Adaptec SCSI RAID 2000S

Johan Booysen johan at matrix-data.co.uk
Tue Oct 23 07:50:29 UTC 2007


My controller is an Adaptec SCSI RAID 2000S.  I did try manually
selecting the Aic79xx driver too, but that didn't work at all - was a
bit of a desperate attempt, but hey...

I've logged a support case with Red Hat, so will see if they can maybe
help.

Recompiling kernels...well, I'll have to look into that.  That's way
outside of my current knowledge/experience :)

I see what you mean:  It does appear as if the driver is present, but
something is amiss somewhere.

Thanks very much for your advice.

Johan

-----Original Message-----
From: redhat-list-bounces at redhat.com
[mailto:redhat-list-bounces at redhat.com] On Behalf Of Geofrey Rainey
Sent: 22 October 2007 22:08
To: General Red Hat Linux discussion list; sorin.srbu at orgfarm.uu.se
Subject: RE: Adaptec SCSI RAID 2000S

Hello,

I recently had a similar problem installing RHEL5.0 on a box with an
Adaptec 7901x controller.

To resolve I had to select "linux noprobe" during the install and
explicitly select the required Drivers. In my case I needed the
following drivers to get the kernel to recognize the scsi device:

I2o_block
Aic79xx (because my controller was a 7901x)  

And also the tg3 (network driver, but didn't work, see below)

After this the kernel could see the scsi driver and enabled me to
install onto the scsi device.
However the same problem then emerged with the network driver and I
couldn't seem to resolve This by explicitly specifying the tg3 driver
during install, so I installed RHEL5 anyway minus network.
To resolve this I downloaded the latest kernel source from kernel.org
and recompiled it enabling both the Requisite drivers for the network
card and the scsi device by compiling the drivers into the kernel Itself
- as opposed to LKM's.

So to summarise, the linux noprobe method allowed me to install the
RHEL5 operating system onto
The scsi device by explicitly selecting the requisite scsi drivers (but
without network), and a kernel recompile of a generic kernel was
necessary to get the network drivers to install as well as the scsi
drivers.

This was as interesting problem that despite logging a job with Redhat,
the problem was unable to be Resolved using the Redhat kernel even
though I also unpacked the initrd image and verified that All the
drivers I needed were indeed contained in the image.

Let me know how you get on, and if you need more help with anything
above.

Regards,
Geofrey Rainey.


-----Original Message-----
From: redhat-list-bounces at redhat.com
[mailto:redhat-list-bounces at redhat.com] On Behalf Of Johan Booysen
Sent: Monday, 22 October 2007 9:09 p.m.
To: sorin.srbu at orgfarm.uu.se; General Red Hat Linux discussion list
Subject: RE: Adaptec SCSI RAID 2000S

I don't think management over here will go for CentOS.  Besides, if
CentOS is the same as Red Hat, I assume that it too will not have the
driver I need..?

Thanks for the suggestion, though!

Johan 

-----Original Message-----
From: redhat-list-bounces at redhat.com
[mailto:redhat-list-bounces at redhat.com] On Behalf Of Sorin Srbu
Sent: 22 October 2007 07:51
To: 'General Red Hat Linux discussion list'
Subject: RE: Adaptec SCSI RAID 2000S

Johan Booysen <> scribbled on Friday, October 19, 2007 6:28 PM:

You should do fine with CentOS5 as a replacement for RHEL5. CentOS is
binary compatible, a clone if you want, of RHEL. Only real difference
(and the one I can care slightly about) is that CentOS has had all the
RHEL-logos etc stripped and that it uses yum for updating instead of
RHEL's up2date and the RHN.

I use CentOS myself for trying out stuff before deploying to our RHEL3/4
machines. So far so good. I also like the fact that CentOS is supported
as long as RHEL is. Redhat will support v5 until 2011?), and since
CentOS is basically the same thing as RHEL, the same will be true for
support and updates for CentOS.

See this thread on the CentOS forums, it might help you decide:
http://www.centos.org/modules/newbb/viewtopic.php?topic_id=3107&forum=35
. 8-)

[off-track]
I used Fedora before to try out stuff before, but thought the fast
update-cycle was a bit too bleeding edge. I searched around a while and
came across CentOS and haven't looked back since.
[on-track]

HTH.



> Matt,
> 
> Good question, and a very valid point.  But anyway, this box is kind 
> of a test-lab Oracle server, and needs to be RHEL5 for that purpose.
> I believe it will be pretty heavily used, so virtualizing it won't 
> happen
> - I'll bet my last penny on that, and on the Springboks, by the way!  
> :)
> 
> 
> I think the next thing to do is to perhaps flash the Adaptec adapter's

> BIOS to a newer version, and then see if the driver will load...I'm 
> pretty certain that I've exhausted all other options for now.
> 
> Will see what the boss says on Monday...
> 
> Thanks very much for your reply.
> 
> Johan
> 
> -----Original Message-----
> From: redhat-list-bounces at redhat.com
> [mailto:redhat-list-bounces at redhat.com] On Behalf Of Matt
> Sent: 19 October 2007 17:18
> To: 'General Red Hat Linux discussion list'
> Subject: RE: Adaptec SCSI RAID 2000S
> 
> Perhaps this is not the answer you are looking for, but maybe you can 
> install another distro (Fedora or an older CENTOS) to get driver 
> support.
> Also, could using a virtual server work?  I am just wondering if you 
> can place something like CENT as the host OS then run VMWare and maybe

> create a virtual machine with RHEL5?  Perhaps this VM will not require

> direct hardware support for the controller?  You might be able to 
> virtualize part of your infrastructure as well and run a legacy OS 
> which supports your controller - then, include this box in the virtual

> infrastructure.
> 
> Maybe the real question is why is it that you need to run RHEL5 on a 4

> year old box?  I am not saying there is a problem with it, but is it 
> essential that REHL5 is run on this one?
> 
> Just some thoughts for you...
> 
> -----Original Message-----
> From: redhat-list-bounces at redhat.com
> [mailto:redhat-list-bounces at redhat.com]
> On Behalf Of Andrew Bacchi
> Sent: Friday, October 19, 2007 11:41 AM
> To: General Red Hat Linux discussion list
> Subject: Re: Adaptec SCSI RAID 2000S
> 
> I hope you've already solved this problem.  Have you checked the 
> Adaptec web site for a Linux driver?  If anyone has one, it would be
the OEM.
> 
> 
> Johan Booysen wrote:
>> I urgently need advice on this:  I need to install RHEL5 on a server 
>> that is probably about 4 years old.  It contains an Adaptec SCSI RAID

>> 2000S adapter, and there is no driver available that I can track down

>> on short notice (and none included on the RHEL5 discs).  Anaconda 
>> does not detect any disks on the server during installation.
>> 
>> Anyone know what my best bet is to get around this, or where to find 
>> a driver that will work?
>> 
>> Thanks very much.
>> 
>> Johan
> 
> --
> 
> veritatis simplex oratio est
> 		-Seneca
> 
> Andrew Bacchi
> Systems Programmer
> Rensselaer Polytechnic Institute
> phone: 518.276.6415  fax: 518.276.2809
> 
> http://www.rpi.edu/~bacchi/
> 
> --
> 
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
> 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.488 / Virus Database: 269.15.0/1077 - Release Date:
> 10/18/2007
> 9:54 AM
> 
> 
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.488 / Virus Database: 269.15.0/1077 - Release Date:
> 10/18/2007
> 9:54 AM
> 
> 
> --
> 
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list


-- 

redhat-list mailing list
unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list

--

redhat-list mailing list
unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
==========================================================
For more information on the Television New Zealand Group, visit us
online at tvnz.co.nz
==========================================================
CAUTION:  This e-mail and any attachment(s) contain information that is
intended to be read only by the named recipient(s).  This information is
not to be used or stored by any other person and/or organisation.

-- 

redhat-list mailing list
unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list




More information about the redhat-list mailing list