help on nautilus-cd-burner
Margaret Doll
Margaret_Doll at brown.edu
Thu Sep 2 17:36:25 UTC 2004
/dev/scd0
On Thursday, September 2, 2004, at 12:47 PM, Jay Berryman wrote:
> If you type in ls -la on /dev/cdrom what does it say?
>
> Jay Berryman
> Systems Engineer, RHCT
>
>
> This message and any attachments are intended only for the use of the
> addressee and may contain information that is privileged and
> confidential.
> If the reader of the message is not the intended recipient, or the
> authorized agent of the intended recipient, you are hereby notified
> that any
> dissemination of this communication is strictly prohibited. If you
> have
> received this communication in error, please notify SITEL immediately
> by
> telephone at 402.963.6001 and delete the message and any attachments
> from
> your system. Thank you for your cooperation
>
>
> -----Original Message-----
> From: redhat-list-bounces at redhat.com
> [mailto:redhat-list-bounces at redhat.com]
> On Behalf Of Margaret Doll
> Sent: Thursday, September 02, 2004 10:52 AM
> To: General Red Hat Linux discussion list
> Subject: Re: help on nautilus-cd-burner
>
> Jay,
>
> I get back
>
> cdrecord -v -eject dev=1,0,0 speed=8 FC2-i386-disc1.iso
> Cdredord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J rg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '1,0,0'
> scsibus: 1 target: 0 lun: 0
> cdrecord: Device or resource busy. Cannot open '/dev/sg0'. Cannot
> open SCSI driver.
> ...
>
>
> On Thursday, September 2, 2004, at 11:39 AM, Jay Berryman wrote:
>
>> See if you can run the following command then:
>>
>> cdrecord -v -eject dev=1,0,0 speed=8 <path of image file>
>>
>> If you need to make an image file to burn you can run this command:
>>
>> mkisofs -l -J -R -o <filename> <file or directory to be made into an
>> image>
>>
>> Jay Berryman
>> Systems Engineer, RHCT
>>
>>
>> This message and any attachments are intended only for the use of the
>> addressee and may contain information that is privileged and
>> confidential.
>> If the reader of the message is not the intended recipient, or the
>> authorized agent of the intended recipient, you are hereby notified
>> that any
>> dissemination of this communication is strictly prohibited. If you
>> have
>> received this communication in error, please notify SITEL immediately
>> by
>> telephone at 402.963.6001 and delete the message and any attachments
>> from
>> your system. Thank you for your cooperation
>>
>>
>> -----Original Message-----
>> From: redhat-list-bounces at redhat.com
>> [mailto:redhat-list-bounces at redhat.com]
>> On Behalf Of Margaret Doll
>> Sent: Thursday, September 02, 2004 10:26 AM
>> To: General Red Hat Linux discussion list
>> Subject: Re: help on nautilus-cd-burner
>>
>> From the tail of /var/log/dmesg
>>
>> st: Version 20030406, bufsize 32768, max init. bufs 4, s/g segs 16
>> Attached scsi tape st0 at scsi0, channel 0, id 1, lun 0
>> Attached scsi tape st1 at scsi0, channel 0, id 2, lun 0
>> hdc: attached ide-scsi driver.
>> scsi1 : SCSI host adapter emulation for IDE ATAPI devices
>> Vendor: SONY Model: CD-RW CRX160E Rev: 1.0g
>> Type: CD-ROM ANSI SCSI revision: 02
>>
>>
>> From /var/log/messages: I don't see any error messages.
>>
>> Sep 2 08:13:28 geops kernel: Attached scsi tape st0 at scsi0, channel
>> 0, id 1, lun 0
>> Sep 2 08:13:28 geops kernel: Attached scsi tape st1 at scsi0, channel
>> 0, id 2, lun 0
>> Sep 2 08:13:28 geops kernel: hdc: attached ide-scsi driver.
>> Sep 2 08:13:28 geops kernel: scsi1 : SCSI host adapter emulation for
>> IDE ATAPI devices
>> Sep 2 08:13:28 geops kernel: Vendor: SONY Model: CD-RW
>> CRX160E
>> Rev: 1.0g
>> Sep 2 08:13:28 geops kernel: Type: CD-ROM
>> ANSI SCSI revision: 02
>> Sep 2 08:13:28 geops kernel: IA-32 Microcode Update Driver: v1.13
>> <tigran at veritas.com>
>> Sep 2 08:13:28 geops kernel: microcode: CPU0 already at revision 0x5
>> (current=0x5)
>> Sep 2 08:13:28 geops kernel: microcode: No suitable data for cpu 0
>> Sep 2 08:13:28 geops kernel: parport0: PC-style at 0x378 (0x778)
>> [PCSPP,TRISTATE,EPP]
>> Sep 2 08:13:28 geops kernel: parport0: irq 7 detected
>> Sep 2 08:13:28 geops kernel: Attached scsi CD-ROM sr0 at scsi1,
>> channel 0, id 0, lun 0
>> Sep 2 08:13:28 geops kernel: sr0: scsi3-mmc drive: 32x/32x writer
>> cd/rw xa/form2 cdda tray
>> Sep 2 08:13:28 geops kernel: Uniform CD-ROM driver Revision: 3.12
>> Sep 2 08:13:28 geops kernel: Attached scsi generic sg0 at scsi0,
>> channel 0, id 0, lun 0, type 8
>>
>> cat /proc/scsi/scsi
>> Attached devices:
>> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>> Vendor: QUALSTAR Model: TLS-4212i Rev: 2.09
>> Type: Medium Changer ANSI SCSI revision: 02
>> Host: scsi0 Channel: 00 Id: 01 Lun: 00
>> Vendor: SONY Model: SDX-500C Rev: 0107
>> Type: Sequential-Access ANSI SCSI revision: 02
>> Host: scsi0 Channel: 00 Id: 02 Lun: 00
>> Vendor: SONY Model: SDX-500C Rev: 010f
>> Type: Sequential-Access ANSI SCSI revision: 02
>> Host: scsi1 Channel: 00 Id: 00 Lun: 00
>> Vendor: SONY Model: CD-RW CRX160E Rev: 1.0g
>> Type: CD-ROM ANSI SCSI revision: 02
>>
>>
>>
>> On Thursday, September 2, 2004, at 11:07 AM, Jay Berryman wrote:
>>
>>> If you look through /var/log/messages you should see something
>>> similar
>>> to
>>> this:
>>>
>>> <hostname> kernel: hdc: attached ide-scsi driver
>>> <hostname> kernel: scsi0 : SCSI hsot adapter emulation for IDE ATAPI
>>> devices.
>>>
>>> The make and model of you CD-Writer should be listed below. You
>>> should also
>>> see the following line shortly thereafter:
>>>
>>> <hostname> kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id
>>> 0,
>>> lun 0
>>>
>>> The scsi channel, id, and lun numbers may vary. This should tell you
>>> which
>>> scsi bus your cd-writer is attached to and where it is located. It
>>> should
>>> also tell you what errors, if any, you might be having.
>>>
>>> Jay Berryman
>>> Systems Engineer, RHCT
>>>
>>>
>>> This message and any attachments are intended only for the use of the
>>> addressee and may contain information that is privileged and
>>> confidential.
>>> If the reader of the message is not the intended recipient, or the
>>> authorized agent of the intended recipient, you are hereby notified
>>> that any
>>> dissemination of this communication is strictly prohibited. If you
>>> have
>>> received this communication in error, please notify SITEL immediately
>>> by
>>> telephone at 402.963.6001 and delete the message and any attachments
>>> from
>>> your system. Thank you for your cooperation
>>>
>>>
>>> -----Original Message-----
>>> From: redhat-list-bounces at redhat.com
>>> [mailto:redhat-list-bounces at redhat.com]
>>> On Behalf Of Margaret Doll
>>> Sent: Thursday, September 02, 2004 7:26 AM
>>> To: General Red Hat Linux discussion list
>>> Subject: Re: help on nautilus-cd-burner
>>>
>>> cdrecord - scanbus
>>>
>>> cdrecord: Device or resource busy. Cannot open '/dev/sg0'. Cannot
>>> open SCSI
>>> driver.
>>>
>>> /dev/sg0 has a Qualstar tape library attacted to it. The cd burner
>>> is
>>> on /dev/hdc.
>>>
>>>
>>> On Wednesday, September 1, 2004, at 05:55 PM, Jay Berryman wrote:
>>>
>>>> Have you tried using cdrecord from the command line? Running the
>>>> following
>>>> command should tell you if Linux can see the device or not.
>>>>
>>>> cdrecord -scanbus
>>>>
>>>> Jay Berryman
>>>> Systems Engineer, RHCT
>>>>
>>>>
>>>> This message and any attachments are intended only for the use of
>>>> the
>>>> addressee and may contain information that is privileged and
>>>> confidential.
>>>> If the reader of the message is not the intended recipient, or the
>>>> authorized agent of the intended recipient, you are hereby notified
>>>> that any
>>>> dissemination of this communication is strictly prohibited. If you
>>>> have
>>>> received this communication in error, please notify SITEL
>>>> immediately
>>>> by
>>>> telephone at 402.963.6001 and delete the message and any attachments
>>>> from
>>>> your system. Thank you for your cooperation
>>>>
>>>> -----Original Message-----
>>>> From: redhat-list-bounces at redhat.com
>>>> [mailto:redhat-list-bounces at redhat.com]
>>>> On Behalf Of Margaret Doll
>>>> Sent: Wednesday, September 01, 2004 4:40 PM
>>>> To: redhat-list at redhat.com
>>>> Subject: help on nautilus-cd-burner
>>>>
>>>> I believe the problem I am having with nautilus-cd-burner and
>>>> xcdroast
>>>> running on RedHat Enterprise AS, is that neither program can find
>>>> the
>>>> cd writer.
>>>>
>>>> /boot/grub/grub.conf contains
>>>>
>>>> kernel ... hdc=ide-scsi
>>>>
>>>> /etc/modules.conf contains no line with hdc or ide-scsi
>>>>
>>>> /sbin/insmod ide-scsi; /sbin/insmod sg
>>>>
>>>> says that both modules exist
>>>>
>>>> /var/log/dmesg contains
>>>>
>>>> hdc: SONY CD-RW CRX160E, ATAPI CD/DVD-ROM drive
>>>>
>>>> When I put a blank cd in the drive, nautilus-cd-burner starts up.
>>>>
>>>>
>>>> --
>>>> redhat-list mailing list
>>>> unsubscribe
>>>> mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>>
>>>>
>>>> --
>>>> redhat-list mailing list
>>>> unsubscribe
>>>> mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>>
>>>
>>>
>>> --
>>> redhat-list mailing list
>>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>
>>>
>>> --
>>> redhat-list mailing list
>>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>
>>
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
More information about the redhat-list
mailing list