Adding new disk to volume group
Kory Wheatley
wheakory at isu.edu
Wed Sep 26 21:47:44 UTC 2007
fdisk -l
Disk /dev/cciss/c0d0: 36.4 GB, 36414750720 bytes
255 heads, 32 sectors/track, 8716 cylinders
Units = cylinders of 8160 * 512 = 4177920 bytes
Device Boot Start End Blocks Id System
/dev/cciss/c0d0p1 1 2 8144 4 FAT16 <32M
/dev/cciss/c0d0p2 * 3 52 204000 83 Linux
/dev/cciss/c0d0p4 285 8716 34402560 f W95
Ext'd (LBA)
/dev/cciss/c0d0p5 285 8064 31742384 8e Linux LVM
/dev/cciss/c0d0p6 8065 8578 2097104 82 Linux swap
Disk /dev/cciss/c0d1: 36.4 GB, 36414750720 bytes
255 heads, 32 sectors/track, 8716 cylinders
Units = cylinders of 8160 * 512 = 4177920 bytes
Disk /dev/cciss/c0d1 doesn't contain a valid partition table
[root at lx6 cciss]# vgdisplay -v
Finding all volume groups
Finding volume group "VolGroup00"
Fixing up missing format1 size (30.27 GB) for PV /dev/cciss/c0d0p5
--- Volume group ---
VG Name VolGroup00
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 7
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 5
Open LV 5
Max PV 0
Cur PV 1
Act PV 1
VG Size 30.25 GB
PE Size 32.00 MB
Total PE 968
Alloc PE / Size 870 / 27.19 GB
Free PE / Size 98 / 3.06 GB
VG UUID psKZl5-5omn-3pqG-S6Ip-i4wR-9OGc-7LSmbP
--- Logical volume ---
LV Name /dev/VolGroup00/LogVol00
VG Name VolGroup00
LV UUID Sng7Z5-PTPx-snkr-nAzW-PkKz-LkUt-7TZTaS
LV Write Access read/write
LV Status available
# open 1
LV Size 4.00 GB
Current LE 128
Segments 1
Allocation inherit
Read ahead sectors 0
Block device 253:0
--- Logical volume ---
LV Name /dev/VolGroup00/LogVol01
VG Name VolGroup00
LV UUID nDG0HT-xL9G-xD9D-emyJ-g4mf-huCj-SOvgnz
LV Write Access read/write
LV Status available
# open 1
LV Size 5.00 GB
Current LE 160
Segments 2
Allocation inherit
Read ahead sectors 0
Block device 253:1
--- Logical volume ---
LV Name /dev/VolGroup00/LogVol02
VG Name VolGroup00
LV UUID P9cXHo-BttJ-IHgo-b8Vw-xPjM-ncxA-Vjcv08
LV Write Access read/write
LV Status available
# open 1
LV Size 1.00 GB
Current LE 32
Segments 1
Allocation inherit
Read ahead sectors 0
Block device 253:2
--- Logical volume ---
LV Name /dev/VolGroup00/LogVol03
VG Name VolGroup00
LV UUID lDHKwJ-Y0Lf-3SR4-NoNr-ZjN2-cH4O-B8718x
LV Write Access read/write
LV Status available
# open 1
LV Size 4.00 GB
Current LE 128
Segments 1
Allocation inherit
Read ahead sectors 0
Block device 253:3
--- Logical volume ---
LV Name /dev/VolGroup00/LogVol04
VG Name VolGroup00
LV UUID jS7ech-ru2u-08JG-ulZp-sPbr-lfSV-2FsCCO
LV Write Access read/write
LV Status available
# open 1
LV Size 13.19 GB
Current LE 422
Segments 1
Allocation inherit
Read ahead sectors 0
Block device 253:4
--- Physical volumes ---
PV Name /dev/cciss/c0d0p5
PV UUID NTkXuW-R4CJ-HqxT-WYAp-hOjb-8YTB-1Fj0vL
PV Status allocatable
Total PE / Free PE 968 / 98
One volume group was only setup "VolGroup00"
Geofrey Rainey wrote:
> Hello,
>
> Firstly, please answer these two questions:
>
> 1. what do you see with this command:
>
> # fdisk -l
>
> 2. How many volume groups do you have? (you can find this information
> With the following command. The -v flag will give more verbose output
> including the logical volumes associated with each volume group):
>
> # vgdisplay -v
>
> Regards,
> Geofrey Rainey
>
> -----Original Message-----
> From: redhat-list-bounces at redhat.com
> [mailto:redhat-list-bounces at redhat.com] On Behalf Of Kory Wheatley
> Sent: Thursday, 27 September 2007 8:51 a.m.
> To: General Red Hat Linux discussion list
> Subject: Adding new disk to volume group
>
> Currently I'm using Red Hat Enterprise 4 that has two disk on a Hardware
> Raid 1 (Smart Array 5i controller) that is setup in a Volume Group
> (VolGroup00) with the following logical volumes LogVol00, LogVol01,
> LogVol02, LogVol03, LogVol04, and LogVol05. I recently added two more
>
> disks in our system/server (these are internal disks on a HP Proliant
> DL380 g2) and set these disk as a Hardware Raid 1. Now I haven't used
> Fdisk or nothing on these new disks.
>
> Here's my question: How do I add the new disks to the already existing
> Volume Group so that I can have more space on the Volume Group. Being a
> Raid1 I know your only adding one disk. Could someone send me the exact
> commands to use?
> ==========================================================
> For more information on the Television New Zealand Group, visit us
> online at tvnz.co.nz
> ==========================================================
> CAUTION: This e-mail and any attachment(s) contain information that
> is intended to be read only by the named recipient(s). This information
> is not to be used or stored by any other person and/or organisation.
>
More information about the redhat-list
mailing list