help on nautilus-cd-burner - solved with anther problem
Margaret Doll
Margaret_Doll at Brown.Edu
Thu Sep 2 18:32:45 UTC 2004
Jay,
I turned off the qualstar library and rebooted the computer.
"cdrecord -scanbus" now sees the writeable cd. I am running xcdroast
now.
The next problem I created. I have another system identical to
the one with a writeable cd in terms of the RedHat software and having
a qualstar library attached to it. The second system has a cdrom that
is not writeable.
"ls -al /dev/cdrom " showed a link to /dev/hdc on the second system.
I tried to change the link on the first system to match the second.
by removing /dev/cdrom and making a soft link to /dev/hdc. That was a
mistake. The soft link does not remain on a reboot and when a readable
cd is mounted on the system I get:
mount: wrong fs type, bad option, bad superblock on /dev/cdrom,
or too many mounted file systems
(could this be the IDE device where you in fact use
ide-scsi so that sr0 or sda or so is needed?)
I experimented too much.
Is there a way to get /dev/cdrom correctly linked? Hopefully the
correct
link will allow me to create cds while the Qualstar library is attached.
On Thursday, September 2, 2004, at 02:01 PM, Jay Berryman wrote:
> It looks like xcdroast is trying to use your qualstar library instead
> of
> your cd-writer, even though you are defining which scsi bus it is on.
> Try
> removing the qualstar library and see if that helps.
>
> Jay Berryman
> Systems Engineer, RHCT
>
>
> This message and any attachments are intended only for the use of the
> addressee and may contain information that is privileged and
> confidential.
> If the reader of the message is not the intended recipient, or the
> authorized agent of the intended recipient, you are hereby notified
> that any
> dissemination of this communication is strictly prohibited. If you
> have
> received this communication in error, please notify SITEL immediately
> by
> telephone at 402.963.6001 and delete the message and any attachments
> from
> your system. Thank you for your cooperation
>
>
> -----Original Message-----
> From: redhat-list-bounces at redhat.com
> [mailto:redhat-list-bounces at redhat.com]
> On Behalf Of Margaret Doll
> Sent: Thursday, September 02, 2004 12:36 PM
> To: General Red Hat Linux discussion list
> Subject: Re: help on nautilus-cd-burner
>
> /dev/scd0
> On Thursday, September 2, 2004, at 12:47 PM, Jay Berryman wrote:
>
>> If you type in ls -la on /dev/cdrom what does it say?
>>
>> Jay Berryman
>> Systems Engineer, RHCT
>>
>>
>> This message and any attachments are intended only for the use of the
>> addressee and may contain information that is privileged and
>> confidential.
>> If the reader of the message is not the intended recipient, or the
>> authorized agent of the intended recipient, you are hereby notified
>> that any
>> dissemination of this communication is strictly prohibited. If you
>> have
>> received this communication in error, please notify SITEL immediately
>> by
>> telephone at 402.963.6001 and delete the message and any attachments
>> from
>> your system. Thank you for your cooperation
>>
>>
>> -----Original Message-----
>> From: redhat-list-bounces at redhat.com
>> [mailto:redhat-list-bounces at redhat.com]
>> On Behalf Of Margaret Doll
>> Sent: Thursday, September 02, 2004 10:52 AM
>> To: General Red Hat Linux discussion list
>> Subject: Re: help on nautilus-cd-burner
>>
>> Jay,
>>
>> I get back
>>
>> cdrecord -v -eject dev=1,0,0 speed=8 FC2-i386-disc1.iso
>> Cdredord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J rg
>> Schilling
>> TOC Type: 1 = CD-ROM
>> scsidev: '1,0,0'
>> scsibus: 1 target: 0 lun: 0
>> cdrecord: Device or resource busy. Cannot open '/dev/sg0'. Cannot
>> open SCSI driver.
>> ...
>>
>>
>> On Thursday, September 2, 2004, at 11:39 AM, Jay Berryman wrote:
>>
>>> See if you can run the following command then:
>>>
>>> cdrecord -v -eject dev=1,0,0 speed=8 <path of image file>
>>>
>>> If you need to make an image file to burn you can run this command:
>>>
>>> mkisofs -l -J -R -o <filename> <file or directory to be made into an
>>> image>
>>>
>>> Jay Berryman
>>> Systems Engineer, RHCT
>>>
>>>
>>> This message and any attachments are intended only for the use of the
>>> addressee and may contain information that is privileged and
>>> confidential.
>>> If the reader of the message is not the intended recipient, or the
>>> authorized agent of the intended recipient, you are hereby notified
>>> that any
>>> dissemination of this communication is strictly prohibited. If you
>>> have
>>> received this communication in error, please notify SITEL immediately
>>> by
>>> telephone at 402.963.6001 and delete the message and any attachments
>>> from
>>> your system. Thank you for your cooperation
>>>
>>>
>>> -----Original Message-----
>>> From: redhat-list-bounces at redhat.com
>>> [mailto:redhat-list-bounces at redhat.com]
>>> On Behalf Of Margaret Doll
>>> Sent: Thursday, September 02, 2004 10:26 AM
>>> To: General Red Hat Linux discussion list
>>> Subject: Re: help on nautilus-cd-burner
>>>
>>> From the tail of /var/log/dmesg
>>>
>>> st: Version 20030406, bufsize 32768, max init. bufs 4, s/g segs 16
>>> Attached scsi tape st0 at scsi0, channel 0, id 1, lun 0
>>> Attached scsi tape st1 at scsi0, channel 0, id 2, lun 0
>>> hdc: attached ide-scsi driver.
>>> scsi1 : SCSI host adapter emulation for IDE ATAPI devices
>>> Vendor: SONY Model: CD-RW CRX160E Rev: 1.0g
>>> Type: CD-ROM ANSI SCSI revision: 02
>>>
>>>
>>> From /var/log/messages: I don't see any error messages.
>>>
>>> Sep 2 08:13:28 geops kernel: Attached scsi tape st0 at scsi0,
>>> channel
>>> 0, id 1, lun 0
>>> Sep 2 08:13:28 geops kernel: Attached scsi tape st1 at scsi0,
>>> channel
>>> 0, id 2, lun 0
>>> Sep 2 08:13:28 geops kernel: hdc: attached ide-scsi driver.
>>> Sep 2 08:13:28 geops kernel: scsi1 : SCSI host adapter emulation for
>>> IDE ATAPI devices
>>> Sep 2 08:13:28 geops kernel: Vendor: SONY Model: CD-RW
>>> CRX160E
>>> Rev: 1.0g
>>> Sep 2 08:13:28 geops kernel: Type: CD-ROM
>>> ANSI SCSI revision: 02
>>> Sep 2 08:13:28 geops kernel: IA-32 Microcode Update Driver: v1.13
>>> <tigran at veritas.com>
>>> Sep 2 08:13:28 geops kernel: microcode: CPU0 already at revision 0x5
>>> (current=0x5)
>>> Sep 2 08:13:28 geops kernel: microcode: No suitable data for cpu 0
>>> Sep 2 08:13:28 geops kernel: parport0: PC-style at 0x378 (0x778)
>>> [PCSPP,TRISTATE,EPP]
>>> Sep 2 08:13:28 geops kernel: parport0: irq 7 detected
>>> Sep 2 08:13:28 geops kernel: Attached scsi CD-ROM sr0 at scsi1,
>>> channel 0, id 0, lun 0
>>> Sep 2 08:13:28 geops kernel: sr0: scsi3-mmc drive: 32x/32x writer
>>> cd/rw xa/form2 cdda tray
>>> Sep 2 08:13:28 geops kernel: Uniform CD-ROM driver Revision: 3.12
>>> Sep 2 08:13:28 geops kernel: Attached scsi generic sg0 at scsi0,
>>> channel 0, id 0, lun 0, type 8
>>>
>>> cat /proc/scsi/scsi
>>> Attached devices:
>>> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>>> Vendor: QUALSTAR Model: TLS-4212i Rev: 2.09
>>> Type: Medium Changer ANSI SCSI revision: 02
>>> Host: scsi0 Channel: 00 Id: 01 Lun: 00
>>> Vendor: SONY Model: SDX-500C Rev: 0107
>>> Type: Sequential-Access ANSI SCSI revision: 02
>>> Host: scsi0 Channel: 00 Id: 02 Lun: 00
>>> Vendor: SONY Model: SDX-500C Rev: 010f
>>> Type: Sequential-Access ANSI SCSI revision: 02
>>> Host: scsi1 Channel: 00 Id: 00 Lun: 00
>>> Vendor: SONY Model: CD-RW CRX160E Rev: 1.0g
>>> Type: CD-ROM ANSI SCSI revision: 02
>>>
>>>
>>>
>>> On Thursday, September 2, 2004, at 11:07 AM, Jay Berryman wrote:
>>>
>>>> If you look through /var/log/messages you should see something
>>>> similar
>>>> to
>>>> this:
>>>>
>>>> <hostname> kernel: hdc: attached ide-scsi driver
>>>> <hostname> kernel: scsi0 : SCSI hsot adapter emulation for IDE ATAPI
>>>> devices.
>>>>
>>>> The make and model of you CD-Writer should be listed below. You
>>>> should also
>>>> see the following line shortly thereafter:
>>>>
>>>> <hostname> kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id
>>>> 0,
>>>> lun 0
>>>>
>>>> The scsi channel, id, and lun numbers may vary. This should tell
>>>> you
>>>> which
>>>> scsi bus your cd-writer is attached to and where it is located. It
>>>> should
>>>> also tell you what errors, if any, you might be having.
>>>>
>>>> Jay Berryman
>>>> Systems Engineer, RHCT
>>>>
>>>>
>>>> This message and any attachments are intended only for the use of
>>>> the
>>>> addressee and may contain information that is privileged and
>>>> confidential.
>>>> If the reader of the message is not the intended recipient, or the
>>>> authorized agent of the intended recipient, you are hereby notified
>>>> that any
>>>> dissemination of this communication is strictly prohibited. If you
>>>> have
>>>> received this communication in error, please notify SITEL
>>>> immediately
>>>> by
>>>> telephone at 402.963.6001 and delete the message and any attachments
>>>> from
>>>> your system. Thank you for your cooperation
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: redhat-list-bounces at redhat.com
>>>> [mailto:redhat-list-bounces at redhat.com]
>>>> On Behalf Of Margaret Doll
>>>> Sent: Thursday, September 02, 2004 7:26 AM
>>>> To: General Red Hat Linux discussion list
>>>> Subject: Re: help on nautilus-cd-burner
>>>>
>>>> cdrecord - scanbus
>>>>
>>>> cdrecord: Device or resource busy. Cannot open '/dev/sg0'. Cannot
>>>> open SCSI
>>>> driver.
>>>>
>>>> /dev/sg0 has a Qualstar tape library attacted to it. The cd burner
>>>> is
>>>> on /dev/hdc.
>>>>
>>>>
>>>> On Wednesday, September 1, 2004, at 05:55 PM, Jay Berryman wrote:
>>>>
>>>>> Have you tried using cdrecord from the command line? Running the
>>>>> following
>>>>> command should tell you if Linux can see the device or not.
>>>>>
>>>>> cdrecord -scanbus
>>>>>
>>>>> Jay Berryman
>>>>> Systems Engineer, RHCT
>>>>>
>>>>>
>>>>> This message and any attachments are intended only for the use of
>>>>> the
>>>>> addressee and may contain information that is privileged and
>>>>> confidential.
>>>>> If the reader of the message is not the intended recipient, or the
>>>>> authorized agent of the intended recipient, you are hereby notified
>>>>> that any
>>>>> dissemination of this communication is strictly prohibited. If you
>>>>> have
>>>>> received this communication in error, please notify SITEL
>>>>> immediately
>>>>> by
>>>>> telephone at 402.963.6001 and delete the message and any
>>>>> attachments
>>>>> from
>>>>> your system. Thank you for your cooperation
>>>>>
>>>>> -----Original Message-----
>>>>> From: redhat-list-bounces at redhat.com
>>>>> [mailto:redhat-list-bounces at redhat.com]
>>>>> On Behalf Of Margaret Doll
>>>>> Sent: Wednesday, September 01, 2004 4:40 PM
>>>>> To: redhat-list at redhat.com
>>>>> Subject: help on nautilus-cd-burner
>>>>>
>>>>> I believe the problem I am having with nautilus-cd-burner and
>>>>> xcdroast
>>>>> running on RedHat Enterprise AS, is that neither program can find
>>>>> the
>>>>> cd writer.
>>>>>
>>>>> /boot/grub/grub.conf contains
>>>>>
>>>>> kernel ... hdc=ide-scsi
>>>>>
>>>>> /etc/modules.conf contains no line with hdc or ide-scsi
>>>>>
>>>>> /sbin/insmod ide-scsi; /sbin/insmod sg
>>>>>
>>>>> says that both modules exist
>>>>>
>>>>> /var/log/dmesg contains
>>>>>
>>>>> hdc: SONY CD-RW CRX160E, ATAPI CD/DVD-ROM drive
>>>>>
>>>>> When I put a blank cd in the drive, nautilus-cd-burner starts up.
>>>>>
>>>>>
>>>>> --
>>>>> redhat-list mailing list
>>>>> unsubscribe
>>>>> mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>>>
>>>>>
>>>>> --
>>>>> redhat-list mailing list
>>>>> unsubscribe
>>>>> mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>>>
>>>>
>>>>
>>>> --
>>>> redhat-list mailing list
>>>> unsubscribe
>>>> mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>>
>>>>
>>>> --
>>>> redhat-list mailing list
>>>> unsubscribe
>>>> mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>>
>>>
>>>
>>> --
>>> redhat-list mailing list
>>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>
>>>
>>> --
>>> redhat-list mailing list
>>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>>
>>
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
More information about the redhat-list
mailing list