[rhn-users]Fecora Core % booting problem

[Sekhar T N]

Hi,
I have installed Fedora core 5 in Toshiba tecra s2  laptops, after
installation linux OS hangs saying "udev starting".
Please let me know how to resolv this.

Regards,
Sekhar
----- Original Message -----
From: "Corne Beerse" <cbeerse at gmail.com>
To: "Red Hat Network Users List" <rhn-users at redhat.com>
Sent: Monday, August 21, 2006 6:12 PM
Subject: Re: [rhn-users] Gigabit transfer speeds


> Dan Hunter wrote:
>
> > I regularly move large files from a windows XP machine to a Fedora
> > Core 5 machine.
> > To avoid bothering other network users, I purchased two Linksys EG1032
> > gigabit ether net cards.
> > The cards have been installed.  a direct PC to PC gigabit cross over
> > cable connects them.
> > A separate set of IP address have been set up.
> > I can verify that data is being transfered over the gigabit cable with
> > windows task manager.
> >
> > Transfers over the 10/100 link show up at 82 or 83 percent - about 80
> > Mbps.
> > Transfers over the gigabit link show up at 20 to 26 percent - about
> > 230 Mbps.
> >
> > What do I have set up wrong?
> >
> >
> Your expectations are to high. If you have about 20% utilisation with a
> Gbit nic, I'd say you are doing verry nice.
>
> With the move to gigabit networking, the nic is no longer the
> bottleneck. If you move data from disk on one machine or to disk on an
> other, the disk-controllers, disk interfaces or even the actual disks
> are most likely the bottlenecks. Then, the disk does not need to be the
> bottleneck. Think about the speed of internal busses and for which they
> are used while you are dumping data...
>
>
> CBee
>
> _______________________________________________
> rhn-users mailing list
> rhn-users at redhat.com
> https://www.redhat.com/mailman/listinfo/rhn-users
>

-------------- next part --------------
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message.Global Edge Software Ltd has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Global Edge Software Ltd reserves the right to monitor and review the content of all messages sent to or from this e-mail address