Still having problem with the device links

[Margaret Doll]

I got the tape library back online by running kudzu and then rebooting.

The /dev/cdrom still points to /dev/scd0 instead of /dev/hdc.  Is there 
anyway
of fixing this link permanently so that I can read the cds on the cdrom 
and
write to the device without turning off the library and rebooting.

On Tuesday, September 7, 2004, at 04:06 PM, Margaret Doll wrote:

> I was orginally having problems with xcdroast because /dev/cdrom was 
> linked to /dev/scd0.  scsi 0 or sg0 has a qualstar tape library with 
> two tape drives attached to it.  scsi 1 has a read-writeable cdrom 
> attached to it.
>
> From  "tail" of /var/log/dmesg
>
> Attached scsi tape st0 at scsi0, channel 0, id 1, lun 0
> Attached scsi tape st1 at scsi0, channel 1, id2, lun 0
> hdc:  attached ide-scsi driver.
> scsi1  : SCSI host adapter emulation ofr IDE ATAPI devices
>   Vendor:  SONY  Model:  CD-RW CRX160E...
>   Type CD-ROM
>
> I had to turn off the tape drive and reboot the system to get
> "cdrecord -scanbus" to see the writeable cd.
>
> When I shutdown the system, turn the library back on, and reboot, the 
> backup software can no longer see the tape library.
>
> How do I get the scsi devices set up correctly?
>
> I have another system with almost the same setup (the cdrom is not 
> writeable), but its devices are defined correctly.
>
>
>
>
> -- 
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>