Failure to boot with SMP kernel on x86_64 SMP system ...
Troy Knabe
knabe at 4j.lane.edu
Wed Dec 6 06:08:21 UTC 2006
I had a similar issue. There was a kernel issue with the LSI raid controller, where it would hang on boot. It would literally hang 4-7 times, I would have to hard reset it via the LOM, and finally it would just boot. I am running 2.6.9-42.0.3.ELsmp. When I upgraded the kernel it quit.
-Troy
----- Original Message -----
From: "Sandor W. Sklar" <ssklar at stanford.edu>
Date: Tuesday, December 5, 2006 8:09 pm
Subject: Re: Failure to boot with SMP kernel on x86_64 SMP system ...
To: General Red Hat Linux discussion list <redhat-list at redhat.com>
> no, and that's the weird thing. As far as I know, and as
> far as my
> research went, there were no changes, nor was there really any
> active
> use of the system. That's the first thing I checked, of
> course. Its
> kernel version, and the version of all RPMs currently on the
> system,
> are the same as on the others that I have, and haven't changed
> in weeks.
>
> -s-
>
> On Dec 5, 2006, at 5:47 PM, Meadows, Andrew wrote:
>
> > Anything installed recently.... Hardware or software?
> >
> > -----Original Message-----
> > From: redhat-list-bounces at redhat.com <redhat-list-
> bounces at redhat.com>> To: General Red Hat Linux discussion list
> <redhat-list at redhat.com>
> > Sent: Tue Dec 05 18:43:34 2006
> > Subject: Failure to boot with SMP kernel on x86_64 SMP system ...
> >
> > Hi, Folks ...
> >
> > One of my Sun X4100s was hung this morning. All of them
> are running
> > RHEL 4 update 4. On rebooting with an SMP kernel, it consistently
> > hangs after printing the below to the console:
> >
> > ===========================================================
> >
> > powernow-k8: Found 4 AMD Athlon 64 / Opteron processors (version
> > 1.50.04-rh)
> > powernow-k8: MP systems not supported by PSB BIOS structure
> > powernow-k8: init not cpu 0
> > powernow-k8: init not cpu 0
> > powernow-k8: init not cpu 0
> > ACPI: (supports S0 S1 S4 S5)
> > ACPI wakeup devices:
> > PCI1 USB0 ETHR USB1
> > Unable to handle kernel NULL pointer dereferenceFreeing unused
> kernel> memory: 192k freed
> >
> > ============================================================
> >
> > All of the systems I have are running the same kernel
> > (2.6.9-42.0.2.ELsmp), but I also tried booting it with 2.6.9-
> 34.ELsmp> kernel, with the same exact result.
> >
> > I can boot it fine using the "non-SMP" kernel, but of course,
> I wind
> > up with only one CPU.
> >
> > This kernel isn't new to the system; it has been running fine
> with it
> > for a while. I ran the hardware diagnostic DVD, and it found no
> > hardware problems.
> >
> > So, I'm fishing for ideas here ... anyone got any? Thanks!
> >
> > -s-
> >
> > --
> > redhat-list mailing list
> > unsubscribe mailto:redhat-list-
> request at redhat.com?subject=unsubscribe>
> https://www.redhat.com/mailman/listinfo/redhat-list
> >
> > ********************************************
> > This message is intended only for the use of the Addressee and
> > may contain information that is PRIVILEGED and CONFIDENTIAL.
> >
> > If you are not the intended recipient, you are hereby notified
> > that any dissemination of this communication is strictly prohibited.
> >
> > If you have received this communication in error, please erase
> > all copies of the message and its attachments and notify us
> > immediately.
> >
> > Thank you.
> > ********************************************
> > --
> > redhat-list mailing list
> > unsubscribe mailto:redhat-list-
> request at redhat.com?subject=unsubscribe>
> https://www.redhat.com/mailman/listinfo/redhat-list
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Troy Knabe
Senior Systems Administrator
Computing and Information Services
4J School District
knabe at 4j.lane.edu
Ph: 541.687.3587
Cell: 541.968.0780
More information about the redhat-list
mailing list