[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: can't send or recive any emails



First of all I want to say that *I know* that the problem is solved but I see the same mistake done over and over again and I hate this. For anyone having problems. You should post *consistent* and *correct* info about your problem. Otherwise your post could sound like this:
"Hello, I have a service that is not working. What is the problem?"

Here is how I interpret your mail:

tamer amr wrote:
when i send an e-mail form yahoo or my mail server i get this error Remote host said: 550 5.0.0 Access denied
what is the problem ?
What mail server said this? Yours or another? From whom did the mail originated and was addressed to whom?
 this is my configurtion for my iptables firewall
I believe that your iptables rules are a bit messed up...
 Chain INPUT (policy ACCEPT)
policy for input chain is ACCEPT all packets
 target     prot opt source               destination
 DROP       all  --  0.0.0.0/0            0.0.0.0/0           state INVALID
 ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0           state NEW
here you accept all packets that do not correspond to any established communication? Why? This includes packets that start a new connection.
 ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED
this should be ok if you'd have DROP policy on the INPUT chain but as you have ACCEPT policy it doesn't make any sense.
 ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp spt:80
 ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp spt:143
 ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp spt:53
 ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp spt:67
 ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp spt:443
All this is useless given the fact that you have ACCEPT policy. All these are already accepted. This config would make sense if you would have DROP policy on INPUT chain and you'd erase the NEW state rule. Then you would have opened only http, imap, domain, 67??? (maybe you moved ssh to this port...) and https. Then you should experience problems on port 25 and as a response you'd "pierce" your firewall with a ACCEPT --dport 25 rule.
 LOG        all  --  0.0.0.0/0            0.0.0.0/0           LOG flags 0 level 4
Chain FORWARD (policy ACCEPT)
 target     prot opt source               destination
 ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
 ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
Useless given the policy on FW chain...
Chain OUTPUT (policy ACCEPT)
 target     prot opt source               destination
 ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:67
same 67 port, I wonder what you use it for...
 ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:80
 ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:53
 ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:443
 ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp spt:80 state RELATED,ESTABLISHED

Also useless for the same reason.

From here I can draw only two conclusions either you sent another iptables config (maybe from another machine) or you should be wide open to incoming traffic. So, having said that I wonder how this is resolved by unblocking something that wasn't blocked in the first place...
My belief is that:
You were trying to solve the problem on your own and modified all policies to accept to see if the firewall was the problem. Then you posted the modified config to the list. The next step was mr Waleed and mr Nilesh not reading the rules correctly and erroneously sending you to the answer to the problem. Well a few of you will say "What's your problem? The guy had it's problem solved!". Well I think that solving the problem by making two incorrect decisions would not benefit to anyone. This list's scope (from my point of view) is not about solving problems but mostly about evolution. I read threads that I find interesting and could teach me new stuff and I think so do others. And from those others a few might have not understood nothing from this thread although it's about basics on firewalling with iptables... So, again: guys, if you have problems post as many info regarding the problem as you have and try not to post incorrect info. Maybe this will be added to the etiquette of this list and it will be reminded to everyone that does not respect it.

Thank you for your patience,
LoG



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]