How to Clone IDE to SATA

[sanjay dass]

Yes I have tried Clonezilla, it also fails with same error



On Mon, Jan 19, 2009 at 2:08 PM, bedo <bedo.wang at gmail.com> wrote:

> maybe you can try ghost
>
> 2009/1/19 sanjay dass <sanjays.dass117 at gmail.com>
>
> >  Hi All
> >
> >
> > I am trying to make mirror copy of hard drive, The RedHat 4.0 is
> > installed on IDE hard drive.
> > the partitions are /dev/hda1 mounted as boot,
> > /dev/hda2 mounted as /, /dev/hda3 mounted ad swap
> >
> >
> > lsmod command was not showing ata_piix loaded, so I compiled the
> > kernel for SATA support then I ran the lsmod command and found that
> > lsmod is showing ata_piix loaded
> >
> > the output of lsmod
> >
> > ata_piix               17609  6
> >
> > libata                 96857  ata_piix
> >
> > also I added alias in modprobe.conf file
> > alias scsi_hostadapter ata_piix
> >
> > For mirroring I took SATA drive and created exact partition as IDE,
> > and then copy the / data except /boot, /proc directories through rsync
> >
> > rsync -av / --exclude=/boot --exclude=/proc --exclude=/mnt /mnt/sata
> >
> > then I transferd the Image of boot partition on /dev/sda1 through dd
> > command.
> >
> > and followed the following steps
> > 1) changed the FSTAB file, removed /dev/hda1 and replaced /dev/sda1
> >
> > 2) edited grub.conf and changed root=/dev/sda3
> > 3) reinstalled grub on /dev/sda
> >
> > and tried to boot the machine from SATA hard drive, I get error when
> > RedHat is Loading
> >
> > mount error 6 and mount error 22
> >
> > kernel is not syncing
> >
> > Could some one please help how to I transfer Image from IDE to SATA
> >
> > Regards
> > Sanjay
> >  --
> > redhat-list mailing list
> > unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > https://www.redhat.com/mailman/listinfo/redhat-list
> >
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>