the
>>>> addressee and may contain information that is privileged and
>>>> confidential.
>>>> If the reader of the message is not the intended recipient, or the
>>>> authorized agent of the intended recipient, you are hereby notified
>>>> that any
>>>> dissemination of this communication is strictly prohibited. If you
>>>> have
>>>> received this communication in error, please notify SITEL
>>>> immediately
>>>> by
>>>> telephone at 402.963.6001 and delete the message and any attachments
>>>> from
>>>> your system. Thank you for your cooperation
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: redhat-list-bounces at redhat.com
>>>> [mailto:redhat-list-bounces at redhat.com]
>>>> On Behalf Of Margaret Doll
>>>> Sent: Thursday, September 02, 2004 10:26 AM
>>>> To: General Red Hat Linux discussion list
>>>> Subject: Re: help on nautilus-cd-burner
>>>>
>>>> From the tail of /var/log/dmesg
>>>>
>>>> st: Version 20030406, bufsize 32768, max init. bufs 4, s/g segs 16
>>>> Attached scsi tape st0 at scsi0, channel 0, id 1, lun 0
>>>> Attached scsi tape st1 at scsi0, channel 0, id 2, lun 0
>>>> hdc: attached ide-scsi driver.
>>>> scsi1 : SCSI host adapter emulation for IDE ATAPI devices
>>>> Vendor: SONY Model: CD-RW CRX160E Rev: 1.0g
>>>> Type: CD-ROM ANSI SCSI revision: 02
>>>>
>>>>
>>>> From /var/log/messages: I don't see any error messages.
>>>>
>>>> Sep 2 08:13:28 geops kernel: Attached scsi tape st0 at scsi0,
>>>> channel
>>>> 0, id 1, lun 0
>>>> Sep 2 08:13:28 geops kernel: Attached scsi tape st1 at scsi0,
>>>> channel
>>>> 0, id 2, lun 0
>>>> Sep 2 08:13:28 geops kernel: hdc: attached ide-scsi driver.
>>>> Sep 2 08:13:28 geops kernel: scsi1 : SCSI host adapter emulation
>>>> for
>>>> IDE ATAPI devices
>>>> Sep 2 08:13:28 geops kernel: Vendor: SONY Model: CD-RW
>>>> CRX160E
>>>> Rev: 1.0g
>>>> Sep 2 08:13:28 geops kernel: Type: CD-ROM
>>>> ANSI SCSI revision: 02
>>>> Sep 2 08:13:28 geops kernel: IA-32 Microcode Update Driver: v1.13
>>>> <tigran at veritas.com>
>>>> Sep 2 08:13:28 geops kernel: microcode: CPU0 already at revision
>>>> 0x5
>>>> (current=0x5)
>>>> Sep 2 08:13:28 geops kernel: microcode: No suitable data for cpu 0
>>>> Sep 2 08:13:28 geops kernel: parport0: PC-style at 0x378 (0x778)
>>>> [PCSPP,TRISTATE,EPP]
>>>> Sep 2 08:13:28 geops kernel: parport0: irq 7 detected
>>>> Sep 2 08:13:28 geops kernel: Attached scsi CD-ROM sr0 at scsi1,
>>>> channel 0, id 0, lun 0
>>>> Sep 2 08:13:28 geops kernel: sr0: scsi3-mmc drive: 32x/32x writer
>>>> cd/rw xa/form2 cdda tray
>>>> Sep 2 08:13:28 geops kernel: Uniform CD-ROM driver Revision: 3.12
>>>> Sep 2 08:13:28 geops kernel: Attached scsi generic sg0 at scsi0,
>>>> channel 0, id 0, lun 0, type 8
>>>>
>>>> cat /proc/scsi/scsi
>>>> Attached devices:
>>>> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>>>> Vendor: QUALSTAR Model: TLS-4212i Rev: 2.09
>>>> Type: Medium Changer ANSI SCSI revision: 02
>>>> Host: scsi0 Channel: 00 Id: 01 Lun: 00
>>>> Vendor: SONY Model: SDX-500C Rev: 0107
>>>> Type: Sequential-Access ANSI SCSI revision: 02
>>>> Host: scsi0 Channel: 00 Id: 02 Lun: 00
>>>> Vendor: SONY Model: SDX-500C Rev: 010f
>>>> Type: Sequential-Access ANSI SCSI revision: 02
>>>> Host: scsi1 Channel: 00 Id: 00 Lun: 00
>>>> Vendor: SONY Model: CD-RW CRX160E Rev: 1.0g
>>>> Type: CD-ROM ANSI SCSI revision: 02
>>>>
>>>>
>>>>
>>>> On Thursday, September 2, 2004, at 11:07 AM, Jay Berryman wrote:
>>>>
>>>>> If you look through /var/log/messages you should see something
>>>>> similar
>>>>> to
>>>>> this:
>>>>>
>>>>> <hostname> kernel: hdc: attached ide-scsi driver
>>>>> <hostname> kernel: scsi0 : SCSI hsot adapter emulation for IDE
>>>>> ATAPI
>>>>> devices.
>>>>>
>>>>> The make and model of you CD-Writer should be listed below. You
>>>>> should also
>>>>> see the following line shortly thereafter:
>>>>>
>>>>> <hostname> kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id
>>>>> 0,
>>>>> lun 0
>>>>>
>>>>> The scsi channel, id, and lun numbers may vary. This should tell
>>>>> you
>>>>> which
>>>>> scsi bus your cd-writer is attached to and where it is located. It
>>>>> should
>>>>> also tell you what errors, if any, you might be having.
>>>>>
>>>>> Jay Berryman
>>>>> Systems Engineer, RHCT
>>>>>
>>>>>
>>>>> This message and any attachments are intended only for the use of
>>>>> the
>>>>> addressee and may contain information that is privileged and
>>>>> confidential.
>>>>> If the reader of the message is not the intended recipient, or the
>>>>> authorized agent of the intended recipient, you are hereby notified
>>>>> that any
>>>>> dissemination of this communication is strictly prohibited. If you
>>>>> have
>>>>> received this communication in error, please notify SITEL
>>>>> immediately
>>>>> by
>>>>> telephone at 402.963.6001 and delete the message and any
>>>>> attachments
>>>>> from
>>>>> your system. Thank you for your cooperation
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: redhat-list-bounces at redhat.com
>>>>> [mailto:redhat-list-bounces at redhat.com]
>>>>> On Behalf Of Margaret Doll
>>>>> Sent: Thursday, September 02, 2004 7:26 AM
>>>>> To: General Red Hat Linux discussion list
>>>>> Subject: Re: help on nautilus-cd-burner
>>>>>
>>>>> cdrecord - scanbus
>>>>>
>>>>> cdrecord: Device or resource busy. Cannot open '/dev/sg0'.
>>>>> Cannot
>>>>> open SCSI
>>>>> driver.
>>>>>
>>>>> /dev/sg0 has a Qualstar tape library attacted to it. The cd
>>>>> burner
>>>>> is
>>>>> on /dev/hdc.
>>>>>
>>>>>
>>>>> On Wednesday, September 1, 2004, at 05:55 PM, Jay Berryman wrote:
>>>>>
>>>>>> Have you tried using cdrecord from the command line? Running the
>>>>>> following
>>>>>> command should tell you if Linux can see the device or not.
>>>>>>
>>>>>> cdrecord -scanbus
>>>>>>
>>>>>> Jay Berryman
>>>>>> Systems Engineer, RHCT
>>>>>>
>>>>>>
>>>>>> This message and any attachments are intended only for the use of
>>>>>> the
>>>>>> addressee and may contain information that is privileged and
>>>>>> confidential.
>>>>>> If the reader of the message is not the intended recipient, or the
>>>>>> authorized agent of the intended recipient, you are hereby
>>>>>> notified
>>>>>> that any
>>>>>> dissemination of this communication is strictly prohibited. If
>>>>>> you
>>>>>> have
>>>>>> received this communication in error, please notify SITEL
>>>>>> immediately
>>>>>> by
>>>>>> telephone at 402.963.6001 and delete the message and any
>>>>>> attachments
>>>>>> from
>>>>>> your system. Thank you for your cooperation
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: redhat-list-bounces at redhat.com
>>>>>> [mailto:redhat-list-bounces at redhat.com]
>>>>>> On Behalf Of Margaret Doll
>>>>>> Sent: Wednesday, September 01, 2004 4:40 PM
>>>>>> To: redhat-list at redhat.com
>>>>>> Subject: help on nautilus-cd-burner
>>>>>>
>>>>>> I believe the problem I am having with nautilus-cd-burner and
>>>>>> xcdroast
>>>>>> running on RedHat Enterprise AS, is that neither program can
>>>>>> find
>>>>>> the
>>>>>> cd writer.
>>>>>>
>>>>>> /boot/grub/grub.conf contains
>>>>>>
>>>>>> kernel ... hdc=ide-scsi
>>>>>>
>>>>>> /etc/modules.conf contains no line with hdc or ide-scsi
>>>>>>
>>>>>> /sbin/insmod ide-scsi; /sbin/insmod sg
>>>>>>
>>>>>> says that both modules exist
>>>>>>
>>>>>> /var/log/dmesg contains
>>>>>>
>>>>>> hdc: SONY CD-RW CRX160E, ATAPI CD/DVD-ROM drive
>>>>>>
>>>>>> When I put a blank cd in the drive, nautilus-cd-burner starts up.
>>>>>>
>>>>>>
>>>>>> --
>>>>>> redhat-list mailing list
>>>>>> unsubscribe
>>>>>> mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>>>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>>>>
>>>>>>
>>>>>> --
>>>>>> redhat-list mailing list
>>>>>> unsubscribe
>>>>>> mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>>>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> redhat-list mailing list
>>>>> unsubscribe
>>>>> mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>>>
>>>>>
>>>>> --
>>>>> redhat-list mailing list
>>>>> unsubscribe
>>>>> mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>>>
>>>>
>>>>
>>>> --
>>>> redhat-list mailing list
>>>> unsubscribe
>>>> mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>>
>>>>
>>>> --
>>>> redhat-list mailing list
>>>> unsubscribe
>>>> mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>>
>>>
>>>
>>> --
>>> redhat-list mailing list
>>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>
>>>
>>> --
>>> redhat-list mailing list
>>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>
>>
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
More information about the redhat-list
mailing list