[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

RE: linux vs SAN



Yes there is. Does it make sense (Probably it does :) somehow) ? Because
I thought that the same should happen for the Host A. 

-----Original Message-----
From: redhat-list-bounces redhat com
[mailto:redhat-list-bounces redhat com] On Behalf Of Tom Callahan
Sent: Wednesday, February 01, 2006 4:56 PM
To: General Red Hat Linux discussion list
Subject: Re: linux vs SAN

Do you have two physical machines that can see these disks? You referred
to HOST B, is there a HOST A, that is presented the same storage as
well?

Thanks,

Tom Callahan
TESSCO Technologies
Desk: (410)-229-1361
Cell: (443)-506-6216
Email: callahant tessco com

A real engineer only resorts to documentation when the keyboard dents on
the forehead get too noticeable.



baran yurdagul turkcell com tr wrote:

>Hi Tom,
>Thank you very much for the detail, it is really quite usefull but in
>our situation there are strange things happening. Just 10 minmutes ago
>when I type fdsik -l from Host B I have seen that 2 disks are active
>because the other disks cannot be read. I have created a partition  on
>sdd (sdd1) and make fs and label it. Afterwards I typed fdisk -l again
>to see the second active disk but I have been suprized that 4 disks
seem
>to be accessiable now.. 
>Isn't it strange ? 
>Ps. :Do you have some documents ?
>
>-----Original Message-----
>From: redhat-list-bounces redhat com
>[mailto:redhat-list-bounces redhat com] On Behalf Of Tom Callahan
>Sent: Wednesday, February 01, 2006 3:46 PM
>To: General Red Hat Linux discussion list
>Subject: Re: linux vs SAN
>
>Welcome to Linux vs. the SAN. It's sometimes a tough road, but it's
>wonderful once it's working.
>
>We currently have several RHEL3 and RHEL4 systems booting and running
>exclusively off our SAN's, with no internal storage. We use Qlogic 2340
>HBA's, 2 in each system for High Availability. Our setups utilize two
>SAN cabinets, with MD software mirroring between the two SANs.
>
>Linux has multiple ways of dealing with the Active/Passive pathing
>issues of seeing 4 disks, when only two are presented. We currently use
>Qlogic's drivers which include "failover" support, this way the driver
>loads and all "passive" devices are not presented to the OS, only the
>actives. The card handles the occurrence of a path failure, and fails
to
>the passive path, without the OS ever knowing (short of some entries in
>/var/log/messages).
>
>Multipathing is another option, but I am unsure of support in RHEL 2.1.
>There are tons of documents around the net on how to setup
multipathing,
>including redhat's own documentation in their knowledgebase.
>
>Behavior you should see in an Active/Passive setup is below:
>1 - You have 2 disks presented from the SAN, one 10Gig and one 20Gig
>2 - Upon boot, you should see /dev/sda as 10Gig, /dev/sdb as 20Gig,
>/dev/sdc as 10Gig, and /dev/sdd as 20Gig (this could be reversed, with
>the 20Gig disk showing up first. it depends on the LUNs you have
>assigned the disks.)
>3 - if you `fdisk -l` each disk, you "should" have two disks come up
>with "unable to read from /dev/sdx", those are the passive disks.
>4 - When you are formatting/partitioning the disks, you will want to
use
>the set of disks (set being /dev/sda,b and /dev/sdc,d) that you have
>determined are on the active controller path.
>5 - Make sure that when you format a disk, you are prepending a Label
>onto the disk(mkfs.ext3 -L/labelyouchose /dev/sdx or e2label /dev/sdx
>"/labelyouchose"), and use that Label for mounting in /etc/fstab
>(LABEL=/labelyouchose   /mountpoint   ext3   defaults   0 0)
>
>Again, without a multipathing or failover mechanism, things get very
>tricky when determining disks to use. I suggest using one of the above
>options, or if multipathing is not available, to upgrade to a newer
>release of RHEL.
>
>Thanks,
>
>Tom Callahan
>TESSCO Technologies
>Desk: (410)-229-1361
>Cell: (443)-506-6216
>Email: callahant tessco com
>
>A real engineer only resorts to documentation when the keyboard dents
on
>the forehead get too noticeable.
>
>
>
>baran yurdagul turkcell com tr wrote:
>
>  
>
>>Hi All,
>>
>>
>>
>>I have connected my linux box to Hitachi SAN with 2 HBA. I have two
>>nodes and I want to use Veritas as cluster sw. When I wanted to make
>>partitioning and create filesystem on the disks I get a bit confused.
>>Because of 2 HBA, I have seen 4 disks (Infact I have two). I have
>>created a partition and make mkfs.ext3 on to it. But after mkfs.ext3
It
>>is strange that partitionin info has been flushed. Did you experience
>>such problem before or  is there any documentation or howto etc ?? 
>>
>>
>>
>>BR,
>>
>>
>>
>>
>>
>>**********************************************************************
*
>>    
>>
>*
>  
>
>>Bu elektronik posta ve onunla iletilen butun dosyalar sadece
>>    
>>
>gondericisi tarafindan almasi amaclanan yetkili gercek ya da tuzel
>kisinin kullanimi icindir.  Eger soz konusu yetkili alici degilseniz bu
>elektronik postanin icerigini aciklamaniz, kopyalamaniz, yonlendirmeniz
>ve kullanmaniz kesinlikle yasaktir ve bu elektronik postayi derhal
>silmeniz gerekmektedir.
>  
>
>>TURKCELL bu mesajin icerdigi bilgilerin dogrulugu veya eksiksiz oldugu
>>    
>>
>konusunda herhangi bir garanti vermemektedir.  Bu nedenle bu bilgilerin
>ne sekilde olursa olsun iceriginden, iletilmesinden, alinmasindan ve
>saklanmasindan sorumlu degildir. Bu mesajdaki gorusler yalnizca
gonderen
>kisiye aittir ve TURKCELLin goruslerini yansitmayabilir
>  
>
>>Bu e-posta bilinen butun bilgisayar viruslerine karsi taranmistir.
>>**********************************************************************
*
>>    
>>
>*
>  
>
>>This e-mail and any files transmitted with it are confidential and
>>    
>>
>intended solely for the use of the individual or entity to whom they
are
>addressed. If you are not the intended recipient you are hereby
notified
>that any dissemination, forwarding, copying or use of any of the
>information is strictly prohibited, and the e-mail should immediately
be
>deleted.
>  
>
>>TURKCELL makes no warranty as to the accuracy or completeness of any
>>    
>>
>information contained in this message and hereby excludes any liability
>of any kind for the information contained therein or for the
information
>transmission, reception, storage or use of such in any way whatsoever.
>The opinions expressed in this message belong to sender alone and may
>not necessarily reflect the opinions of TURKCELL.
>  
>
>>This e-mail has been scanned for all known computer viruses.
>>**********************************************************************
*
>>    
>>
>*
>  
>
>> 
>>
>>    
>>
>
>  
>

-- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request redhat com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list


************************************************************************
Bu elektronik posta ve onunla iletilen butun dosyalar sadece gondericisi tarafindan almasi amaclanan yetkili gercek ya da tuzel kisinin kullanimi icindir.  Eger soz konusu yetkili alici degilseniz bu elektronik postanin icerigini aciklamaniz, kopyalamaniz, yonlendirmeniz ve kullanmaniz kesinlikle yasaktir ve bu elektronik postayi derhal silmeniz gerekmektedir.
TURKCELL bu mesajin icerdigi bilgilerin dogrulugu veya eksiksiz oldugu konusunda herhangi bir garanti vermemektedir.  Bu nedenle bu bilgilerin ne sekilde olursa olsun iceriginden, iletilmesinden, alinmasindan ve saklanmasindan sorumlu degildir. Bu mesajdaki gorusler yalnizca gonderen kisiye aittir ve TURKCELLin goruslerini yansitmayabilir
Bu e-posta bilinen butun bilgisayar viruslerine karsi taranmistir.
************************************************************************
This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient you are hereby notified that any dissemination, forwarding, copying or use of any of the information is strictly prohibited, and the e-mail should immediately be deleted.
TURKCELL makes no warranty as to the accuracy or completeness of any information contained in this message and hereby excludes any liability of any kind for the information contained therein or for the information transmission, reception, storage or use of such in any way whatsoever.  The opinions expressed in this message belong to sender alone and may not necessarily reflect the opinions of TURKCELL.
This e-mail has been scanned for all known computer viruses.
************************************************************************




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]