[rhelv6-list] Opinions on multi-head
Jussi Silvennoinen
jussi_rhel6 at silvennoinen.net
Mon Jun 4 20:01:49 UTC 2012
>> > > > > three. It's the configuration I am running right now.
>> > > > > I wound up going with the ATI FirePro v4900 for triple head on
>> > > RHEL6.
>> > > > I am using the DVI port, and two DisplayPort to DVI cables to drive
>> > > > three monitors.
>> > > > > An interesting note... The AMD binary driver locked up the
>> > > > > machine.
>> > > > Using the native RHEL driver, all three screens work, and I get
>> > > > accelerated X and compiz works great.
>> > >
>> > > Out of curiosity, what kind of performance do you get? In something
>> > > rudimentary like glxgears.
>> >
>> > Sorry for the delay in answering, I was travelling all week. It's not
>> > spectacular, but certainly usable for my purposes. Like I said, I am
>> > not a gamer, all I wanted was compiz to work on three heads. I just got:
>> >
>> > [tcameron at case ~]$ glxgears
>> > Running synchronized to the vertical refresh. The framerate should be
>> > approximately the same as the monitor refresh rate.
>> > 298 frames in 5.0 seconds = 59.561 FPS
>> > 300 frames in 5.0 seconds = 59.903 FPS
>>
>> Hum, how about 'export vblank_mode=0 ; glxgears'? Gaming aside, 2500fps
>> from a Nvidia NVS290 wasn't enough to run compiz on a 3200x1200 dualhead
>> smoothly enóugh for my taste. 9000fps from a Quadro 600 did the trick.
>> Both using Nvidia's proprietary driver.
>
> I'm running at 4320x900, or one desktop across three 1440x900 screens. Compiz
> works just fine to my eye.
>
> To use the Quadro 600 for three monitors, I would have had to buy two of
> them, instead of the one V4900. Essentially that would double my cost, and
> add the hassle of proprietary drivers. Also, I MASSIVELY prefer to use OSS
> instead of closed source.
>
> Anyway, I ran your command, and I got an average of about 4000fps. Plenty
> snappy for my use.
>
> [tcameron at case Desktop]$ export vblank_mode=0 ; glxgears
> ATTENTION: default value of option vblank_mode overridden by environment.
> ATTENTION: default value of option vblank_mode overridden by environment.
> 17754 frames in 5.0 seconds = 3550.749 FPS
> 17699 frames in 5.0 seconds = 3539.472 FPS
Wonderful. Do you use xinerama?
I cannot get xinerama to work properly with any newish Nvidia driver and
RHEL6.2's X.org, window borders go AWOL.
--
Jussi
More information about the rhelv6-list
mailing list