How do I add a network route permanently using "route add" commandin linux.

unix syzadmin unixsyzadmin at gmail.com
Fri Feb 24 04:34:33 UTC 2006


Hi,

After adding /etc/route-eth0, Please find how the route looks like.  Is this
fine, Please suggest.

[root at bgpcamd1 network-scripts]# ls -l route-eth0
-rw-r--r--  1 root root 24 Feb 24 09:46 route-eth0
[root at bgpcamd1 network-scripts]# more route-eth0
0.0.0.0 via 172.22.40.1
[root at bgpcamd1 network-scripts]# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
0.0.0.0         172.22.40.1     255.255.255.255 UGH   0      0        0 eth0
172.22.40.0     0.0.0.0         255.255.254.0   U     0      0        0 eth0
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 eth0
0.0.0.0         172.22.40.1     0.0.0.0         UG    0      0        0 eth0
[root at bgpcamd1 network-scripts]#

Thanks & Regards,
-GnanaShekar-


On 2/24/06, unix syzadmin <unixsyzadmin at gmail.com> wrote:
>
> Hi,
>
> Find below the contents of /etc/sysconfig/network-scripts/ifcfg-eth0
>
> [root at bgpcamd1 network-scripts]# pwd
> /etc/sysconfig/network-scripts
> [root at bgpcamd1 network-scripts]# more ifcfg-eth0
> DEVICE=eth0
> ONBOOT=yes
> BOOTPROTO=static
> IPADDR=172.22.40.50
> NETMASK=255.255.254.0
> GATEWAY=172.22.40.1
> [root at bgpcamd1 network-scripts]#
>
>
> On 2/24/06, Michael Gale <Michael.Gale at pason.com> wrote:
>
> > Hey,
> >
> > In your /etc/sysconfig/network-scripts directory, create a route file or
> > add to one that is already there.
> >
> > Example
> > route-eth1
> > 'destination' via 'gateway ip'
> >
> > However it looks like you want to add a default gateway ? That should be
> > taken care of by your /etc/sysconfig/network-scripts/ifcfg-eth# file.
> >
> > Michael Gale
> >
> >
> > -----Original Message-----
> > From: redhat-list-bounces at redhat.com on behalf of unix syzadmin
> > Sent: Thu 2/23/2006 8:42 PM
> > To: General Red Hat Linux discussion list
> > Subject: How do I add a network route permanently using "route add"
> > commandin linux.
> >
> > Hi,
> >
> > I have added the following route on a RHEL AS4 server.  How do I make
> > this
> > route a permanent one.  In other words, how do I add a route that
> > persists
> > after reboot.
> >
> > route add -net 0.0.0.0 netmask 0.0.0.0 gw 172.22.40.1 dev eth0
> >
> > Thanks & Regards,
> > -GnanaShekar-
> > --
> > redhat-list mailing list
> > unsubscribe mailto:redhat-list-request at redhat.com?subject=subscribe
> > https://www.redhat.com/mailman/listinfo/redhat-list
> >
> >
> >
> > --
> > redhat-list mailing list
> > unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > https://www.redhat.com/mailman/listinfo/redhat-list
> >
> >
>



More information about the redhat-list mailing list