kernel panic after recompile

Bill McCormick wpmccormick at sbcglobal.net
Thu Feb 10 02:45:35 UTC 2005


Geoff Rainey (DSL AK) said the following on 2/9/2005 2:56 PM:

>Frustrating - I have had this many times, and it requires a thorough understanding on both the recompilation details and the boot process. It will be something like your kernel cannot mount the root filesystem and this is because either you do not have the disk device drivers compiled into the kernel, or they are not included in the initial RAM disk image which makes device drivers available for the kernel during the boot process. 
>  
>
OK. This makes sense. From dmesg ..

Copyright (c) 1999-2002 LSI Logic Corporation
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
mptbase: 1 MPT adapter found, 1 installed.
Fusion MPT SCSI Host driver 2.03.00
scsi0 : ioc0: LSI53C1030, FwRev=01000c00h, Ports=1, MaxQ=255, IRQ=29
blk: queue c383b418, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
3ware Storage Controller device driver for Linux v1.02.00.031.
scsi1 : Found a 3ware Storage Controller at 0xd8f0, IRQ: 20, P-chip: 1.3
scsi1 : 3ware Storage Controller
  Vendor: 3ware     Model: 3w-xxxx           Rev: 1.0
  Type:   Direct-Access                      ANSI SCSI revision: 00
blk: queue c383b218, I/O limit 4095Mb (mask 0xffffffff)
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 156247952 512-byte hdwr sectors (79999 MB)

I have a Raid 1? (mirroring) running on the LSI that I need to focus on 
here.

Thanks

>
>-----Original Message-----
>From: redhat-list-bounces at redhat.com on behalf of Karasik, Vitaly
>Sent: Wed 2/9/2005 10:46 PM
>To: General Red Hat Linux discussion list
>Subject: RE: kernel panic after recompile
> 
>I guess, you took RH config file as basic for your custom kernel and already read RH "building custom kernel" manual; if no, you should do it.
>
>And off-topic question - are you sure you need re-compile kernel? In many cases you may customize kernel without re-compilation.
>
>Rgds,
>Vitaly Karasik, RHCE
>
>-----Original Message-----
>From: redhat-list-bounces at redhat.com
>[mailto:redhat-list-bounces at redhat.com]On Behalf Of Bill
>Sent: Wednesday, February 09, 2005 5:37 AM
>To: General Red Hat Linux discussion list
>Subject: kernel panic after recompile
>
>
>Hello,
>
>I'm trying to recompile my kernel from the original source but when
>booting from it I get kernel panic.
>
>Where do I begin troubleshooting this?
>***********************************************************************************
>Information contained in this email message is intended only for use of the individual or entity named above. If the reader of this message is not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify the postmaster at nds.com and destroy the original message.
>***********************************************************************************
>
>  
>




More information about the redhat-list mailing list