Reg : RHEL 5.0 Installatio
Ramakrishnan Seshadhri
ramakrishnan42 at gmail.com
Sun May 3 10:37:01 UTC 2009
Yes,
I am aware of that. I believe so far I haven't posted any sensitive data.
(Ip address is anyway should be given)
I will try the test. Actually last time I was not able to connect at all.
After a reboot I was able to connect. But still load is 2.8+.
Ram
On Sun, May 3, 2009 at 2:31 PM, Geofrey Rainey <Geofrey.Rainey at tvnz.co.nz>wrote:
> Weird, you shouldn't be getting any packet loss at all. I wonder if
> there's
> Some faulty network device? Try these tests:
>
> 1. Ping from yourself to yourself; ping localhost, and ping the proper
> qualified domain name - do you get any drops then?
>
> 2. Ping from another host on the same subnet, do you get any drops then?
>
> 3. ping from a host on a different subnet.
>
> (also, in future be weary of transmitting lots of information about your
> servers to a mailing list, your info might be posted on the internet -
> just be mindful of that).
>
>
> -----Original Message-----
> From: redhat-list-bounces at redhat.com
> [mailto:redhat-list-bounces at redhat.com] On Behalf Of Ramakrishnan
> Seshadhri
> Sent: Sunday, 3 May 2009 10:25 p.m.
> To: General Red Hat Linux discussion list
> Subject: Re: Reg : RHEL 5.0 Installatio
>
> Yes during ping, packets are dropped. It gives like the one below
>
> [root at dbbld u02]# ping dbbld.domain.com
> PING appsbld.pharmatrade.pharmatrade.com (132.1.1.126) 56(84) bytes of
> data.
> 64 bytes from dbbld.domain.com (132.1.1.126): icmp_seq=2 ttl=64
> time=0.122
> ms
> 64 bytes from dbbld.domain.com (132.1.1.126): icmp_seq=3 ttl=64
> time=0.090
> ms
> 64 bytes from dbbld.domain.com (132.1.1.126): icmp_seq=4 ttl=64
> time=0.099
> ms
> 64 bytes from dbbld.domain.com (132.1.1.126): icmp_seq=5 ttl=64
> time=0.091
> ms
> 64 bytes from dbbld.domain.com (132.1.1.126): icmp_seq=6 ttl=64
> time=0.095
> ms
>
> --- dbbld.domain.com ping statistics ---
> 6 packets transmitted, 5 received, 16% packet loss, time 5000ms
> rtt min/avg/max/mdev = 0.090/0.099/0.122/0.014 ms
>
> I have all host entries in place and servers registered in DNS
>
> Here is the output of "sar -q"
>
> [root at dbbld u02]# sar -q
> Linux 2.6.18-53.el5PAE (dbbld) 05/03/2009
>
> 09:50:01 AM runq-sz plist-sz ldavg-1 ldavg-5 ldavg-15
> 10:00:01 AM 0 189 0.12 0.08 0.06
> 10:10:01 AM 0 185 0.01 0.04 0.04
> 10:20:01 AM 0 183 0.09 0.05 0.02
> 10:30:01 AM 0 183 0.04 0.05 0.00
> 10:40:01 AM 0 185 0.05 0.06 0.00
> Average: 0 185 0.06 0.06 0.02
>
> 10:46:40 AM LINUX RESTART
>
> 10:54:21 AM LINUX RESTART
>
> 11:00:01 AM runq-sz plist-sz ldavg-1 ldavg-5 ldavg-15
> 11:10:01 AM 0 173 0.03 0.12 0.21
> Average: 0 173 0.03 0.12 0.21
>
> 11:22:15 AM LINUX RESTART
>
> 11:38:03 AM LINUX RESTART
>
> 11:40:01 AM runq-sz plist-sz ldavg-1 ldavg-5 ldavg-15
> 11:50:01 AM 0 189 0.61 0.72 0.53
> Average: 0 189 0.61 0.72 0.53
>
> 11:59:06 AM LINUX RESTART
>
> 12:00:02 PM runq-sz plist-sz ldavg-1 ldavg-5 ldavg-15
> 12:10:01 PM 0 189 0.24 1.20 0.96
> 12:20:01 PM 0 188 0.09 0.22 0.52
> 12:30:01 PM 0 188 0.04 0.06 0.28
> 12:40:01 PM 0 195 3.19 1.54 0.83
> 12:50:01 PM 0 191 2.69 1.37 0.96
> 01:00:02 PM 0 192 0.15 0.73 0.82
> Average: 0 190 1.07 0.85 0.73
>
> 01:04:33 PM LINUX RESTART
>
> 01:10:01 PM runq-sz plist-sz ldavg-1 ldavg-5 ldavg-15
> 01:20:01 PM 0 186 2.66 2.47 1.67
> 01:30:01 PM 0 176 2.58 2.64 2.12
> Average: 0 181 2.62 2.56 1.90
>
> 01:55:25 PM LINUX RESTART
>
> 02:00:01 PM runq-sz plist-sz ldavg-1 ldavg-5 ldavg-15
> 02:10:01 PM 0 172 1.84 1.75 1.16
> 02:20:01 PM 0 171 1.84 1.84 1.47
> Average: 0 172 1.84 1.79 1.31
>
>
> Ram
>
> On Sun, May 3, 2009 at 2:18 PM, Geofrey Rainey
> <Geofrey.Rainey at tvnz.co.nz>wrote:
>
> > That logical volume for swap is pretty weird, no point in having that
> > there I think, but not to worry for the moment, I don't think it would
> > cause issues like you're experiencing.
> >
> > What's the output of "sar -q".
> >
> > Also, if you ping the server any other time does it always drop
> packets?
> >
> > -----Original Message-----
> > From: redhat-list-bounces at redhat.com
> > [mailto:redhat-list-bounces at redhat.com] On Behalf Of Ramakrishnan
> > Seshadhri
> > Sent: Sunday, 3 May 2009 10:13 p.m.
> > To: General Red Hat Linux discussion list
> > Subject: Re: Reg : RHEL 5.0 Installatio
> >
> > Here is the output for swapon -s
> >
> > [root at dbbld ~]# swapon -s
> > Filename Type Size Used
> > Priority
> > /dev/mapper/VolGroup00-LogVol01 partition 950264 0
> > -1
> > /dev/sda5 partition 9438148 0
> > -2
> >
> >
> > Ram
> >
> > On Sun, May 3, 2009 at 2:10 PM, Geofrey Rainey
> > <Geofrey.Rainey at tvnz.co.nz>wrote:
> >
> > > I wouldn't worry about that zombie. What about my earlier question
> > about
> > > The output of swapon -s?
> > >
> > >
> > > -----Original Message-----
> > > From: redhat-list-bounces at redhat.com
> > > [mailto:redhat-list-bounces at redhat.com] On Behalf Of Ramakrishnan
> > > Seshadhri
> > > Sent: Sunday, 3 May 2009 10:03 p.m.
> > > To: General Red Hat Linux discussion list
> > > Subject: Re: Reg : RHEL 5.0 Installatio
> > >
> > > Hi,
> > >
> > >
> > > I can see that there is a Zonbie
> > >
> > > [root at dbbld etc]# ps -ef | grep ifup-eth
> > > root 14335 3476 1 14:02 ? 00:00:00 [ifup-eth] <defunct>
> > > root 14362 6988 0 14:02 pts/2 00:00:00 grep ifup-eth
> > >
> > > what is this process. I am not able to kill this.
> > >
> > >
> > > Ram.S
> > >
> > > On Sun, May 3, 2009 at 1:59 PM, Ramakrishnan Seshadhri <
> > > ramakrishnan42 at gmail.com> wrote:
> > >
> > > > Hi
> > > >
> > > > Here is the ifconfig report below
> > > >
> > > > [root at dbbld ~]# ifconfig
> > > > bond0 Link encap:Ethernet HWaddr 00:21:5E:2D:90:5E
> > > > inet addr:132.1.1.125 Bcast:132.1.255.255
> > Mask:255.255.0.0
> > > > inet6 addr: fe80::221:5eff:fe2d:905e/64 Scope:Link
> > > > UP BROADCAST RUNNING MASTER MULTICAST MTU:1500
> Metric:1
> > > > RX packets:1150 errors:0 dropped:0 overruns:0 frame:0
> > > > TX packets:961 errors:0 dropped:0 overruns:0 carrier:0
> > > > collisions:0 txqueuelen:0
> > > > RX bytes:93435 (91.2 KiB) TX bytes:87481 (85.4 KiB)
> > > >
> > > > eth0 Link encap:Ethernet HWaddr 00:21:5E:2D:90:5E
> > > > inet6 addr: fe80::221:5eff:fe2d:905e/64 Scope:Link
> > > > UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
> > > > RX packets:1150 errors:0 dropped:0 overruns:0 frame:0
> > > > TX packets:961 errors:0 dropped:0 overruns:0 carrier:0
> > > > collisions:0 txqueuelen:1000
> > > > RX bytes:93435 (91.2 KiB) TX bytes:87481 (85.4 KiB)
> > > > Interrupt:114 Memory:da000000-da012100
> > > >
> > > > eth1 Link encap:Ethernet HWaddr 00:21:5E:2D:90:60
> > > > UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
> > > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > > > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> > > > collisions:0 txqueuelen:1000
> > > > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
> > > > Interrupt:82 Memory:d8000000-d8012100
> > > >
> > > > lo Link encap:Local Loopback
> > > > inet addr:127.0.0.1 Mask:255.0.0.0
> > > > inet6 addr: ::1/128 Scope:Host
> > > > UP LOOPBACK RUNNING MTU:16436 Metric:1
> > > > RX packets:2776 errors:0 dropped:0 overruns:0 frame:0
> > > > TX packets:2776 errors:0 dropped:0 overruns:0 carrier:0
> > > > collisions:0 txqueuelen:0
> > > > RX bytes:3321472 (3.1 MiB) TX bytes:3321472 (3.1 MiB)
> > > >
> > > > the collision field is zero. But the TX is bytes:87481. There are
> > Two
> > > NIC
> > > > configured to the Virtual IP bond0. Is there a problem there.
> > > > Is there a log while where I could check the errors.
> > > >
> > > > Ram
> > > >
> > > >
> > > > On Sun, May 3, 2009 at 1:41 PM, Geofrey Rainey
> > > <Geofrey.Rainey at tvnz.co.nz>wrote:
> > > >
> > > >> 1. look in the output of ifconfig and you'll see a "collisions"
> > field
> > > >> which should have a value of 0.
> > > >>
> > > >> 2. look at the output of either "ethtool <interface>", or
> mii-tool
> > > >> <interface>, and you will see what the port speed is. This must
> > match
> > > >> the port speed of your switch (your network guys will tell you if
> > the
> > > >> switch is
> > > >> 100Mb or 1000Mb etc).
> > > >>
> > > >> Look for output like this which says the interface is running at
> > > >> 100Mb/s. This is bad if you're connected to a 1000Mb switch.
> > > >>
> > > >> Advertised auto-negotiation: Yes
> > > >> Speed: 100Mb/s
> > > >> Duplex: Full
> > > >>
> > > >> -----Original Message-----
> > > >> From: redhat-list-bounces at redhat.com
> > > >> [mailto:redhat-list-bounces at redhat.com] On Behalf Of Ramakrishnan
> > > >> Seshadhri
> > > >> Sent: Sunday, 3 May 2009 9:30 p.m.
> > > >> To: General Red Hat Linux discussion list
> > > >> Subject: Re: Reg : RHEL 5.0 Installatio
> > > >>
> > > >> can you please brief how to check that.
> > > >>
> > > >> Ram.
> > > >>
> > > >> On Sun, May 3, 2009 at 1:21 PM, Geofrey Rainey
> > > >> <Geofrey.Rainey at tvnz.co.nz>wrote:
> > > >>
> > > >> > Look in "ifconfig", are there any collisions on the interface?
> > > >> >
> > > >> > Also, perhaps the switch hasn't properly negotiated the speed
> > with
> > > >> > Your interface?
> > > >> >
> > > >> > -----Original Message-----
> > > >> > From: redhat-list-bounces at redhat.com
> > > >> > [mailto:redhat-list-bounces at redhat.com] On Behalf Of
> Ramakrishnan
> > > >> > Seshadhri
> > > >> > Sent: Sunday, 3 May 2009 9:18 p.m.
> > > >> > To: General Red Hat Linux discussion list
> > > >> > Subject: Re: Reg : RHEL 5.0 Installatio
> > > >> >
> > > >> > Actually the problem is here. Once I reboot the server the load
> > is
> > > >> > around
> > > >> > 2.8 and I am not able to ping the server (All firewalls are
> > turned
> > > >> off).
> > > >> > After sometime I am able to telnet or ping the server. While
> > > pinging
> > > >> it
> > > >> > drops 50% of packets.
> > > >> > both telnet and ssh services are enabled.
> > > >> >
> > > >> >
> > > >> > Ram
> > > >> >
> > > >> > On Sun, May 3, 2009 at 1:06 PM, Geofrey Rainey
> > > >> > <Geofrey.Rainey at tvnz.co.nz>wrote:
> > > >> >
> > > >> > > Also, what about the outut of the "sar" command without any
> > > >> arguments?
> > > >> > >
> > > >> > > -----Original Message-----
> > > >> > > From: redhat-list-bounces at redhat.com
> > > >> > > [mailto:redhat-list-bounces at redhat.com] On Behalf Of
> > Ramakrishnan
> > > >> > > Seshadhri
> > > >> > > Sent: Sunday, 3 May 2009 9:01 p.m.
> > > >> > > To: General Red Hat Linux discussion list
> > > >> > > Subject: Re: Reg : RHEL 5.0 Installatio
> > > >> > >
> > > >> > > Hi,
> > > >> > >
> > > >> > >
> > > >> > > Thanks for the response : Here is my output of "sar -r"
> command
> > > >> > >
> > > >> > > Linux 2.6.18-53.el5PAE (dbbld) 05/03/2009
> > > >> > >
> > > >> > > 09:50:01 AM kbmemfree kbmemused %memused kbbuffers kbcached
> > > >> > kbswpfree
> > > >> > > kbswpused %swpused kbswpcad
> > > >> > > 10:00:01 AM 7400868 910644 10.96 141164 590936
> > > >> > > 10388412 0 0.00 0
> > > >> > > 10:10:01 AM 7394136 917376 11.04 142056 597464
> > > >> > > 10388412 0 0.00 0
> > > >> > > 10:20:01 AM 7394756 916756 11.03 142260 597464
> > > >> > > 10388412 0 0.00 0
> > > >> > > 10:30:01 AM 7394632 916880 11.03 142420 597468
> > > >> > > 10388412 0 0.00 0
> > > >> > > 10:40:01 AM 7394012 917500 11.04 142668 597488
> > > >> > > 10388412 0 0.00 0
> > > >> > > Average: 7395681 915831 11.02 142114 596164
> > > >> > > 10388412 0 0.00 0
> > > >> > >
> > > >> > > 10:46:40 AM LINUX RESTART
> > > >> > >
> > > >> > > 10:54:21 AM LINUX RESTART
> > > >> > >
> > > >> > > 11:00:01 AM kbmemfree kbmemused %memused kbbuffers kbcached
> > > >> > kbswpfree
> > > >> > > kbswpused %swpused kbswpcad
> > > >> > > 11:10:01 AM 7781624 529888 6.38 97864 300800
> > > >> > > 10388412 0 0.00 0
> > > >> > > Average: 7781624 529888 6.38 97864 300800
> > > >> > > 10388412 0 0.00 0
> > > >> > >
> > > >> > > 11:22:15 AM LINUX RESTART
> > > >> > >
> > > >> > > 11:38:03 AM LINUX RESTART
> > > >> > >
> > > >> > > 11:40:01 AM kbmemfree kbmemused %memused kbbuffers kbcached
> > > >> > kbswpfree
> > > >> > > kbswpused %swpused kbswpcad
> > > >> > > 11:50:01 AM 7780860 530652 6.38 89332 301896
> > > >> > > 10388412 0 0.00 0
> > > >> > > Average: 7780860 530652 6.38 89332 301896
> > > >> > > 10388412 0 0.00 0
> > > >> > >
> > > >> > > 11:59:06 AM LINUX RESTART
> > > >> > >
> > > >> > > 12:00:02 PM kbmemfree kbmemused %memused kbbuffers kbcached
> > > >> > kbswpfree
> > > >> > > kbswpused %swpused kbswpcad
> > > >> > > 12:10:01 PM 7728928 582584 7.01 135368 303512
> > > >> > > 10388412 0 0.00 0
> > > >> > > 12:20:01 PM 7729052 582460 7.01 135484 303516
> > > >> > > 10388412 0 0.00 0
> > > >> > > 12:30:01 PM 7728692 582820 7.01 135904 303884
> > > >> > > 10388412 0 0.00 0
> > > >> > > 12:40:01 PM 286120 8025392 96.56 121840 7634772
> > > >> > > 10388412 0 0.00 0
> > > >> > > 12:50:01 PM 289640 8021872 96.52 50696 7736596
> > > >> > > 10388408 4 0.00 4
> > > >> > > Average: 4752486 3559026 42.82 115858 3256456
> > > >> > > 10388411 1 0.00 1
> > > >> > >
> > > >> > >
> > > >> > > I cant see any swap usage.
> > > >> > >
> > > >> > > Ram
> > > >> > >
> > > >> > > On Sun, May 3, 2009 at 12:57 PM, Geofrey Rainey
> > > >> > > <Geofrey.Rainey at tvnz.co.nz>wrote:
> > > >> > >
> > > >> > > > Try the following:
> > > >> > > >
> > > >> > > > # sar -r (look at how much swap is being used)
> > > >> > > >
> > > >> > > > # sar (is the i/o wait column high?)
> > > >> > > >
> > > >> > > >
> > > >> > > > -----Original Message-----
> > > >> > > > From: redhat-list-bounces at redhat.com
> > > >> > > > [mailto:redhat-list-bounces at redhat.com] On Behalf Of
> > > Ramakrishnan
> > > >> > > > Seshadhri
> > > >> > > > Sent: Sunday, 3 May 2009 7:41 p.m.
> > > >> > > > To: General Red Hat Linux discussion list
> > > >> > > > Subject: Reg : RHEL 5.0 Installatio
> > > >> > > >
> > > >> > > > Hi,
> > > >> > > >
> > > >> > > > I have installed RHEL 5 on one of the servers and once the
> > > server
> > > >> > > boots
> > > >> > > > up
> > > >> > > > the load average is constantly at 2.8 and server is slow.
> > > >> > > >
> > > >> > > > Server is IBM blade by make .
> > > >> > > >
> > > >> > > > 8 GB RAM
> > > >> > > >
> > > >> > > >
> > > >> > > > top command does not show any CPR intensive tasks.
> > > >> > > >
> > > >> > > > please let me know how to find out what is occupying CPU
> > > >> > > >
> > > >> > > >
> > > >> > > > Ram
> > > >> > > > --
> > > >> > > > redhat-list mailing list
> > > >> > > > unsubscribe
> > > >> > mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > > >> > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > >> > > > ==========================================================
> > > >> > > > For more information on the Television New Zealand Group,
> > visit
> > > us
> > > >> > > > online at tvnz.co.nz
> > > >> > > > ==========================================================
> > > >> > > > CAUTION: This e-mail and any attachment(s) contain
> > information
> > > >> that
> > > >> > > > is intended to be read only by the named recipient(s).
> This
> > > >> > > information
> > > >> > > > is not to be used or stored by any other person and/or
> > > >> organisation.
> > > >> > > >
> > > >> > > >
> > > >> > > > --
> > > >> > > > redhat-list mailing list
> > > >> > > > unsubscribe
> > > >> > mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > > >> > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > >> > > >
> > > >> > > --
> > > >> > > redhat-list mailing list
> > > >> > > unsubscribe
> > > >> mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > > >> > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > >> > > ==========================================================
> > > >> > > For more information on the Television New Zealand Group,
> visit
> > > us
> > > >> > > online at tvnz.co.nz
> > > >> > > ==========================================================
> > > >> > > CAUTION: This e-mail and any attachment(s) contain
> information
> > > that
> > > >> > > is intended to be read only by the named recipient(s). This
> > > >> > information
> > > >> > > is not to be used or stored by any other person and/or
> > > organisation.
> > > >> > >
> > > >> > >
> > > >> > > --
> > > >> > > redhat-list mailing list
> > > >> > > unsubscribe
> > > >> mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > > >> > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > >> > >
> > > >> > --
> > > >> > redhat-list mailing list
> > > >> > unsubscribe
> > > mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > > >> > https://www.redhat.com/mailman/listinfo/redhat-list
> > > >> > ==================================================
> > > >> > ========
> > > >> > For more information on the Television New Zealand Group, visit
> > us
> > > >> > online at tvnz.co.nz
> > > >> > ==========================================================
> > > >> > CAUTION: This e-mail and any attachment(s) contain information
> > > that
> > > >> > is intended to be read only by the named recipient(s). This
> > > >> information
> > > >> > is not to be used or stored by any other person and/or
> > > organisation.
> > > >> >
> > > >> >
> > > >> > --
> > > >> > redhat-list mailing list
> > > >> > unsubscribe
> > > mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > > >> > https://www.redhat.com/mailman/listinfo/redhat-list
> > > >> >
> > > >> --
> > > >> redhat-list mailing list
> > > >> unsubscribe
> > mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > > >> https://www.redhat.com/mailman/listinfo/redhat-list
> > > >> ==========================================================
> > > >> For more information on the Television New Zealand Group, visit
> us
> > > >> online at tvnz.co.nz
> > > >> ==========================================================
> > > >> CAUTION: This e-mail and any attachment(s) contain information
> > that
> > > >> is intended to be read only by the named recipient(s). This
> > > information
> > > >> is not to be used or stored by any other person and/or
> > organisation.
> > > >>
> > > >>
> > > >> --
> > > >> redhat-list mailing list
> > > >> unsubscribe
> > mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > > >> https://www.redhat.com/mailman/listinfo/redhat-list
> > > >>
> > > >
> > > >
> > > --
> > > redhat-list mailing list
> > > unsubscribe
> mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > ==========================================================
> > > For more information on the Television New Zealand Group, visit us
> > > online at tvnz.co.nz
> > > ==========================================================
> > > CAUTION: This e-mail and any attachment(s) contain information that
> > > is intended to be read only by the named recipient(s). This
> > information
> > > is not to be used or stored by any other person and/or organisation.
> > >
> > >
> > > --
> > > redhat-list mailing list
> > > unsubscribe
> mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > > https://www.redhat.com/mailman/listinfo/redhat-list
> > >
> > --
> > redhat-list mailing list
> > unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > https://www.redhat.com/mailman/listinfo/redhat-list
> > ==========================================================
> > For more information on the Television New Zealand Group, visit us
> > online at tvnz.co.nz
> > ==========================================================
> > CAUTION: This e-mail and any attachment(s) contain information that
> > is intended to be read only by the named recipient(s). This
> information
> > is not to be used or stored by any other person and/or organisation.
> >
> >
> > --
> > redhat-list mailing list
> > unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> > https://www.redhat.com/mailman/listinfo/redhat-list
> >
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
> ==========================================================
> For more information on the Television New Zealand Group, visit us
> online at tvnz.co.nz
> ==========================================================
> CAUTION: This e-mail and any attachment(s) contain information that
> is intended to be read only by the named recipient(s). This information
> is not to be used or stored by any other person and/or organisation.
>
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
More information about the redhat-list
mailing list