Re: router using FC4

["LC" <listfedora gmail com>]

----- Original Message ----- 
From: "Bob Marcan" <bob marcan interstudio homeunix net>
To: "For users of Fedora Core releases" <fedora-list redhat com>
Sent: Wednesday, May 24, 2006 12:09 AM
Subject: Re: router using FC4


> LC wrote:
> > Hi,
> >
> > I am trying to make a router using a FC4. I have 2 NICs in the machine. 
> > Install FC4 using minimium. Eth0 is set to DHCP, connected to an ethernet 
> > modem and ETH1 has IP 192.168.1.1, netmask 255.255.255.0 connected to a 
> > switch. Installation was a success and rebooted the box. Clients machines 
> > are unable to ping 192.168.1.1. But when i unplug the modem and reboot, 
> > clients are ablt to ping 192.168.1.1. I realised if the box booted up 
> > both ETH0 and ETH1, clients are able to ping 192.168.1.1. But if i ifdown 
> > ETH0 and ifup ETH0, clients are able to get reply from 192.168.1.1.
> >
> > Can someone tell me what should I do?
> >
> > Best regards
>
> /etc/sysctl.conf:
>
> # Controls IP packet forwarding
> net.ipv4.ip_forward = 0

This is my /etc/sysctl.conf

# Kernel sysctl configuration file for Red Hat Linux
#
# For binary values, 0 is disabled, 1 is enabled.  See sysctl(8) and
# sysctl.conf(5) for more details.

# Controls IP packet forwarding
net.ipv4.ip_forward = 0

# Controls source route verification
net.ipv4.conf.default.rp_filter = 1

# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0

# Controls whether core dumps will append the PID to the core filename.
# Useful for debugging multi-threaded applications.
kernel.core_uses_pid = 1