Problems to Install Oracle Client 10g over Red Hat AS 3.0update3

Fábio Augusto fabiomirmar at gmail.com
Wed Nov 16 15:06:03 UTC 2005 

Nick ;-), Mr. Smith,

Okay, let's try to use the up2date for this installation...

Thanks by the advice about 2.4 / 2.6 kernel... =0)

If you have any other sugestion for this installation, I would be very glad...

Regards,

2005/11/16, Smith, Albert <Albert.Smith at genexservices.com>:
> Opps I just reread the message it's the client not the database. Sorry ignore what I said.
>
> Albert Smith
> Sr. Unix Systems Administrator
> HPCSA, RHCT
> Genex Services
> 440 E. Swedesford Rd.
> Wayne, PA 19087
> albert.smith at genexservices.com
> (610) 964-5154
>
>
>
> > -----Original Message-----
> > From: redhat-list-bounces at redhat.com
> > [mailto:redhat-list-bounces at redhat.com] On Behalf Of Smith, Albert
> > Sent: Wednesday, November 16, 2005 9:35 AM
> > To: General Red Hat Linux discussion list
> > Subject: RE: Problems to Install Oracle Client 10g over Red
> > Hat AS 3.0update3
> >
> > The only thing I want to add is I would not put 10G on AS3 I
> > would use AS4 and make sure it's 10GR2. The 2.4 kernel has a
> > problem with the way it handles the free memory with Oracle.
> > The dirty pages don't always flush out which causes memory to
> > be locked and unusable. The only solution we were able to
> > come up with was to reboot the server on an nightly basis as
> > shutting down oracle doesn't resolve the issue in whole. We
> > have done testing with the 2.6.9 kernel and it seems to have
> > handled the memory a lot better in this aspect. I am
> > currently testing AS4 with 9i, 10GR1 and will be testing with
> > 10GR2 and so far 2 weeks and no reboot needed.
> >
> >
> >
> > Albert Smith
> > Sr. Unix Systems Administrator
> > HPCSA, RHCT
> > Genex Services
> > 440 E. Swedesford Rd.
> > Wayne, PA 19087
> > albert.smith at genexservices.com
> > (610) 964-5154
> >
> >
> >
> > > -----Original Message-----
> > > From: redhat-list-bounces at redhat.com
> > > [mailto:redhat-list-bounces at redhat.com] On Behalf Of Fábio Augusto
> > > Sent: Wednesday, November 16, 2005 9:26 AM
> > > To: General Red Hat Linux discussion list
> > > Subject: Re: Problems to Install Oracle Client 10g over Red
> > > Hat AS 3.0update3
> > >
> > > Hi Mr. Lunt,
> > >
> > > I don't like to use the --nodeps too, that's the last choice
> > > to the administrator. I didn't try to install it using
> > > neither the Uvh or up2date.
> > >
> > > I would like to know how do you install both these packadges
> > > on your Opteron Servers. I believe that you have two
> > > packadges, one for 32 and the other for 64 bits architecture.
> > > If you have to install both, how do you use to do it?
> > >
> > > Thanks again!!
> > >
> > > 2005/11/16, Lunt, Nick <Nick.Lunt at wesleyan.co.uk>:
> > > > Hi,
> > > >
> > > > All my 64 bit machines with Oracle on are AMD, Im afraid I
> > > have no experience of POWER 5 servers.
> > > >
> > > > Personally I would not use the nodeps arg to RPM on a
> > > production machine.
> > > >
> > > > I take it that you have tried to install the RPM's with rpm
> > > -Uvh instead of -ivh too ?
> > > > Also I would suggest trying to install the required
> > > packages using up2date.
> > > >
> > > > I don't know if either of those methods will work. We had a
> > > situation
> > > > here a couple of weeks ago where one of our junior admins
> > > made a mess
> > > > of RPM on a server by using nodeps etc with important
> > > library packages, and they ended up having to reinstall !
> > > >
> > > > Good Luck,
> > > > Nick .
> > > >
> > > > > -----Original Message-----
> > > > > From: Fábio Augusto [mailto:fabiomirmar at gmail.com]
> > > > > Sent: 16 November 2005 13:08
> > > > > To: General Red Hat Linux discussion list
> > > > > Subject: Re: Problems to Install Oracle Client 10g over
> > Red Hat AS
> > > > > 3.0update3
> > > > >
> > > > >
> > > > > Mr. Lunt,
> > > > >
> > > > > First of all, thanks a lot by answering my message.
> > > > >
> > > > > Some libraries were already installed using both the 32
> > > and 64 bit
> > > > > packages. If I use the command rpm -ql package, I'm
> > going to see
> > > > > some libraries under the /lib directory and the same
> > > library under
> > > > > the /lib64.
> > > > >
> > > > > The processor used by the Open Power Server is under the
> > > IBM POWER
> > > > > architecture. If I'm not wrong, this is a POWER 5 processor.
> > > > >
> > > > > The great question is: Not all the libraries were
> > > installed, and now
> > > > > I have to do it, so in the installation media, I have
> > > some packadges
> > > > > called packagename-version.ppc.rpm and other packadges called
> > > > > packagename-version.ppc64.rpm, but If I install one of
> > > them and then
> > > > > try to install the other, I receive the message filed
> > to install,
> > > > > packadge packagename-version.ppc64.rpm conflicts with
> > > > > packagename-version.ppc.rpm already installed.
> > > > >
> > > > > What should I do? Which is the best way to install those
> > > packadges?
> > > > > Is it safe to use rpm -ivh
> > packagename-version.ppc64.rpm --nodeps?
> > > > >
> > > > > Thanks a lot once more.
> > > > >
> > > > > 2005/11/16, Lunt, Nick <Nick.Lunt at wesleyan.co.uk>:
> > > > > > You can install both the 64 and 32 bit versions of glibc,
> > > > > libstdc++ etc.
> > > > > >
> > > > > > [root at bounty user_scripts]# rpm -q glibc glibc-devel
> > > > > > glibc-2.3.4-2.13
> > > > > > glibc-2.3.4-2.13
> > > > > > glibc-devel-2.3.4-2.13
> > > > > > glibc-devel-2.3.4-2.13
> > > > > >
> > > > > > I can then query which is which by running rpm -qil glibc
> > > > > which will give me the info for both the 32 and 64 bit versions.
> > > > > >
> > > > > > If you having trouble installed the 32 and 64 bit versions
> > > > > then there may be some other errors that are causing this.
> > > > > >
> > > > > > Good luck,
> > > > > > Nick .
> > > > > >
> > > > > >
> > > > > >  -----Original Message-----
> > > > > > > From: redhat-list-bounces at redhat.com
> > > > > > > [mailto:redhat-list-bounces at redhat.com]
> > > > > > > On Behalf Of Fábio Augusto
> > > > > > > Sent: Wednesday, November 16, 2005 5:21 AM
> > > > > > > To: Lista Red Hat
> > > > > > > Subject: Problems to Install Oracle Client 10g over
> > > Red Hat AS
> > > > > > > 3.0 update 3
> > > > > > >
> > > > > > > Good Evening for everyone,
> > > > > > >
> > > > > > >         I'm working on the installation of a Red Hat AS
> > > > > 3.0 update 3
> > > > > > > Linux for a client. The Orable DBA sent me an e-mail
> > > > > asking about the
> > > > > > > installation of some pre-requisite packages for linux.
> > > > > > >
> > > > > > >         I've installed all the required pre-requisite
> > > > > packages over
> > > > > > > linux, but I read something strange on the Documentation
> > > > > for Oracle
> > > > > > > Client installation. This documentation asks for the
> > > following
> > > > > > > packages to be installed using both 64 and 32 bits RPMs:
> > > > > > >
> > > > > > > libgcc-3.2.3-42
> > > > > > > libstdc++-3.2.3-42
> > > > > > > libstdc++-devel-3.2.3-42
> > > > > > > glibc-2.3.2-95.27
> > > > > > > glibc-devel-2*
> > > > > > >
> > > > > > >         I'm using a Open Power (pSeries - 64 bits)
> > > Server. If I
> > > > > > > install the 64 bit package of any of those and then try
> > > > > to install the
> > > > > > > 32 bits package, I'm going to receive and error message
> > > > > telling that
> > > > > > > the installation conflicts with the package already
> > installed.
> > > > > > >
> > > > > > > Does anyone here have already tryied to install two
> > > versions of
> > > > > > > package on the same machine? How can I install
> > without having
> > > > > > > the conflict? Does anyone have successfully installed an
> > > > > Oracle Client 10g
> > > > > > > over a Red Hat AS 3 update 3? Which is the best way
> > > to do this
> > > > > > > installation?
> > > > > > >
> > > > > > > Thanks a Lot!!
> > > > > > >
> > > > > > > Regards,
> > > > > > > --
> > > > > > > Fábio Augusto Miranda Martins
> > > > > > > Fone: 6202-3897 / 6987-0590
> > > > > > > Cel: 9638-9085
> > > > > > > E-mail: fabiomirmar at gmail.com
> > > > > > >
> > > > > > > --
> > > > > > > redhat-list mailing list
> > > > > > > unsubscribe
> > > > > mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > > > > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > redhat-list mailing list
> > > > > > > unsubscribe
> > > > > mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > > > > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > > > > >
> > > > > >
> > > > > >
> > > > > > Wesleyan Administration Services Ltd registered number
> > > > > 5188850 and Wesleyan Unit Trust Managers Ltd registered number
> > > > > 2114859 ("WUTM Ltd")
> > > > > > are wholly owned subsidiary companies of Wesleyan Assurance
> > > > > Society, whose registered number is ZC145.
> > > > > > WUTM Ltd is a member of IMA. For ISA/PEP/Unit Trusts
> > > > > Administration Centre: PO Box Basildon SS15 5WQ Telephone:
> > > > > 0870 601 6129
> > > > > > Wesleyan Assurance Society and WUTM Ltd are authorised and
> > > > > regulated by the Financial Services Authority.
> > > > > > Head Office, Colmore Circus, Birmingham B4 6AR. Telephone:
> > > > > 0121 200 3003 Fax 0121 200 2971.
> > > > > > Website: www.wesleyan.co.uk Telephone calls may be recorded
> > > > > for monitoring and training purposes.
> > > > > >
> > > > > > CONFIDENTIALITY NOTICE
> > > > > >
> > > > > > This communication and the information it contains is
> > > > > intended for the person or organisation to whom it is
> > > addressed. Its
> > > > > contents are confidential and may be protected in law.
> > > Unauthorised
> > > > > use, copying or disclosure of any of it may be unlawful.
> > > If you are
> > > > > not the intended recipient, please contact us immediately.
> > > > > >
> > > > > > The contents of any attachments in this e-mail may contain
> > > > > software viruses, which could damage your own computer
> > > system. While
> > > > > every reasonable precaution to minimise this risk has
> > > been taken, we
> > > > > cannot accept liability for any damage that you sustain
> > > as a result
> > > > > of software viruses. You should carry out your own
> > virus checking
> > > > > procedure before opening any attachment.
> > > > > >
> > > > > >
> > > > > > --
> > > > > > redhat-list mailing list
> > > > > > unsubscribe
> > > > > mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > > > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Fábio Augusto Miranda Martins
> > > > > Fone: 6202-3897 / 6987-0590
> > > > > Cel: 9638-9085
> > > > > E-mail: fabiomirmar at gmail.com
> > > > >
> > > > > --
> > > > > redhat-list mailing list
> > > > > unsubscribe
> > > > > mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > > >
> > > >
> > > > --
> > > > redhat-list mailing list
> > > > unsubscribe
> > > mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > >
> > >
> > >
> > > --
> > > Fábio Augusto Miranda Martins
> > > Fone: 6202-3897 / 6987-0590
> > > Cel: 9638-9085
> > > E-mail: fabiomirmar at gmail.com
> > >
> > > --
> > > redhat-list mailing list
> > > unsubscribe
> > mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > > https://www.redhat.com/mailman/listinfo/redhat-list
> > >
> > >
> >
> >
> > --
> > redhat-list mailing list
> > unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > https://www.redhat.com/mailman/listinfo/redhat-list
> >
> >
>
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>


--
Fábio Augusto Miranda Martins
Fone: 6202-3897 / 6987-0590
Cel: 9638-9085
E-mail: fabiomirmar at gmail.com

More information about the redhat-list mailing list