mount Linux directory on Windows
Krishnaprasad_K at Dell.com
Krishnaprasad_K at Dell.com
Tue Feb 26 05:57:04 UTC 2008
Mention the share name and properties /etc/samba/smb.conf and restart
smb service.
Then u need to create a samba user using useradd command and add it into
the samba database by using smbpasswd -a <user name>
Then if you try to access the same from windows/linux, it will ask for
the username and password of samba share. Let me know if you face any
difficulty in setting up samba in linux
Thanks,
Krishnaprasad
-----Original Message-----
From: redhat-list-bounces at redhat.com
[mailto:redhat-list-bounces at redhat.com] On Behalf Of Vivek Mangal
Sent: Tuesday, February 26, 2008 9:46 AM
To: Red Hat
Subject: Re: mount Linux directory on Windows
I already try this command but nothing happen
and its for mounting Windows directory on Linux using Windows Samba
Server.
I want mount linux directory using Linux Samba Server on Windows Client.
So, Tell me what i do for this ?
From: krishnaakishore at gmail.com
Subject: Re: mount Linux directory on Windows
To: "General Red Hat Linux discussion list" <redhat-list at redhat.com>
Message-ID:
<eab29e90802250341x361a10d6gd209fe73fcba804c at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
You can use "mount -t cifs ..." for windows/samba shares on linux.
KK
On 2/25/08, Vivek Mangal <vivek.mangal9685 at gmail.com> wrote:
>
> Hello All,
>
> I want to mount Linux Directory on Windows PCs.
> For mounting i used Samba Server.
> command
> # smbclient -L <192.168.x.x>
> is working properly on linux PCs.
>
> But i am not able to mount Linux Directory on Window PC.
>
> i tried \\192.168.x.x from windows, but their is a error
> which is "Network path was not found".
> but i successfully ping to 192.168.x.x system.
>
> and i tried # smbmount smbfs -o username-admin//192.168.x.x/<share
name>
> <mount point>
> again their is error which is "command smbmount not found".
>
> now tell me what is my mistake ?
> The ip of windows PC is 192.168.2.x and linux PC is 192.168.1.x
> for details /etc/samba/smb.conf file is
> -----------------
> # This is the main Samba configuration file. You should read the
> # smb.conf(5) manual page in order to understand the options listed
> # here. Samba has a huge number of configurable options (perhaps too
> # many!) most of which are not shown in this example
> #
> # Any line which starts with a ; (semi-colon) or a # (hash)
> # is a comment and is ignored. In this example we will use a #
> # for commentry and a ; for parts of the config file that you
> # may wish to enable
> #
> # NOTE: Whenever you modify this file you should run the command
> "testparm"
> # to check that you have not made any basic syntactic errors.
> #
> #======================= Global Settings
> =====================================
> [global]
>
> # workgroup = NT-Domain-Name or Workgroup-Name
> workgroup = WORK
>
> # server string is the equivalent of the NT Description field
> server string = Samba Server
>
> # This option is important for security. It allows you to restrict
> # connections to machines which are on your local network. The
> # following example restricts access to two C class networks and
> # the "loopback" interface. For more examples of the syntax see
> # the smb.conf man page
> hosts allow = 192.168.1. 192.168.2.
>
> # if you want to automatically load your printer list rather
> # than setting them up individually then you'll need this
> printcap name = /etc/printcap
> load printers = no
>
> # It should not be necessary to spell out the print system type unless
> # yours is non-standard. Currently supported print systems include:
> # bsd, sysv, plp, lprng, aix, hpux, qnx
> ; printing = cups
>
> # This option tells cups that the data has already been rasterized
> cups options = raw
>
> # Uncomment this if you want a guest account, you must add this to
> /etc/passwd
> # otherwise the user "nobody" is used
> ; guest account = pcguest
>
> # this tells Samba to use a separate log file for each machine
> # that connects
> log file = /var/log/samba/%m.log
> # all log information in one file
> # log file = /var/log/samba/smbd.log
>
> # Put a capping on the size of the log files (in Kb).
> max log size = 50
>
> # Security mode. Most people will want user level security. See
> # security_level.txt for details.
> security = user
> # Use password server option only with security = server
> ; password server = <NT-Server-Name>
>
> # Password Level allows matching of _n_ characters of the password for
> # all combinations of upper and lower case.
> ; password level = 8
> ; username level = 8
>
> # You may wish to use password encryption. Please read
> # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
> # Do not enable this option unless you have read those documents
> ; encrypt passwords = yes
> smb passwd file = /etc/samba/smbpasswd
>
> # The following are needed to allow password changing from Windows to
> # update the Linux system password also.
> # NOTE: Use these with 'encrypt passwords' and 'smb passwd file'
above.
> # NOTE2: You do NOT need these to allow workstations to change only
> # the encrypted SMB passwords. They allow the Unix password
> # to be kept in sync with the SMB password.
> ; unix password sync = Yes
> ; passwd program = /usr/bin/passwd %u
> ; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password*
%n\n
> *passwd:*all*authentication*tokens*updated*successfully*
>
> # Unix users can map to different SMB User names
> username map = /etc/samba/smbusers
>
> # Using the following line enables you to customise your configuration
> # on a per machine basis. The %m gets replaced with the netbios name
> # of the machine that is connecting
> ; include = /etc/samba/smb.conf.%m
>
> # Most people will find that this option gives better performance.
> # See speed.txt and the manual pages for details
> socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
>
> # Configure Samba to use multiple interfaces
> # If you have multiple network interfaces then you must list them
> # here. See the man page for details.
> interfaces = 192.168.1.0/24 192.168.2.0/24
>
> # Configure remote browse list synchronisation here
> # request announcement to, or browse list sync from:
> # a specific host or from / to a whole subnet (see below)
> ; remote browse sync = 192.168.3.25 192.168.5.255
> # Cause this host to announce itself to local subnets here
> ; remote announce = 192.168.1.255 192.168.2.44
>
> # Browser Control Options:
> # set local master to no if you don't want Samba to become a master
> # browser on your network. Otherwise the normal election rules apply
> ; local master = no
>
> # OS Level determines the precedence of this server in master browser
> # elections. The default value should be reasonable
> ; os level = 33
>
> # Domain Master specifies Samba to be the Domain Master Browser. This
> # allows Samba to collate browse lists between subnets. Don't use this
> # if you already have a Windows NT domain controller doing this job
> ; domain master = yes
>
> # Preferred Master causes Samba to force a local browser election on
> startup
> # and gives it a slightly higher chance of winning the election
> ; preferred master = yes
>
> # Enable this if you want Samba to be a domain logon server for
> # Windows95 workstations.
> ; domain logons = yes
>
> # if you enable domain logons then you may want a per-machine or
> # per user logon script
> # run a specific logon batch file per workstation (machine)
> ; logon script = %m.bat
> # run a specific logon batch file per username
> ; logon script = %U.bat
>
> # Where to store roving profiles (only for Win95 and WinNT)
> # %L substitutes for this servers netbios name, %U is username
> # You must uncomment the [Profiles] share below
> ; logon path = \\%L\Profiles\%U
>
> # All NetBIOS names must be resolved to IP Addresses
> # 'Name Resolve Order' allows the named resolution mechanism to be
> specified
> # the default order is "host lmhosts wins bcast". "host" means use the
> unix
> # system gethostbyname() function call that will use either /etc/hosts
OR
> # DNS or NIS depending on the settings of /etc/host.config,
> /etc/nsswitch.conf
> # and the /etc/resolv.conf file. "host" therefore is system
configuration
> # dependant. This parameter is most often of use to prevent DNS
lookups
> # in order to resolve NetBIOS names to IP Addresses. Use with care!
> # The example below excludes use of name resolution for machines that
are
> NOT
> # on the local network segment
> # - OR - are not deliberately to be known via lmhosts or via WINS.
> ; name resolve order = wins lmhosts bcast
>
> # Windows Internet Name Serving Support Section:
> # WINS Support - Tells the NMBD component of Samba to enable it's WINS
> Server
> ; wins support = yes
>
> # WINS Server - Tells the NMBD components of Samba to be a WINS Client
> # Note: Samba can be either a WINS Server, or a WINS Client, but
NOT
> both
> ; wins server = w.x.y.z
>
> # WINS Proxy - Tells Samba to answer name resolution queries on
> # behalf of a non WINS capable client, for this to work there must be
> # at least one WINS Server on the network. The default is NO.
> ; wins proxy = yes
>
> # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS
names
> # via DNS nslookups. The built-in default for versions 1.9.17 is yes,
> # this has been changed in version 1.9.18 to no.
> dns proxy = yes
>
> # Case Preservation can be handy - system default is _no_
> # NOTE: These can be set on a per share basis
> ; preserve case = no
> ; short preserve case = no
> # Default case is normally upper case for all DOS files
> ; default case = lower
> # Be very careful with case sensitivity - it can break things!
> ; case sensitive = no
>
> #============================ Share Definitions
> ==============================
> idmap uid = 16777216-33554431
> idmap gid = 16777216-33554431
> template shell = /bin/false
> winbind use default domain = no
> #[homes]
> # comment = Home Directories
> # browseable = no
> # writable = yes
>
> # Un-comment the following and create the netlogon directory for
Domain
> Logons
> ; [netlogon]
> ; comment = Network Logon Service
> ; path = /home/netlogon
> ; guest ok = yes
> ; writable = no
> ; share modes = no
>
>
> # Un-comment the following to provide a specific roving profile share
> # the default is to use the user's home directory
> ;[Profiles]
> ; path = /home/profiles
> ; browseable = no
> ; guest ok = yes
>
>
> # NOTE: If you have a BSD-style print system there is no need to
> # specifically define each individual printer
> #[printers]
> # comment = All Printers
> # path = /var/spool/samba
> # browseable = no
> # Set public = yes to allow user 'guest account' to print
> # guest ok = no
> # writable = no
> # printable = yes
>
> # This one is useful for people to share files
> ;[tmp]
> ; comment = Temporary file space
> ; path = /tmp
> ; read only = no
> ; public = yes
>
> # A publicly accessible directory, but read only, except for people in
> # the "staff" group
> ;[public]
> ; comment = Public Stuff
> ; path = /home/samba
> ; public = yes
> ; read only = yes
> ; write list = @staff
>
> # Other examples.
> #
> # A private printer, usable only by fred. Spool data will be placed in
> fred's
> # home directory. Note that fred must have write access to the spool
> directory,
> # wherever it is.
> ;[fredsprn]
> ; comment = Fred's Printer
> ; valid users = fred
> ; path = /homes/fred
> ; printer = freds_printer
> ; public = no
> ; writable = no
> ; printable = yes
>
> # A private directory, usable only by fred. Note that fred requires
write
> # access to the directory.
> ;[fredsdir]
> ; comment = Fred's Service
> ; path = /usr/somewhere/private
> ; valid users = fred
> ; public = no
> ; writable = yes
> ; printable = no
>
> # a service which has a different directory for each machine that
connects
> # this allows you to tailor configurations to incoming machines. You
could
> # also use the %u option to tailor it by user name.
> # The %m gets replaced with the machine name that is connecting.
> ;[pchome]
> ; comment = PC Directories
> ; path = /usr/pc/%m
> ; public = no
> ; writable = yes
>
> # A publicly accessible directory, read/write to all users. Note that
all
> files
> # created in the directory by users will be owned by the default user,
so
> # any user with access can delete any other user's files. Obviously
this
> # directory must be writable by the default user. Another user could
of
> course
> # be specified, in which case all files would be owned by that user
> instead.
> ;[public]
> ; path = /usr/somewhere/else/public
> ; public = yes
> ; only guest = yes
> ; writable = yes
> ; printable = no
>
> # The following two entries demonstrate how to share a directory so
that
> two
> # users can place files there that will be owned by the specific
users. In
> this
> # setup, the directory should be writable by both users and should
have
> the
> # sticky bit set on it to prevent abuse. Obviously this could be
extended
> to
> # as many users as required.
> ;[myshare]
> ; comment = Mary's and Fred's stuff
> ; path = /usr/somewhere/shared
> ; valid users = mary fred
> ; public = no
> ; writable = yes
> ; printable = no
> ; create mask = 0765
>
> # By Mangal
> [mangal]
> comment = only for try Samba Server
> path = /var/www/html/
> valid users = mangal
> public = yes
> writable = no
> printable = no
> browseable = yes
> guest ok = yes
> ; create mask = 0765
> ------------------
>
>
>
>
>
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
More information about the redhat-list
mailing list