Hardware RAID break
Pankaj Batra
pankajbatra.c1191 at sysnetglobal.net
Thu May 8 06:14:10 UTC 2008
Hi
I guess you have to clearify the problem.
Rest i guess you must b using RAID 0 and you are saying that you want to
change only one DISK ?
So is you idea is to have one 80 GB and one 300GB ??
And there is no problem in disabling RAID.
Just Degrade it.
ADD new DISK(s) and install RHeL again(take backup before) without
configuring RAID and it will take WHOLe DISK at time of partitioning.
Pankaj Batra.
Sys.Admin.
hi,
>
> I have DELL Power edge 860 server with RHEL AS 4, in that server I have
> hardware RAID configuration with two 80GB SAS hard disk drive, Now I want
> to remove the RAID option and want to add 300 GB SAS hard disk drive
> instated of one 80 GB hard disk drive.
> My problem is how to remove(disable) the hardware RAID ?
>
> Thanks in advance
>
> Regards,
> Sakthi
>
----- Original Message -----
From: <redhat-list-request at redhat.com>
To: <redhat-list at redhat.com>
Sent: Wednesday, May 07, 2008 9:30 PM
Subject: redhat-list Digest, Vol 51, Issue 8
> Send redhat-list mailing list submissions to
> redhat-list at redhat.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://www.redhat.com/mailman/listinfo/redhat-list
> or, via email, send a message with subject or body 'help' to
> redhat-list-request at redhat.com
>
> You can reach the person managing the list at
> redhat-list-owner at redhat.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of redhat-list digest..."
>
>
> Today's Topics:
>
> 1. Re: Problem with X server (Nigel Wade)
> 2. warnquota.conf, ldap, and errors that make basically no sense
> to me.... (Pat Riehecky)
> 3. RE: Problem with X server (Wiedemann, Shane CIV NAVAIR)
> 4. Re: Problem with X server (obed)
> 5. RE: Problem with X server (Wiedemann, Shane CIV NAVAIR)
> 6. RE: Problem with X server (truc nguyen)
> 7. Hardware RAID break (Sakthivel)
> 8. Re: Hardware RAID break (Pat Riehecky)
> 9. Re: Hardware RAID break (Sakthivel)
> 10. Re: Proxy (Joy Methew)
> 11. http request (Koray Sonmez [Oytek])
> 12. lm_sensors on RHEL5 not working! (Nirmal Pathak)
> 13. Re: http request (Paul Malinowski)
> 14. Re: CUPS scheduler dies when adding smb-shared Windows
> printer (Marcos Aurelio Rodrigues)
> 15. Re: CUPS scheduler dies when adding smb-shared Windows
> printer (Marcos Aurelio Rodrigues)
> 16. Shell hangs when using "screen" and "emacs" (Kenneth Holter)
> 17. RE: Shell hangs when using "screen" and "emacs"
> (Gerrard Geldenhuis)
> 18. RE: Shell hangs when using "screen" and "emacs"
> (presgas at gmail.com)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 06 May 2008 17:09:23 +0100
> From: Nigel Wade <nmw at ion.le.ac.uk>
> Subject: Re: Problem with X server
> To: General Red Hat Linux discussion list <redhat-list at redhat.com>
> Message-ID: <482082B3.7010602 at ion.le.ac.uk>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Wiedemann, Shane CIV NAVAIR wrote:
>> So this problem is most likely user error; none the less...
>> I have some software (only one other place has this software) that to
>> view video windows that the software tries to pop up, you need to use
>> the following command to get it to display:
>> "software_name -display hostname", or at least that is what I am told.
>> I have inserted my hostname where it says "hostname" and verified with
>> "uname" that my hostname is correct. I am not connecting to a remote
>> machine, am not on a network and am running the software on a
>> stand-alone machine. The vendors of the software do connect remotely, I
>> believe, and they can pop video display windows just fine. Whenever I
>> run the software, I get a message that says "Unable to connect to x
>> server".
>> I currently have the DISPLAY variable set to ":0.0" and this seems to be
>> fine for opening programs, such as NEdit. Any other setting (even
>> "hostname:0.0") and I cannot start programs such as editors and other
>> programs that open in a separate window. I get errors that say "can't
>> open display" and the like.
>>
>> When I run the software, if I leave out the command "-display hostname"
>> all video rendering is done behind the scenes, i.e., I can't view it. I
>> have tried replacing "hostname" with all of the following:
>> hostname:0.0
>> :0.0
>> hostname:0
>> localhost
>> localhost:0.0
>> localhost:0
>>
>> Any clues?
>
> I think you probably need to enable your X display to listen on the
> network.
>
> The software you are using is pretty strange. It should not be necessary
> to specify the -display option, it should use whatever DISPLAY is set
> to. However, given that it does what it does, you are pretty much at its
> mercy.
>
> By default the X display does not listen for network (TCP) connections,
> it allows local connections using a UNIX domain socket. If you have
> DISPLAY set to :0 clients will connect on the UNIX socket, but if you
> specify a hostname (even localhost) then the connection will be done on
> a TCP socket. If the X server isn't listening on a TCP socket then the
> connection will fail. This is a quite sensible security precaution (it
> prevents any non-local clients connecting to your display, even if you
> use the xhost + security disabler) but can cause problems for any
> software which expects to be able to connect via a TCP socket.
>
> To enable the TCP socket you need to modify the X server startup. How
> you do that depends on what version of RedHat you are using. For RH 4 it
> is set in /etc/X11/gdm/gdm.conf. To enable TCP connections you need to
> change the line:
> DisallowTCP=true
> to
> DisallowTCP=false
>
> In KDE desktop you can also set this using the System Settings->Login
> Screen dialog (I presume there's something similar for Gnome). In the
> Security tab un-check the box marked "Always disallow TCP connections to
> X server".
>
>
> --
> Nigel Wade, System Administrator, Space Plasma Physics Group,
> University of Leicester, Leicester, LE1 7RH, UK
> E-mail : nmw at ion.le.ac.uk
> Phone : +44 (0)116 2523548, Fax : +44 (0)116 2523555
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 06 May 2008 11:38:42 -0500
> From: Pat Riehecky <prieheck at iwu.edu>
> Subject: warnquota.conf, ldap, and errors that make basically no sense
> to me....
> To: redhat-list at redhat.com
> Message-ID: <1210091922.6477.53.camel at thales.iwu.edu>
> Content-Type: text/plain
>
> I am trying to configure up warnquota to use my ldap server to pull
> email addresses for my users. Unfortunately it is not going so
> well......
>
>
> # warnquota
> warnquota: Error in config file (line 23), ignoring
> warnquota: Error in config file (line 24), ignoring
> warnquota: Error in config file (line 27), ignoring
> warnquota: Error in config file (line 28), ignoring
> warnquota: Error in config file (line 29), ignoring
> warnquota: Error in config file (line 30), ignoring
>
>
> The line numbers correspond to almost all the LDAP entries in my
> warnquota.conf file. The only one it doesn't seem to have a problem with
> is LDAP_MAIL = true.
>
> Does anyone have any ideas as to what I have done wrong?
> RHEL5.1 x86_64
> Pat
>
>
>
>
> # cat /etc/warnquota.conf
> MAIL_CMD = "/usr/sbin/sendmail -t"
> FROM = nouser at iwu.edu
> SUBJECT = NOTE: You are exceeding your allocated disk space limits
> SUPPORT = "nouser at iwu.edu"
> PHONE = "555-XXXX"
> SIGNATURE = "Your Admins"
> CC_TO = ''
>
> MESSAGE = "this is a test message i will change later"
>
>
>
> # If you are using LDAP mail lookups.
> # host, port, tls, binddn, and bindpw are straight forward.
> # LDAP_BASEDN is your search base dn
> # LDAP_SEARCH_ATTRIBUTE is the attr for the value you are looking for
> # LDAP_MAIL_ATTRIBUTE is the attribute you want used for the mail
> address
> # LDAP_DEFAULT_MAIL_DOMAIN is the default domain
> # if the attribute isn't found
> # if binddn and bindpw are blank or left out, an anonymous bind is used
> #
> LDAP_MAIL = true
> LDAP_HOST = testldap.iwu.edu
> LDAP_PORT = 389
> # LDAP_BINDDN = uid=ReadOnlyUser,o=YourOrg
> # LDAP_BINDPW = YourReadOnlyUserPassword
> LDAP_BASEDN = dc=iwu,dc=edu
> LDAP_SEARCH_ATTRIBUTE = uid
> LDAP_MAIL_ATTRIBUTE = mail
> LDAP_DEFAULT_MAIL_DOMAIN = iwu.edu
> #
> # end of warnquota.conf file
> #
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 6 May 2008 10:18:13 -0700
> From: "Wiedemann, Shane CIV NAVAIR" <shane.wiedemann at navy.mil>
> Subject: RE: Problem with X server
> To: "General Red Hat Linux discussion list" <redhat-list at redhat.com>
> Message-ID:
> <092382FFE5FB5A48959B9E031C8BF92768A685 at nawechlkez01.nadsuswe.nads.navy.mil>
>
> Content-Type: text/plain; charset="us-ascii"
>
> Success!! You solved my problem! Thank you for taking time to
> respond...much appreciated.
> Cheers,
> Shane Wiedemann
>
> -----Original Message-----
> From: redhat-list-bounces at redhat.com
> [mailto:redhat-list-bounces at redhat.com] On Behalf Of Nigel Wade
> Sent: Tuesday, May 06, 2008 9:09
> To: General Red Hat Linux discussion list
> Subject: Re: Problem with X server
>
> Wiedemann, Shane CIV NAVAIR wrote:
>> So this problem is most likely user error; none the less...
>> I have some software (only one other place has this software) that to
>> view video windows that the software tries to pop up, you need to use
>> the following command to get it to display:
>> "software_name -display hostname", or at least that is what I am told.
>> I have inserted my hostname where it says "hostname" and verified with
>
>> "uname" that my hostname is correct. I am not connecting to a remote
>> machine, am not on a network and am running the software on a
>> stand-alone machine. The vendors of the software do connect remotely,
>
>> I believe, and they can pop video display windows just fine. Whenever
>
>> I run the software, I get a message that says "Unable to connect to x
>> server".
>> I currently have the DISPLAY variable set to ":0.0" and this seems to
>> be fine for opening programs, such as NEdit. Any other setting (even
>> "hostname:0.0") and I cannot start programs such as editors and other
>> programs that open in a separate window. I get errors that say "can't
>
>> open display" and the like.
>>
>> When I run the software, if I leave out the command "-display
> hostname"
>> all video rendering is done behind the scenes, i.e., I can't view it.
>
>> I have tried replacing "hostname" with all of the following:
>> hostname:0.0
>> :0.0
>> hostname:0
>> localhost
>> localhost:0.0
>> localhost:0
>>
>> Any clues?
>
> I think you probably need to enable your X display to listen on the
> network.
>
> The software you are using is pretty strange. It should not be necessary
> to specify the -display option, it should use whatever DISPLAY is set
> to. However, given that it does what it does, you are pretty much at its
> mercy.
>
> By default the X display does not listen for network (TCP) connections,
> it allows local connections using a UNIX domain socket. If you have
> DISPLAY set to :0 clients will connect on the UNIX socket, but if you
> specify a hostname (even localhost) then the connection will be done on
> a TCP socket. If the X server isn't listening on a TCP socket then the
> connection will fail. This is a quite sensible security precaution (it
> prevents any non-local clients connecting to your display, even if you
> use the xhost + security disabler) but can cause problems for any
> software which expects to be able to connect via a TCP socket.
>
> To enable the TCP socket you need to modify the X server startup. How
> you do that depends on what version of RedHat you are using. For RH 4 it
> is set in /etc/X11/gdm/gdm.conf. To enable TCP connections you need to
> change the line:
> DisallowTCP=true
> to
> DisallowTCP=false
>
> In KDE desktop you can also set this using the System Settings->Login
> Screen dialog (I presume there's something similar for Gnome). In the
> Security tab un-check the box marked "Always disallow TCP connections to
> X server".
>
>
> --
> Nigel Wade, System Administrator, Space Plasma Physics Group,
> University of Leicester, Leicester, LE1 7RH, UK
> E-mail : nmw at ion.le.ac.uk
> Phone : +44 (0)116 2523548, Fax : +44 (0)116 2523555
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 6 May 2008 12:34:34 -0500
> From: obed <obed.listas at gmail.com>
> Subject: Re: Problem with X server
> To: "General Red Hat Linux discussion list" <redhat-list at redhat.com>
> Message-ID:
> <a2cca3fd0805061034q39dd4340w690d049bc039bbc at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> How did it work?... what was the problem?
>
> On Tue, May 6, 2008 at 12:18 PM, Wiedemann, Shane CIV NAVAIR
> <shane.wiedemann at navy.mil> wrote:
>> Success!! You solved my problem! Thank you for taking time to
>> respond...much appreciated.
>> Cheers,
>> Shane Wiedemann
>>
>>
>> -----Original Message-----
>> From: redhat-list-bounces at redhat.com
>>
>> [mailto:redhat-list-bounces at redhat.com] On Behalf Of Nigel Wade
>> Sent: Tuesday, May 06, 2008 9:09
>> To: General Red Hat Linux discussion list
>> Subject: Re: Problem with X server
>>
>>
>>
>> Wiedemann, Shane CIV NAVAIR wrote:
>> > So this problem is most likely user error; none the less...
>> > I have some software (only one other place has this software) that to
>> > view video windows that the software tries to pop up, you need to use
>> > the following command to get it to display:
>> > "software_name -display hostname", or at least that is what I am told.
>> > I have inserted my hostname where it says "hostname" and verified with
>>
>> > "uname" that my hostname is correct. I am not connecting to a remote
>> > machine, am not on a network and am running the software on a
>> > stand-alone machine. The vendors of the software do connect remotely,
>>
>> > I believe, and they can pop video display windows just fine. Whenever
>>
>> > I run the software, I get a message that says "Unable to connect to x
>> > server".
>> > I currently have the DISPLAY variable set to ":0.0" and this seems to
>> > be fine for opening programs, such as NEdit. Any other setting (even
>> > "hostname:0.0") and I cannot start programs such as editors and other
>> > programs that open in a separate window. I get errors that say "can't
>>
>> > open display" and the like.
>> >
>> > When I run the software, if I leave out the command "-display
>> hostname"
>> > all video rendering is done behind the scenes, i.e., I can't view it.
>>
>> > I have tried replacing "hostname" with all of the following:
>> > hostname:0.0
>> > :0.0
>> > hostname:0
>> > localhost
>> > localhost:0.0
>> > localhost:0
>> >
>> > Any clues?
>>
>> I think you probably need to enable your X display to listen on the
>> network.
>>
>> The software you are using is pretty strange. It should not be necessary
>> to specify the -display option, it should use whatever DISPLAY is set
>> to. However, given that it does what it does, you are pretty much at its
>> mercy.
>>
>> By default the X display does not listen for network (TCP) connections,
>> it allows local connections using a UNIX domain socket. If you have
>> DISPLAY set to :0 clients will connect on the UNIX socket, but if you
>> specify a hostname (even localhost) then the connection will be done on
>> a TCP socket. If the X server isn't listening on a TCP socket then the
>> connection will fail. This is a quite sensible security precaution (it
>> prevents any non-local clients connecting to your display, even if you
>> use the xhost + security disabler) but can cause problems for any
>> software which expects to be able to connect via a TCP socket.
>>
>> To enable the TCP socket you need to modify the X server startup. How
>> you do that depends on what version of RedHat you are using. For RH 4 it
>> is set in /etc/X11/gdm/gdm.conf. To enable TCP connections you need to
>> change the line:
>> DisallowTCP=true
>> to
>> DisallowTCP=false
>>
>> In KDE desktop you can also set this using the System Settings->Login
>> Screen dialog (I presume there's something similar for Gnome). In the
>> Security tab un-check the box marked "Always disallow TCP connections to
>> X server".
>>
>>
>> --
>> Nigel Wade, System Administrator, Space Plasma Physics Group,
>> University of Leicester, Leicester, LE1 7RH, UK
>> E-mail : nmw at ion.le.ac.uk
>> Phone : +44 (0)116 2523548, Fax : +44 (0)116 2523555
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>
>
>
> --
>
> obed.org.mx
>
>
>
> ------------------------------
>
> Message: 5
> Date: Tue, 6 May 2008 11:11:55 -0700
> From: "Wiedemann, Shane CIV NAVAIR" <shane.wiedemann at navy.mil>
> Subject: RE: Problem with X server
> To: "General Red Hat Linux discussion list" <redhat-list at redhat.com>
> Message-ID:
> <092382FFE5FB5A48959B9E031C8BF92768A6C5 at nawechlkez01.nadsuswe.nads.navy.mil>
>
> Content-Type: text/plain; charset="us-ascii"
>
> See Nigel Wade's response below...
>
> -----Original Message-----
> From: redhat-list-bounces at redhat.com
> [mailto:redhat-list-bounces at redhat.com] On Behalf Of obed
> Sent: Tuesday, May 06, 2008 10:35
> To: General Red Hat Linux discussion list
> Subject: Re: Problem with X server
>
> How did it work?... what was the problem?
>
> On Tue, May 6, 2008 at 12:18 PM, Wiedemann, Shane CIV NAVAIR
> <shane.wiedemann at navy.mil> wrote:
>> Success!! You solved my problem! Thank you for taking time to
>> respond...much appreciated.
>> Cheers,
>> Shane Wiedemann
>>
>>
>> -----Original Message-----
>> From: redhat-list-bounces at redhat.com
>>
>> [mailto:redhat-list-bounces at redhat.com] On Behalf Of Nigel Wade
>> Sent: Tuesday, May 06, 2008 9:09
>> To: General Red Hat Linux discussion list
>> Subject: Re: Problem with X server
>>
>>
>>
>> Wiedemann, Shane CIV NAVAIR wrote:
>> > So this problem is most likely user error; none the less...
>> > I have some software (only one other place has this software) that
>> to > view video windows that the software tries to pop up, you need
>> to use > the following command to get it to display:
>> > "software_name -display hostname", or at least that is what I am
> told.
>> > I have inserted my hostname where it says "hostname" and verified
>> with
>>
>> > "uname" that my hostname is correct. I am not connecting to a
>> remote > machine, am not on a network and am running the software on
>> a > stand-alone machine. The vendors of the software do connect
>> remotely,
>>
>> > I believe, and they can pop video display windows just fine.
>> Whenever
>>
>> > I run the software, I get a message that says "Unable to connect to
>
>> x > server".
>> > I currently have the DISPLAY variable set to ":0.0" and this seems
>> to > be fine for opening programs, such as NEdit. Any other setting
>> (even > "hostname:0.0") and I cannot start programs such as editors
>> and other > programs that open in a separate window. I get errors
>> that say "can't
>>
>> > open display" and the like.
>> >
>> > When I run the software, if I leave out the command "-display
>> hostname"
>> > all video rendering is done behind the scenes, i.e., I can't view
> it.
>>
>> > I have tried replacing "hostname" with all of the following:
>> > hostname:0.0
>> > :0.0
>> > hostname:0
>> > localhost
>> > localhost:0.0
>> > localhost:0
>> >
>> > Any clues?
>>
>> I think you probably need to enable your X display to listen on the
>> network.
>>
>> The software you are using is pretty strange. It should not be
>> necessary to specify the -display option, it should use whatever
>> DISPLAY is set to. However, given that it does what it does, you are
>> pretty much at its mercy.
>>
>> By default the X display does not listen for network (TCP)
>> connections, it allows local connections using a UNIX domain socket.
>> If you have DISPLAY set to :0 clients will connect on the UNIX
>> socket, but if you specify a hostname (even localhost) then the
>> connection will be done on a TCP socket. If the X server isn't
>> listening on a TCP socket then the connection will fail. This is a
>> quite sensible security precaution (it prevents any non-local clients
>
>> connecting to your display, even if you use the xhost + security
>> disabler) but can cause problems for any software which expects to be
> able to connect via a TCP socket.
>>
>> To enable the TCP socket you need to modify the X server startup. How
>
>> you do that depends on what version of RedHat you are using. For RH 4
>> it is set in /etc/X11/gdm/gdm.conf. To enable TCP connections you
>> need to change the line:
>> DisallowTCP=true
>> to
>> DisallowTCP=false
>>
>> In KDE desktop you can also set this using the System Settings->Login
>
>> Screen dialog (I presume there's something similar for Gnome). In the
>
>> Security tab un-check the box marked "Always disallow TCP connections
>> to X server".
>>
>>
>> --
>> Nigel Wade, System Administrator, Space Plasma Physics Group,
>> University of Leicester, Leicester, LE1 7RH, UK
>> E-mail : nmw at ion.le.ac.uk
>> Phone : +44 (0)116 2523548, Fax : +44 (0)116 2523555
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>
>
>
> --
>
> obed.org.mx
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
>
>
> ------------------------------
>
> Message: 6
> Date: Tue, 6 May 2008 11:43:49 -0700 (PDT)
> From: truc nguyen <nguyentruc_us at yahoo.com>
> Subject: RE: Problem with X server
> To: General Red Hat Linux discussion list <redhat-list at redhat.com>
> Message-ID: <805760.24200.qm at web36808.mail.mud.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Hi
>
> Why do you use a military account for this list?
>
> --- "Wiedemann, Shane CIV NAVAIR"
> <shane.wiedemann at navy.mil> wrote:
>
>> See Nigel Wade's response below...
>>
>> -----Original Message-----
>> From: redhat-list-bounces at redhat.com
>> [mailto:redhat-list-bounces at redhat.com] On Behalf Of
>> obed
>> Sent: Tuesday, May 06, 2008 10:35
>> To: General Red Hat Linux discussion list
>> Subject: Re: Problem with X server
>>
>> How did it work?... what was the problem?
>>
>> On Tue, May 6, 2008 at 12:18 PM, Wiedemann, Shane
>> CIV NAVAIR
>> <shane.wiedemann at navy.mil> wrote:
>> > Success!! You solved my problem! Thank you for
>> taking time to
>> > respond...much appreciated.
>> > Cheers,
>> > Shane Wiedemann
>> >
>> >
>> > -----Original Message-----
>> > From: redhat-list-bounces at redhat.com
>> >
>> > [mailto:redhat-list-bounces at redhat.com] On Behalf
>> Of Nigel Wade
>> > Sent: Tuesday, May 06, 2008 9:09
>> > To: General Red Hat Linux discussion list
>> > Subject: Re: Problem with X server
>> >
>> >
>> >
>> > Wiedemann, Shane CIV NAVAIR wrote:
>> > > So this problem is most likely user error; none
>> the less...
>> > > I have some software (only one other place has
>> this software) that
>> > to > view video windows that the software tries
>> to pop up, you need
>> > to use > the following command to get it to
>> display:
>> > > "software_name -display hostname", or at least
>> that is what I am
>> told.
>> > > I have inserted my hostname where it says
>> "hostname" and verified
>> > with
>> >
>> > > "uname" that my hostname is correct. I am not
>> connecting to a
>> > remote > machine, am not on a network and am
>> running the software on
>> > a > stand-alone machine. The vendors of the
>> software do connect
>> > remotely,
>> >
>> > > I believe, and they can pop video display
>> windows just fine.
>> > Whenever
>> >
>> > > I run the software, I get a message that says
>> "Unable to connect to
>>
>> > x > server".
>> > > I currently have the DISPLAY variable set to
>> ":0.0" and this seems
>> > to > be fine for opening programs, such as NEdit.
>> Any other setting
>> > (even > "hostname:0.0") and I cannot start
>> programs such as editors
>> > and other > programs that open in a separate
>> window. I get errors
>> > that say "can't
>> >
>> > > open display" and the like.
>> > >
>> > > When I run the software, if I leave out the
>> command "-display
>> > hostname"
>> > > all video rendering is done behind the scenes,
>> i.e., I can't view
>> it.
>> >
>> > > I have tried replacing "hostname" with all of
>> the following:
>> > > hostname:0.0
>> > > :0.0
>> > > hostname:0
>> > > localhost
>> > > localhost:0.0
>> > > localhost:0
>> > >
>> > > Any clues?
>> >
>> > I think you probably need to enable your X
>> display to listen on the
>> > network.
>> >
>> > The software you are using is pretty strange. It
>> should not be
>> > necessary to specify the -display option, it
>> should use whatever
>> > DISPLAY is set to. However, given that it does
>> what it does, you are
>> > pretty much at its mercy.
>> >
>> > By default the X display does not listen for
>> network (TCP)
>> > connections, it allows local connections using a
>> UNIX domain socket.
>> > If you have DISPLAY set to :0 clients will
>> connect on the UNIX
>> > socket, but if you specify a hostname (even
>> localhost) then the
>> > connection will be done on a TCP socket. If the X
>> server isn't
>> > listening on a TCP socket then the connection
>> will fail. This is a
>> > quite sensible security precaution (it prevents
>> any non-local clients
>>
>> > connecting to your display, even if you use the
>> xhost + security
>> > disabler) but can cause problems for any software
>> which expects to be
>> able to connect via a TCP socket.
>> >
>> > To enable the TCP socket you need to modify the X
>> server startup. How
>>
>> > you do that depends on what version of RedHat you
>> are using. For RH 4
>> > it is set in /etc/X11/gdm/gdm.conf. To enable TCP
>> connections you
>> > need to change the line:
>> > DisallowTCP=true
>> > to
>> > DisallowTCP=false
>> >
>> > In KDE desktop you can also set this using the
>> System Settings->Login
>>
>> > Screen dialog (I presume there's something similar
>> for Gnome). In the
>>
>> > Security tab un-check the box marked "Always
>> disallow TCP connections
>> > to X server".
>> >
>> >
>> > --
>> > Nigel Wade, System Administrator, Space Plasma
>> Physics Group,
>> > University of Leicester, Leicester,
>> LE1 7RH, UK
>> > E-mail : nmw at ion.le.ac.uk
>> > Phone : +44 (0)116 2523548, Fax : +44 (0)116
>> 2523555
>> >
>> > --
>> > redhat-list mailing list
>> > unsubscribe
>>
> mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> >
>> https://www.redhat.com/mailman/listinfo/redhat-list
>> >
>> > --
>> > redhat-list mailing list
>> > unsubscribe
>>
> mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> >
>> https://www.redhat.com/mailman/listinfo/redhat-list
>> >
>>
>>
>>
>> --
>>
>> obed.org.mx
>>
>> --
>> redhat-list mailing list
>> unsubscribe
>>
> mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>> --
>> redhat-list mailing list
>> unsubscribe
>>
> mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>
>
>
>
> ____________________________________________________________________________________
> Be a better friend, newshound, and
> know-it-all with Yahoo! Mobile. Try it now.
> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>
>
>
> ------------------------------
>
> Message: 7
> Date: Tue, 6 May 2008 12:41:31 -0700 (PDT)
> From: Sakthivel <sarkdts at yahoo.com>
> Subject: Hardware RAID break
> To: redhat-list at redhat.com
> Message-ID: <368707.22169.qm at web32605.mail.mud.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> hi,
>
> I have DELL Power edge 860 server with RHEL AS 4, in that server I have
> hardware RAID configuration with two 80GB SAS hard disk drive, Now I want
> to remove the RAID option and want to add 300 GB SAS hard disk drive
> instated of one 80 GB hard disk drive.
> My problem is how to remove(disable) the hardware RAID ?
>
> Thanks in advance
>
> Regards,
> Sakthi
>
>
> ---------------------------------
> Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it
> now.
>
> ------------------------------
>
> Message: 8
> Date: Tue, 06 May 2008 15:55:48 -0500
> From: Pat Riehecky <prieheck at iwu.edu>
> Subject: Re: Hardware RAID break
> To: General Red Hat Linux discussion list <redhat-list at redhat.com>
> Message-ID: <1210107348.6477.57.camel at thales.iwu.edu>
> Content-Type: text/plain
>
> The hardware raid is not a redhat function, you will need to talk to
> DELL on that
>
> Pat
>
> On Tue, 2008-05-06 at 12:41 -0700, Sakthivel wrote:
>> hi,
>>
>> I have DELL Power edge 860 server with RHEL AS 4, in that server I
>> have hardware RAID configuration with two 80GB SAS hard disk drive, Now I
>> want to remove the RAID option and want to add 300 GB SAS hard disk drive
>> instated of one 80 GB hard disk drive.
>> My problem is how to remove(disable) the hardware RAID ?
>>
>> Thanks in advance
>>
>> Regards,
>> Sakthi
>>
>>
>> ---------------------------------
>> Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try
>> it now.
>
>
>
> ------------------------------
>
> Message: 9
> Date: Tue, 6 May 2008 19:03:55 -0700 (PDT)
> From: Sakthivel <sarkdts at yahoo.com>
> Subject: Re: Hardware RAID break
> To: General Red Hat Linux discussion list <redhat-list at redhat.com>
> Message-ID: <698626.12431.qm at web32603.mail.mud.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Thanks Pat
>
> Pat Riehecky <prieheck at iwu.edu> wrote: The hardware raid is not a redhat
> function, you will need to talk to
> DELL on that
>
> Pat
>
> On Tue, 2008-05-06 at 12:41 -0700, Sakthivel wrote:
>> hi,
>>
>> I have DELL Power edge 860 server with RHEL AS 4, in that server I
>> have hardware RAID configuration with two 80GB SAS hard disk drive, Now I
>> want to remove the RAID option and want to add 300 GB SAS hard disk drive
>> instated of one 80 GB hard disk drive.
>> My problem is how to remove(disable) the hardware RAID ?
>>
>> Thanks in advance
>>
>> Regards,
>> Sakthi
>>
>>
>> ---------------------------------
>> Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try
>> it now.
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
>
>
> ---------------------------------
> Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it
> now.
>
> ------------------------------
>
> Message: 10
> Date: Wed, 7 May 2008 09:35:53 +0530
> From: "Joy Methew" <ml4joy at gmail.com>
> Subject: Re: Proxy
> To: "General Red Hat Linux discussion list" <redhat-list at redhat.com>
> Message-ID:
> <64fd0700805062105x3ff7bc4el339aeba53816d8c9 at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> peter and obed thanks for reply..................
>
> i wann explain my side.....i wann show connection b/w client and web
> server with proxy.
> client is configured with proxy connection.
>
> step1: client write www.yahoo.com.
> step2: dns will resolve www.yahoo.com in ip address ok.
> step3: then connection will establish b/w client and web server threw
> proxy.
> step:4 proxy will get ip address of www.yahoo.com bcoz dns will provide
> ip address to client.
> am i right or not ???
> after this i will ask my question......
>
> thanks
> Regards
> Joy Methew
>
>
>
> On Tue, May 6, 2008 at 9:04 PM, obed <obed.listas at gmail.com> wrote:
>
>> Peter said that squid doesn't block ip addresses, blocks CNAMES,
>> canonic names i mean www.somethingblabla.com...
>>
>>
>> On Tue, May 6, 2008 at 3:35 AM, Joy Methew <ml4joy at gmail.com> wrote:
>> > peter i m not getting you properly........
>> > can you explain briefly....???
>> >
>> > On Tue, May 6, 2008 at 11:28 AM, peter winterflood <
>> > peter.winterflood at ossi.co.uk> wrote:
>> >
>> > > proxies dont go by ipaddress like firewalls, they go by web address
>> ie
>> > > url, so thats all that matters
>> > >
>> > > regards
>> > >
>> > > peter
>> >
>> >
>> > >
>> > > hello all...............
>> > > > does proxy support virtual hosting???
>> > > > if the virtual hosting enable in apache web server....can we block
>> > > > websites
>> > > > from proxy(squid)????
>> > > >
>> > > > Regards
>> > > > Joy Methew
>> > > >
>> > > >
>> > >
>> > >
>> > --
>> > redhat-list mailing list
>> > unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> > https://www.redhat.com/mailman/listinfo/redhat-list
>> >
>>
>>
>>
>> --
>>
>> obed.org.mx
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>
>
> ------------------------------
>
> Message: 11
> Date: Wed, 7 May 2008 13:09:40 +0200
> From: "Koray Sonmez [Oytek]" <ksonmez at oytek.com.tr>
> Subject: http request
> To: "General Red Hat Linux discussion list" <redhat-list at redhat.com>
> Message-ID:
> <96E68311E829E147865DC064BE1346CF01468760 at oytexc01.oytek.com.tr>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi,
>
> In my DNS server i want to send http request. How can i open http port
> and control http request is working?
>
> Regards,
> Koray
>
> Bu e-mail'in tum icerigi gonderenin kisisel tasarrufu ile olusturulmus ve
> gonderilmistir. Oyak Teknoloji Bilisim ve Kart Hizmetleri A.S. bu e-mail
> icerigi hakkinda sorumluluk kabul etmez.
> This e-mail has been sent by the sender under his/her own individual
> discretion. Oyak Teknoloji Bilisim ve Kart Hizmetleri A.S. accepts no
> responsibility.
>
>
>
> ------------------------------
>
> Message: 12
> Date: Wed, 7 May 2008 15:51:46 +0530
> From: "Nirmal Pathak" <nirmal.pathak at gmail.com>
> Subject: lm_sensors on RHEL5 not working!
> To: "General Red Hat Linux discussion list" <redhat-list at redhat.com>
> Message-ID:
> <7c9ab4ad0805070321t7cdc7e4h3bbd42a72452b99b at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> Hi,
>
> In attempting to configure lm_sensors support under RHEL5, I can not
> determine what sensors modules are available. I'm running on an HP 6715b
> and
> can see thermal info reported under the /proc tree. But can't find any
> sensor kernel module to load.
> Underl RHEL4 I could modprobe i2c-dev and the i2c_sensor.ko module would
> be
> loaded. No luck under RHEL5.
>
> I've run sensors-detect several times and it always says it can't detect
> any
> sensors. I've loaded the i2c_dev module and the lm85 module, but same
> result.
> The lm_sensors service can not be started.
> When I run the sensors command by itself, it always gives a "General parse
> error", using the stock /etc/sensors.conf file.
>
> Any idea where I should look?
>
> --
> Nirmal D Pathak.
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> I was born free!
> No Gates and Windows can restrict my Freedom!!
>
> Enjoy Linux!
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
> ------------------------------
>
> Message: 13
> Date: Wed, 7 May 2008 11:37:05 +0100 (BST)
> From: Paul Malinowski <pmalinowskieu at yahoo.co.uk>
> Subject: Re: http request
> To: General Red Hat Linux discussion list <redhat-list at redhat.com>
> Message-ID: <935977.68944.qm at web23107.mail.ird.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Hi Koray,
>
> First, statment "In my DNS server i want to send http request." doesn't
> mean a lot. As long as your dns resolver is configured properly (mainly
> /etc/resolv.conf) you should be able to make a proper dns resolution of
> host in url of http request.
>
> As for a http data itself the easiest way to track what is going on
> between client and server is to use tcpdump on client side:
>
> tcpdump -w file tcp and dst port 80
>
>
> If you want to create some particular request I suggest looking at curl
> man page.
>
> Kind Regards,
> Paul Malinowski
>
> "Koray Sonmez [Oytek]" <ksonmez at oytek.com.tr> wrote:
> Hi,
>
> In my DNS server i want to send http request. How can i open http port
> and control http request is working?
>
> Regards,
> Koray
>
> Bu e-mail'in tum icerigi gonderenin kisisel tasarrufu ile olusturulmus ve
> gonderilmistir. Oyak Teknoloji Bilisim ve Kart Hizmetleri A.S. bu e-mail
> icerigi hakkinda sorumluluk kabul etmez.
> This e-mail has been sent by the sender under his/her own individual
> discretion. Oyak Teknoloji Bilisim ve Kart Hizmetleri A.S. accepts no
> responsibility.
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
>
>
> ---------------------------------
> Sent from Yahoo! Mail.
> A Smarter Email.
>
> ------------------------------
>
> Message: 14
> Date: Wed, 7 May 2008 08:18:19 -0300
> From: "Marcos Aurelio Rodrigues" <deigratia33 at gmail.com>
> Subject: Re: CUPS scheduler dies when adding smb-shared Windows
> printer
> To: "General Red Hat Linux discussion list" <redhat-list at redhat.com>
> Message-ID:
> <ca4b054f0805070418s5b4860c1t1cc705663febf5f9 at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> What about netbios? Does the firewall is allowing the traffic?
>
>
> --
> ========================================
> Marcos Aurelio Rodrigues (DEiGrAtiA-33)
> <deigratia33 at gmail.com>
> CCNA, MCSO, Security+
> Mirabilia laudo semprer, Dei
> ========================================
>
>
> On Tue, May 6, 2008 at 11:34 AM, Andrew Elliott <Andrew.Elliott at istat.ca>
> wrote:
>
>>
>> Yes, there are 2 routers in between, but the port is not blocked.
>>
>> I can connect fine with telnet to port 445.
>>
>> Andrew.
>>
>> -----Original Message-----
>> From: redhat-list-bounces at redhat.com [mailto:
>> redhat-list-bounces at redhat.com]
>> On Behalf Of Marcos Aurelio Rodrigues
>> Sent: Monday, May 05, 2008 3:38 PM
>> To: General Red Hat Linux discussion list
>> Subject: Re: CUPS scheduler dies when adding smb-shared Windows printer
>>
>> is there a firewall between the networks? can you connect to the 445 tcp?
>>
>> #telnet xxx.xxx.xxx.xxx 445
>>
>>
>> --
>> ========================================
>> Marcos Aurelio Rodrigues (DEiGrAtiA-33)
>> <deigratia33 at gmail.com>
>> CCNA, MCSO, Security+
>> Mirabilia laudo semprer, Dei
>> ========================================
>>
>>
>> On Thu, May 1, 2008 at 3:07 PM, Andrew Elliott <Andrew.Elliott at istat.ca>
>> wrote:
>>
>> >
>> >
>> > Trying to add a printer that's shared on a Windows workstation on a
>> > different subnet, error_log isn't very helpful, just shows:
>> >
>> >
>> >
>> > "Scheduler shutting down due to SIGTERM"
>> >
>> >
>> >
>> > I adjusted cupsd.conf to "Allow All" connections from remote networks.
>> >
>> >
>> >
>> > I'm using the following command to set up the printer:
>> >
>> >
>> >
>> > /usr/sbin/lpadmin -p printer1 -v smb://print:print@XX.XXX.XX.XXX
>> > /printshare
>> >
>> >
>> >
>> > Error:
>> >
>> >
>> >
>> > lpadmin: add-printer (set device) failed:
>> server-error-service-unavailable
>> > -
>> > service dies and has to be restarted after that
>> >
>> >
>> >
>> > RHEL v.3.2.3-42
>> >
>> > cups-libs-1.1.17-13.3.12
>> >
>> > cups-1.1.17-13.3.45
>> >
>> >
>> >
>> > I do get information when running "smbclient -L XX.XXX.XX.XXX -U print"
>> > but
>> > it also gives the following error:
>> >
>> >
>> >
>> > session request to 10.207.92.127 failed (Called name not present)
>> >
>> > session request to 10 failed (Called name not present)
>> >
>> >
>> >
>> > updating to the most recent RHN patches is NOT possible at this time,
>> it's
>> > a
>> > 24x7 environment (uptime 280 days).
>> >
>> >
>> >
>> > Any ideas?
>> >
>> >
>> >
>> > The printer adds fine on my test server connecting to the local
>> > internal
>> > network (same package versions, os, etc.).
>> >
>> >
>> >
>> > Thanks in advance
>> >
>> > Andrew Elliott.
>> >
>> > --
>> > redhat-list mailing list
>> > unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> > https://www.redhat.com/mailman/listinfo/redhat-list
>> >
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>
>
> ------------------------------
>
> Message: 15
> Date: Wed, 7 May 2008 08:22:01 -0300
> From: "Marcos Aurelio Rodrigues" <deigratia33 at gmail.com>
> Subject: Re: CUPS scheduler dies when adding smb-shared Windows
> printer
> To: "General Red Hat Linux discussion list" <redhat-list at redhat.com>
> Message-ID:
> <ca4b054f0805070422o5e06f353y598d741b12323223 at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> What about netbios? Does the firewall allow the traffic on ports UDP
> 137,138,139?
>
>
> --
> ========================================
> Marcos Aurelio Rodrigues (DEiGrAtiA-33)
> <deigratia33 at gmail.com>
> CCNA, MCSO, Security+
> Mirabilia laudo semprer, Dei
> ========================================
>
> On Tue, May 6, 2008 at 11:34 AM, Andrew Elliott <Andrew.Elliott at istat.ca>
> wrote:
>
>>
>> Yes, there are 2 routers in between, but the port is not blocked.
>>
>> I can connect fine with telnet to port 445.
>>
>> Andrew.
>>
>> -----Original Message-----
>> From: redhat-list-bounces at redhat.com [mailto:
>> redhat-list-bounces at redhat.com]
>> On Behalf Of Marcos Aurelio Rodrigues
>> Sent: Monday, May 05, 2008 3:38 PM
>> To: General Red Hat Linux discussion list
>> Subject: Re: CUPS scheduler dies when adding smb-shared Windows printer
>>
>> is there a firewall between the networks? can you connect to the 445 tcp?
>>
>> #telnet xxx.xxx.xxx.xxx 445
>>
>>
>> --
>> ========================================
>> Marcos Aurelio Rodrigues (DEiGrAtiA-33)
>> <deigratia33 at gmail.com>
>> CCNA, MCSO, Security+
>> Mirabilia laudo semprer, Dei
>> ========================================
>>
>>
>> On Thu, May 1, 2008 at 3:07 PM, Andrew Elliott <Andrew.Elliott at istat.ca>
>> wrote:
>>
>> >
>> >
>> > Trying to add a printer that's shared on a Windows workstation on a
>> > different subnet, error_log isn't very helpful, just shows:
>> >
>> >
>> >
>> > "Scheduler shutting down due to SIGTERM"
>> >
>> >
>> >
>> > I adjusted cupsd.conf to "Allow All" connections from remote networks.
>> >
>> >
>> >
>> > I'm using the following command to set up the printer:
>> >
>> >
>> >
>> > /usr/sbin/lpadmin -p printer1 -v smb://print:print@XX.XXX.XX.XXX
>> > /printshare
>> >
>> >
>> >
>> > Error:
>> >
>> >
>> >
>> > lpadmin: add-printer (set device) failed:
>> server-error-service-unavailable
>> > -
>> > service dies and has to be restarted after that
>> >
>> >
>> >
>> > RHEL v.3.2.3-42
>> >
>> > cups-libs-1.1.17-13.3.12
>> >
>> > cups-1.1.17-13.3.45
>> >
>> >
>> >
>> > I do get information when running "smbclient -L XX.XXX.XX.XXX -U print"
>> > but
>> > it also gives the following error:
>> >
>> >
>> >
>> > session request to 10.207.92.127 failed (Called name not present)
>> >
>> > session request to 10 failed (Called name not present)
>> >
>> >
>> >
>> > updating to the most recent RHN patches is NOT possible at this time,
>> it's
>> > a
>> > 24x7 environment (uptime 280 days).
>> >
>> >
>> >
>> > Any ideas?
>> >
>> >
>> >
>> > The printer adds fine on my test server connecting to the local
>> > internal
>> > network (same package versions, os, etc.).
>> >
>> >
>> >
>> > Thanks in advance
>> >
>> > Andrew Elliott.
>> >
>> > --
>> > redhat-list mailing list
>> > unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> > https://www.redhat.com/mailman/listinfo/redhat-list
>> >
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>
>
> ------------------------------
>
> Message: 16
> Date: Wed, 7 May 2008 17:05:33 +0200
> From: "Kenneth Holter" <kenneho.ndu at gmail.com>
> Subject: Shell hangs when using "screen" and "emacs"
> To: redhat-list at redhat.com
> Message-ID:
> <c25f25140805070805r6add1124rf28e31ba26d8d40d at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Hi.
>
> I log onto your servers using SSH, and typically run emacs within a
> screen session. I try and use shortcuts (for example Ctrl plus some
> key) in emacs, but whenever I type an erroneous shortcut the entire
> shell freezes and I'm forced to kill the window and restart the SSH
> session.
>
> I think this problem has something to do with using emacs within a
> screen session, but I'm not sure how to debug it. Has anyone had the
> same problem, and knows how to correct it?
>
> Regrads,
> kenneho
>
>
> ------------------------------
>
> Message: 17
> Date: Wed, 7 May 2008 16:12:07 +0100
> From: "Gerrard Geldenhuis" <Gerrard.Geldenhuis at datacash.com>
> Subject: RE: Shell hangs when using "screen" and "emacs"
> To: "General Red Hat Linux discussion list" <redhat-list at redhat.com>
> Message-ID:
> <A78DB34D00374344A0AB65B6523C05DC02F08752 at marsden.win.datacash.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Hmmm, difficult to debug. The best would be to have a key logger to see
> what keystrokes you type and then work out what screen is actually
> trying to do.
>
> I like screen but it does not work well with bash in emacs mode using
> the standard key bindings.
>
> Try Ctrl+a " to get a list of windows if it freezes up again.
>
> It could also be the bash session itself that freezes up. I know it can
> do that but I can't for the life of me remember what the shortcut was to
> freeze or unfreeze it.
>
> Not a very helpful reply, I share your pain. :-)
>
> Regards
>
>> -----Original Message-----
>> From: redhat-list-bounces at redhat.com [mailto:redhat-list-
>> bounces at redhat.com] On Behalf Of Kenneth Holter
>> Sent: 07 May 2008 16:06
>> To: redhat-list at redhat.com
>> Subject: Shell hangs when using "screen" and "emacs"
>>
>> Hi.
>>
>> I log onto your servers using SSH, and typically run emacs within a
>> screen session. I try and use shortcuts (for example Ctrl plus some
>> key) in emacs, but whenever I type an erroneous shortcut the entire
>> shell freezes and I'm forced to kill the window and restart the SSH
>> session.
>>
>> I think this problem has something to do with using emacs within a
>> screen session, but I'm not sure how to debug it. Has anyone had the
>> same problem, and knows how to correct it?
>>
>> Regrads,
>> kenneho
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>
>
>
> ------------------------------
>
> Message: 18
> Date: Wed, 7 May 2008 11:50:29 -0400 (EDT)
> From: presgas at gmail.com
> Subject: RE: Shell hangs when using "screen" and "emacs"
> To: General Red Hat Linux discussion list <redhat-list at redhat.com>
> Message-ID:
> <alpine.DEB.1.00.0805071146240.7716 at iu-lsps-youkai.uits.indiana.edu>
> Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed
>
> On Wed, 7 May 2008, Gerrard Geldenhuis wrote:
>
>> Date: Wed, 7 May 2008 16:12:07 +0100
>> From: Gerrard Geldenhuis <Gerrard.Geldenhuis at datacash.com>
>> Reply-To: General Red Hat Linux discussion list <redhat-list at redhat.com>
>> To: General Red Hat Linux discussion list <redhat-list at redhat.com>
>> Subject: RE: Shell hangs when using "screen" and "emacs"
>>
>> Hmmm, difficult to debug. The best would be to have a key logger to see
>> what keystrokes you type and then work out what screen is actually
>> trying to do.
>>
>> I like screen but it does not work well with bash in emacs mode using
>> the standard key bindings.
>>
>> Try Ctrl+a " to get a list of windows if it freezes up again.
>>
>> It could also be the bash session itself that freezes up. I know it can
>> do that but I can't for the life of me remember what the shortcut was to
>> freeze or unfreeze it.
>>
>> Not a very helpful reply, I share your pain. :-)
>>
>> Regards
>>
>>> -----Original Message-----
>>> From: redhat-list-bounces at redhat.com [mailto:redhat-list-
>>> bounces at redhat.com] On Behalf Of Kenneth Holter
>>> Sent: 07 May 2008 16:06
>>> To: redhat-list at redhat.com
>>> Subject: Shell hangs when using "screen" and "emacs"
>>>
>>> Hi.
>>>
>>> I log onto your servers using SSH, and typically run emacs within a
>>> screen session. I try and use shortcuts (for example Ctrl plus some
>>> key) in emacs, but whenever I type an erroneous shortcut the entire
>>> shell freezes and I'm forced to kill the window and restart the SSH
>>> session.
>>>
>>> I think this problem has something to do with using emacs within a
>>> screen session, but I'm not sure how to debug it. Has anyone had the
>>> same problem, and knows how to correct it?
>>>
>>> Regrads,
>>> kenneho
>>> --
>>> redhat-list mailing list
>>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>
> I remembered that there was a package in the debian archives that "is like
> screen for emacs", but then I stumbled across this:
>
> http://emacsen.livejournal.com/151356.html
>
> Hope that may help you out.
>
> x---------------
> Robert Freeman-Day
> ---------------
> I would really like you to be on my side,
> but the side you show me isn't what I had in mind.
>
> -Judybats
>
> GPG Public Key:
> http://keyserver.ubuntu.com:11371/pks/lookup?op=get&search=0xBA9DF9ED3E4C7D36
>
>
>
> ------------------------------
>
> __
> redhat-list mailing list
> Unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
> End of redhat-list Digest, Vol 51, Issue 8
> ******************************************
>
More information about the redhat-list
mailing list