[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: disk partitions on that aren't recognized by mkfs + parted



fuser -v /dev/sdi1
[root m3science ~]# lvdisplay
  --- Logical volume ---
  LV Name                /dev/vg1/lv1
  VG Name                vg1
  LV UUID                TzLAvI-cXKp-kevB-cIwi-d900-7ljt-KB89Tl
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                7.20 TB
  Current LE             1887437
  Segments               4
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     256
  Block device           253:0

[root m3science ~]# mdadm --stop /dev/sdi1
mdadm: /dev/sdi1 does not appear to be an md device

The lvdisplay shows the m3team3 logical volume which includes sdd1, sde1,
sdf1 and sdg1


On Thu, May 5, 2011 at 4:43 PM, raj sourabh <rajsourabh1 gmail com> wrote:

> Hi,
>
> The below output indicates;
>
>  Disk is in use by some process/software.. Please make sure this by
> running:
>   #fuser -v /dev/sdi1
>   (This should not display anything if disk is not in use)
>
>  Disk could be part of RAID or volume group
>      Try this and check for device /dev/sdi1
>      # lvdisplay
>
>      and finally, The following should disply something if it was part of
> any RAID
>      # mdadm --stop /dev/sdi1
>
>
> Regards,
>
> Raj
>
>
>
>
>
>
>
> On Thu, May 5, 2011 at 10:53 PM, Doll, Margaret Ann <
> margaret_doll brown edu
> > wrote:
>
> > fdisk /dev/sdi
> >
> > The number of cylinders for this disk is set to 243201.
> > There is nothing wrong with that, but this is larger than 1024,
> > and could in certain setups cause problems with:
> > 1) software that runs at boot time (e.g., old versions of LILO)
> > 2) booting and partitioning software from other OSs
> >   (e.g., DOS FDISK, OS/2 FDISK)
> >
> > Command (m for help): p
> >
> > Disk /dev/sdi: 2000.3 GB, 2000398934016 bytes
> > 255 heads, 63 sectors/track, 243201 cylinders
> > Units = cylinders of 16065 * 512 = 8225280 bytes
> >
> >   Device Boot      Start         End      Blocks   Id  System
> > /dev/sdi1               1      243201  1953512001   83  Linux
> >
> > Command (m for help): d
> > Selected partition 1
> >
> > Command (m for help): p
> >
> > Disk /dev/sdi: 2000.3 GB, 2000398934016 bytes
> > 255 heads, 63 sectors/track, 243201 cylinders
> > Units = cylinders of 16065 * 512 = 8225280 bytes
> >
> >   Device Boot      Start         End      Blocks   Id  System
> >
> > Command (m for help): n
> > Command action
> >   e   extended
> >   p   primary partition (1-4)
> > p
> > Partition number (1-4): 1
> > First cylinder (1-243201, default 1):
> > Using default value 1
> > Last cylinder or +size or +sizeM or +sizeK (1-243201, default 243201):
> > Using default value 243201
> >
> > Command (m for help): w
> > The partition table has been altered!
> >
> > Calling ioctl() to re-read partition table.
> > Syncing disks.
> > [root m3science ~]# partprobe
> > Warning: Unable to open /dev/hda read-write (Read-only file system).
> > /dev/hda has been opened read-only.
> > Warning: /dev/sdh contains GPT signatures, indicating that it has a GPT
> > table.  However, it does not have a valid fake msdos partition table, as
> it
> > should.  Perhaps it was corrupted -- possibly by a program that doesn't
> > understand GPT partition tables.  Or perhaps you deleted the GPT table,
> and
> > are now using an msdos partition table.  Is this a GPT partition table?
> > [root m3science ~]# mke2fs -j /dev/sdi1
> > mke2fs 1.39 (29-May-2006)
> > /dev/sdi1 is apparently in use by the system; will not make a filesystem
> > here!
> >
> >
> >  On Thu, May 5, 2011 at 2:23 PM, raj sourabh <rajsourabh1 gmail com>
> > wrote:
> >
> > > Ok, so things look fine till here when you have created partitions
> > > sdh1,sdi1,sdj1,sdk1.. even after running partprobe if you are getting
> the
> > > same here then try the follwing;
> > >
> > > # delete one of the partition through fdisk eg.sdi1
> > > # after deletion check eg. # fdisk /dev/sdi and then list the
> partitions
> > > (You should not see anything)
> > > # Recreate the partition as primary
> > > #  Partprobe
> > > # and then try mke2fs -j /dev/sdi1
> > >
> > > Hope this should give some useful results.
> > >
> > > Regards,
> > >
> > > Raj
> > >
> > >
> > >
> > > On Thu, May 5, 2011 at 8:05 PM, Doll, Margaret Ann
> > > <margaret_doll brown edu>wrote:
> > >
> > > > On Thu, May 5, 2011 at 11:33 AM, raj sourabh <rajsourabh1 gmail com>
> > > > wrote:
> > > >
> > > > > Hi,
> > > > >
> > > > > Please provide the output of following:
> > > > >
> > > > > #fdisk -l
> > > > >
> > > >
> > > > for the four disks in question
> > > >
> > > > WARNING: GPT (GUID Partition Table) detected on '/dev/sdh'! The util
> > > fdisk
> > > > doesn't support GPT. Use GNU Parted.
> > > >
> > > >
> > > > Disk /dev/sdh: 2000.3 GB, 2000398934016 bytes
> > > > 255 heads, 63 sectors/track, 243201 cylinders
> > > > Units = cylinders of 16065 * 512 = 8225280 bytes
> > > >
> > > >   Device Boot      Start         End      Blocks   Id  System
> > > > /dev/sdh1               1      243201  1953512001   83  Linux
> > > >
> > > > Disk /dev/sdi: 2000.3 GB, 2000398934016 bytes
> > > > 255 heads, 63 sectors/track, 243201 cylinders
> > > > Units = cylinders of 16065 * 512 = 8225280 bytes
> > > >
> > > >   Device Boot      Start         End      Blocks   Id  System
> > > > /dev/sdi1               1      243201  1953512001   83  Linux
> > > >
> > > > Disk /dev/sdj: 2000.3 GB, 2000398934016 bytes
> > > > 255 heads, 63 sectors/track, 243201 cylinders
> > > > Units = cylinders of 16065 * 512 = 8225280 bytes
> > > >
> > > >   Device Boot      Start         End      Blocks   Id  System
> > > > /dev/sdj1               1      243201  1953512001   83  Linux
> > > >
> > > > Disk /dev/sdk: 2000.3 GB, 2000398934016 bytes
> > > > 255 heads, 63 sectors/track, 243201 cylinders
> > > > Units = cylinders of 16065 * 512 = 8225280 bytes
> > > >
> > > >   Device Boot      Start         End      Blocks   Id  System
> > > > /dev/sdk1               1      243201  1953512001   83  Linux
> > > >
> > > >
> > > > > #df -h
> > > > >
> > > >
> > > > Filesystem            Size  Used Avail Use% Mounted on
> > > > /dev/sda3             1.6G  982M  489M  67% /
> > > > tmpfs                 1.8G     0  1.8G   0% /dev/shm
> > > > /dev/sda10            883G  449G  389G  54% /home
> > > > /dev/sdb1             4.1G  569M  3.4G  15% /var
> > > > /dev/sdb2             913G  245G  622G  29% /home2
> > > > /dev/sda9             730M  519M  173M  76% /oldvar
> > > > /dev/sda8             1.1G   34M  976M   4% /tmp
> > > > /dev/sda6             2.1G   72M  2.0G   4% /opt
> > > > /dev/sda2             8.1G  3.6G  4.2G  46% /usr
> > > > /dev/sda5             3.1G  2.3G  671M  78% /usr/local
> > > > /dev/sda1             1.1G  120M  889M  12% /boot
> > > > /dev/sdc               12T   12T  183G  99% /m3team
> > > > /dev/mapper/vg1-lv1   7.1T  1.6T  5.2T  24% /m3team3
> > > > quahog2:/LVM2/crism13
> > > >                      4.9T  191G  4.5T   5% /m3team2
> > > > porter2:/m3_usb1      1.8T   96K  1.7T   1% /m3_usb1
> > > > porter2:/m3_usb2      1.8T  274G  1.5T  16% /m3_usb2
> > > > none                  1.8G  104K  1.8G   1% /var/lib/xenstored
> > > >
> > > >
> > > > eight disks were purchased and added to the system as the same time.
>  I
> > > > successfully created a log volume group out of the first four; they
> are
> > > > mounted on /m3team3.
> > > >
> > > > I used parted to create a GPT label on the disks.  Then I used fdisk
> to
> > > > create one partition taking up all the space on the disk.  I then
> used
> > > > "mkfs
> > > > -t ext3 /dev/sdg1 (etc.) on all the partitions before I used
> pvcreate,
> > > > vgcreate and lgcreate.
> > > >
> > > > The process worked on the first four disks.
> > > >
> > > > Thanks for your help
> > > >
> > > > >
> > > > > Regards,
> > > > >
> > > > > Raj
> > > > >
> > > > > On Thu, May 5, 2011 at 5:00 PM, Doll, Margaret Ann
> > > > > <margaret_doll brown edu>wrote:
> > > > >
> > > > > > I get the same error with mk2efs -j /dev/sdi1
> > > > > >
> > > > > > mke2fs 1.39 (29-May-2006)
> > > > > > /dev/sdi1 is apparently in use by the system; will not make a
> > > > filesystem
> > > > > > here!
> > > > > >
> > > > > >
> > > > > >  On Thu, May 5, 2011 at 8:50 AM, raj sourabh <
> > rajsourabh1 gmail com>
> > > > > > wrote:
> > > > > >
> > > > > > > Hi,
> > > > > > >
> > > > > > > Did you try using fdisk for partition? and the use partprobe.
> > > > > > >
> > > > > > > eg. #fdisk /dev/sdi
> > > > > > >     # partprobe
> > > > > > >     #mke2fs -j /dev/sdiX
> > > > > > >
> > > > > > > I hope this would help.
> > > > > > >
> > > > > > > Regards,
> > > > > > >
> > > > > > > Raj
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On Thu, May 5, 2011 at 4:29 PM, Doll, Margaret Ann
> > > > > > > <margaret_doll brown edu>wrote:
> > > > > > >
> > > > > > > > In this particular case, I have rebooted the system many
> times
> > > and
> > > > am
> > > > > > > > unable
> > > > > > > > to get mkfs to work.  The disk partitions are also not on the
> > > same
> > > > > disk
> > > > > > > as
> > > > > > > > /.  How do I get the disk partitions to work with mkfs?
> > > > > > > >
> > > > > > > > On Thu, May 5, 2011 at 8:25 AM, Corey Kovacs <
> > > > corey kovacs gmail com
> > > > > >
> > > > > > > > wrote:
> > > > > > > >
> > > > > > > > > Important to note
> > > > > > > > >
> > > > > > > > > 1. It's not often / is repartitioned.
> > > > > > > > > 2. This isn't a problem unique to RHEL.
> > > > > > > > >
> > > > > > > > > C
> > > > > > > > >
> > > > > > > > > Sent from my iPod
> > > > > > > > >
> > > > > > > > > On May 5, 2011, at 8:14 AM, "Marti, Robert" <
> RJM002 shsu edu
> > >
> > > > > wrote:
> > > > > > > > >
> > > > > > > > > > A reboot is required if you change partitions on the same
> > > disk
> > > > > that
> > > > > > > > > houses /.
> > > > > > > > > >
> > > > > > > > > > On May 5, 2011, at 6:41, "Stainforth, Matthew (SD/DS)" <
> > > > > > > > > Matthew Stainforth gnb ca> wrote:
> > > > > > > > > >
> > > > > > > > > >>> the default behavior for RHEL6 but I am not sure when
> or
> > IF
> > > > it
> > > > > > > > > >>> actually hit RHEL5. Sounds like it might have. In RHEL6
> a
> > > > > reboot
> > > > > > is
> > > > > > > > > >>> simply a requirement, full stop.
> > > > > > > > > >>
> > > > > > > > > >> In RHEL6 a reboot is required between repartitioning and
> > > > > mkfs'ing?
> > > > > > > >  What
> > > > > > > > > a sad thing if true.
> > > > > > > > > >>
> > > > > > > > > >> --
> > > > > > > > > >> redhat-list mailing list
> > > > > > > > > >> unsubscribe mailto:redhat-list-request redhat com
> > > > > > > ?subject=unsubscribe
> > > > > > > > > >> https://www.redhat.com/mailman/listinfo/redhat-list
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > redhat-list mailing list
> > > > > > > > > > unsubscribe mailto:redhat-list-request redhat com
> > > > > > > ?subject=unsubscribe
> > > > > > > > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > redhat-list mailing list
> > > > > > > > > unsubscribe mailto:redhat-list-request redhat com
> > > > > > ?subject=unsubscribe
> > > > > > > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > > > > > > >
> > > > > > > > --
> > > > > > > > redhat-list mailing list
> > > > > > > > unsubscribe mailto:redhat-list-request redhat com
> > > > > ?subject=unsubscribe
> > > > > > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > > > > > >
> > > > > > > --
> > > > > > > redhat-list mailing list
> > > > > > > unsubscribe mailto:redhat-list-request redhat com
> > > > ?subject=unsubscribe
> > > > > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > > > > >
> > > > > > --
> > > > > > redhat-list mailing list
> > > > > > unsubscribe mailto:redhat-list-request redhat com
> > > ?subject=unsubscribe
> > > > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > > > >
> > > > > --
> > > > > redhat-list mailing list
> > > > > unsubscribe mailto:redhat-list-request redhat com
> > ?subject=unsubscribe
> > > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > > >
> > > > --
> > > > redhat-list mailing list
> > > > unsubscribe mailto:redhat-list-request redhat com
> ?subject=unsubscribe
> > > > https://www.redhat.com/mailman/listinfo/redhat-list
> > > >
> > > --
> > > redhat-list mailing list
> > > unsubscribe mailto:redhat-list-request redhat com?subject=unsubscribe
> > > https://www.redhat.com/mailman/listinfo/redhat-list
> > >
> > --
> > redhat-list mailing list
> > unsubscribe mailto:redhat-list-request redhat com?subject=unsubscribe
> > https://www.redhat.com/mailman/listinfo/redhat-list
> >
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request redhat com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]