[rhn-users] Problem with HP DL380 G4 and MSA1000 Storage

[Kay Winterhager]

Hi,

I got the information that I don't need the Secure Path when I use the
newest driver for the HBA QLogic2x00 Chip.
The functionality should be integrated in this new driver....


regards

Kay




                                                                           
             csu4 at fedex.com                                                
             Sent by:                                                      
             rhn-users-bounces                                          To 
             @redhat.com               Red Hat Network Users List          
                                       <rhn-users at redhat.com>              
                                                                        cc 
             30.06.2005 03:08                                              
                                                                   Subject 
                                       Re: [rhn-users] Problem with HP     
             Please respond to         DL380 G4 and MSA1000 Storage        
              Red Hat Network                                              
                Users List                                                 
             <rhn-users at redhat                                             
                   .com>                                                   
                                                                           
                                                                           





Have you configured Secure Path from the MSA1000 level
during the setup stage? If you configured them then it
should present you only the mirrored logical drives, e.g.
sda, sda, sdc, etc. You should not see other disks as
they are not presented to you.



Rgds,


SCHYU









                    Kay Winterhager

                    <Kay.Winterhager at lsg.vander       To:
rhn-users at redhat.com
                    lande.com>                        cc:

                    Sent by:                          Subject:
[rhn-users] Problem with HP DL380 G4 and MSA1000
                    rhn-users-bounces at redhat.co        Storage

                    m



                    06/29/2005 10:53 PM

                    Please respond to Red Hat

                    Network Users List






I have a problem with a HP DL380 G4 and a MSA1000 Storage.
I use redundant HP FCA 2214 HBA with QLogic23xx Chip for the connection to
the storage.

I have 6 disk in the storage, 3 logical drives (RAID 1)

During the boot of the server I get many errors for sda, sdb and sdc:
"Buffer I/O error on device sda, logical block 0..15" etc.

With FDISK and Webmin Partition Manager I can configure the devices sdd,
sde, sdf.

What is the problem with sda, sdb and sdc and what have I to do, to use
sda, sdb and sdc?


Thanks
Kay

_______________________________________________
rhn-users mailing list
rhn-users at redhat.com
https://www.redhat.com/mailman/listinfo/rhn-users



_______________________________________________
rhn-users mailing list
rhn-users at redhat.com
https://www.redhat.com/mailman/listinfo/rhn-users