Physical Disk Size

Matthijs.Sneijders at corusgroup.com Matthijs.Sneijders at corusgroup.com
Fri Dec 1 10:41:17 UTC 2006


Andrew,

this information is sitting right inside the /var/log/dmesg file.

example:
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low)
-> IRQ 11
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x24a0-0x24a7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x24a8-0x24af, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: WDC WD400BB-60DGA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(100)
hda: cache flushes not supported
 hda: hda1 hda2
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide


Other sample:

ahci(0000:00:1f.2) AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA
mode
ahci(0000:00:1f.2) flags: 64bit ncq pm led clo pio slum part
ata1: SATA max UDMA/133 cmd 0xFFFFFF0000006500 ctl 0x0 bmdma 0x0 irq 233
ata2: SATA max UDMA/133 cmd 0xFFFFFF0000006580 ctl 0x0 bmdma 0x0 irq 233
ata3: SATA max UDMA/133 cmd 0xFFFFFF0000006600 ctl 0x0 bmdma 0x0 irq 233
ata4: SATA max UDMA/133 cmd 0xFFFFFF0000006680 ctl 0x0 bmdma 0x0 irq 233
ata1: dev 0 cfg 49:2f00 82:3069 83:7c01 84:4023 85:3069 86:3401 87:4023
88:203f
ata1: dev 0 ATA, max UDMA/100, 312581808 sectors: lba48
ata1: dev 0 configured for UDMA/100
scsi0 : ahci
ata2: dev 0 cfg 49:2f00 82:706b 83:7c01 84:4023 85:7069 86:bc01 87:4023
88:203f
ata2: dev 0 ATA, max UDMA/100, 312581808 sectors: lba48
ata2: dev 0 configured for UDMA/100
scsi1 : ahci
ata3: no device found (phy stat 00000000)
scsi2 : ahci
ata4: no device found (phy stat 00000000)
scsi3 : ahci
  Vendor: ATA       Model: ST3160812AS       Rev: 3.AH
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
  Vendor: ATA       Model: SAMSUNG HD160JJ/  Rev: ZM10
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write back
 sdb: sdb1
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
                                         
 Matthijs Sneijders                      
                                         


                                                  
    CORUS                                         
    Research,                                     
    Development                                   
    &                                             
    Technology                                    
                                                  
    Building                                      
    3G16 room                                     
    3-312                                         
                                                  
    P.O. Box                                      
    10.000                                        
                                                  
    1970 CA                                       
    IJMUIDEN                                      
                                                  
    phone       +31 (0)251-496400                 
                                                  
    fax         +31 (0)251-470064                 
                                                  
    mail        matthijs.sneijders at corusgroup.com 
                                                  





                                                                                                                                
                      Andrew.Bridgeman at cor                                                                                      
                      usgroup.com                 To:       redhat-list at redhat.com                                              
                      Sent by:                    cc:                                                                           
                      redhat-list-bounces@        Subject:  Physical Disk Size                                                  
                      redhat.com                                                                                                
                                                                                                                                
                                                                                                                                
                      01-12-2006 10:57                                                                                          
                      Please respond to                                                                                         
                      General Red Hat                                                                                           
                      Linux discussion                                                                                          
                      list                                                                                                      
                                                                                                                                
                                                                                                                                






Could someone tell me a command i can run on my Redhat machines to find out
the physical disk size of the hard disk in the machine without having to
take the disk out and look at it , this is because  i have some machines
that are 18/36/72/73 gig and need to know which ones they are. I have run a
fdisk to show the partitions but i am unsure if all of the machines have
been configured to use all of the disk so there must be a command i can run
to just check this out?
Any help would be much appreciated.

Andrew B
**********************************************************************
This transmission is confidential and must not be used or disclosed by
anyone other than the intended recipient. Neither Corus Group Plc nor
any of its subsidiaries can accept any responsibility for any use or
misuse of the transmission by anyone.
**********************************************************************


--
redhat-list mailing list
unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list



**********************************************************************
This transmission is confidential and must not be used or disclosed by
anyone other than the intended recipient. Neither Corus Group Plc nor
any of its subsidiaries can accept any responsibility for any use or
misuse of the transmission by anyone.
**********************************************************************





More information about the redhat-list mailing list