system down - can't find luns (correction)

[Dana Holland]

Rigler, Stephen C. wrote:
> I'm assuming the last 2 entries in /proc/scsi/scsi are your IBM array?
> Does /var/log/dmesg give you any clues as to what /dev/sd* entries they
> would be mapped to (you should see things like "Attached scsi disk sda
> at scsi0, channel 0, id 0, lun 0")?
> 

Yeah, here's what that file has:

qla2x00_detect num_hosts=1
scsi-qla0-adapter-port=210000e08b1b54dc\;
scsi-qla0-tgt-0-di-0-node=200400a0b8110d14\;
scsi-qla0-tgt-0-di-0-port=200500a0b8110d15\;
scsi-qla0-tgt-0-di-0-control=00\;
scsi-qla0-tgt-0-di-0-preferred=ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff\;
scsi-qla1-adapter-port=210000e08b1b4b8a\;
scsi-qla1-tgt-0-di-1-node=200400a0b8110d14\;
scsi-qla1-tgt-0-di-1-port=200400a0b8110d15\;
scsi-qla1-tgt-0-di-1-control=80\;
scsi1 : QLogic QLA2312 PCI to Fibre Channel Host Adapter: bus 9 device 4 
irq 82
         Firmware version:  3.03.06, Driver version 7.03.00-fo

scsi2 : QLogic QLA2312 PCI to Fibre Channel Host Adapter: bus 10 device 
3 irq 77
         Firmware version:  3.03.06, Driver version 7.03.00-fo

blk: queue f630b018, I/O limit 4095Mb (mask 0xffffffff)
   Vendor: IBM       Model: 3542              Rev: 0520
   Type:   Direct-Access                      ANSI SCSI revision: 03
blk: queue f602be18, I/O limit 4095Mb (mask 0xffffffff)
   Vendor: IBM       Model: 3542              Rev: 0520
   Type:   Direct-Access                      ANSI SCSI revision: 03
blk: queue f602bc18, I/O limit 4095Mb (mask 0xffffffff)
scsi(1:0:0:0): Enabled tagged queuing, queue depth 32.
scsi(1:0:0:1): Enabled tagged queuing, queue depth 32.
blk: queue f602bc18, I/O limit 4095Mb (mask 0xffffffff)
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Attached scsi disk sdc at scsi1, channel 0, id 0, lun 1
SCSI device sdb: 285212672 512-byte hdwr sectors (146029 MB)
  sdb: sdb1
SCSI device sdc: 288118784 512-byte hdwr sectors (147517 MB)
  sdc: sdc1