[rhn-users] SMB and RH7 / RH9

[Dan Wittenberg]

mii-tool <interface>  
or
ethtool <interface>

depending on the card/driver one of these should work.

Dan


On Sat, 2004-06-26 at 02:24, mnow wrote:
> How might I check speed/duplex?
> 
> Thanks,
> 
> Mark
> 
> 
> ----- Original Message ----- 
> From: "Daniel Wittenberg" <daniel-wittenberg at uiowa.edu>
> To: "Red Hat Network Users List" <rhn-users at redhat.com>
> Sent: Monday, June 07, 2004 1:22 AM
> Subject: Re: [rhn-users] SMB and RH7 / RH9
> 
> 
> > Probably first thing to check is make sure your speed/duplex is set
> > correctly.  Also run vmstat 5 and make sure cpu is good as well as
> > paging.
> > 
> > Dan
> > 
> > On Sun, 2004-06-06 at 23:02, mnow wrote:
> > > I am using two different computers, one with RH7 and the other with
> > > RH9.
> > > The RH7 machine seems to be very slow at accessing the other network
> > > computers while RH9 sails along just fine.
> > > Any tips on speeding up the RH7 machine for network access?
> > > I need to keep the RH7 machine to run Interchange because of to many
> > > snafoo's with RH9's use of threads.
> > >  
> > >  
> > > Thanks,
> > >  
> > > Mark
> > >  
> > > 
> > > ______________________________________________________________________
> > > _______________________________________________
> > > rhn-users mailing list
> > > rhn-users at redhat.com
> > > https://www.redhat.com/mailman/listinfo/rhn-users
> > 
> > 
> > 
> > 
> 
> 
> _______________________________________________
> rhn-users mailing list
> rhn-users at redhat.com
> https://www.redhat.com/mailman/listinfo/rhn-users
-- 
===========================
Daniel Wittenberg
Senior Unix Admin
University of Iowa - ITS