[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Help ALL-IN-WONDER 128 PRO (agp) with X



Try this site www.linux3d.net/ati/sections/rage128_howto/index.shtml
notice the part in Section "Device" where is says "Chipid 0x5246" In order
to get my card working with x right i went though the Xconfigurator and
then inserted  "Chipid 0x5246" in the XF86Config-4 file in the same
spot it is in the howto and started x
and then every thing worked fine.

Hope this helps

 ************************************************************************
 *									*
 * Edward Konetzko							*
 * Konetzed mnstate edu							*
 *									*
 ************************************************************************

On Mon, 23 Jul 2001, Bryan Fields wrote:

> Hi,
>
> I have been trying to figure out why this card will not work with X for me.
> I have tried to use Xconfigurator, and editing the XF86Config(-4) file, but
> have not had any success.
>
> My hardware is a Intel P4 1750 MHz, Asus P4T, 256 Mb of ram, Adeptec 29160
> SCSI 160 card, SB live card, netgear FA311 10/100 NIC, IBM 18 Gb scsi HD,
> yamaha scsi CD-Rom, and a Gateway VX900. (most of this probably does not
> pertain, but rather to much info than not enough)
>
> I have Fresh install of Redhat 7.1 with all the updates that RH provides. my
> kernel is 2.4.3-12, Xfree86 Version 4.0.3, and the kernel has the agp, r128
> etc compiled in.
>
> The graphical installer worked ok, but the video card did not get detected.
>
> I used Xconfigurator and it did not detect it, but it did detect the
> monitor!  I selected the card from the list, and it still would not work.
>
> I have noticed that there is a 4.1.0 version of Xfree is out now, but there
> is no rpm available.  If some one can say if this works, i will d/l it and
> compile it.
>
> Please help, I have a lot of computer here and need to get X runing ASAP.
>
>
> Here is the output of SuperProbe:
>
> First video: Super-VGA
>         Chipset: ATI (chipset unknown) (Port Probed)
>                 Signature data: 3f3f0000 (please report)
>         Memory:  0 Kbytes
>         RAMDAC:  Generic 8-bit pseudo-color DAC
>                  (with 6-bit wide lookup tables (or in 6-bit mode))
>
>
> here is what lspci -v outputs for the Video Card:
>
> 01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5446
> (prog-if 00 [VGA])
>         Subsystem: ATI Technologies Inc: Unknown device 0028
>         Flags: bus master, VGA palette snoop, stepping, 66Mhz, medium devsel,
> latency 64, IRQ 11
>         Memory at f8000000 (32-bit, prefetchable) [size=64M]
>         I/O ports at d800 [size=256]
>         Memory at f7000000 (32-bit, non-prefetchable) [size=16K]
>         Expansion ROM at f7fe0000 [disabled] [size=128K]
>         Capabilities: [50] AGP version 2.0
>         Capabilities: [5c] Power Management version 2
>
> here is the out put from X:
>
> XFree86 Version 4.0.3
> / X Window System
> (protocol Version 11, revision 0, vendor release 6400)
> Release Date: 16 March 2001
>         If the server is older than 6-12 months, or if your card is
>         newer than the above date, look for a newer version before
>         reporting problems.  (See http://www.XFree86.Org/FAQ)
> Operating System: Linux 2.2.17-8smp i686 [ELF]
> Module Loader present
> (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jul 23 21:03:40 2001
> (==) Using config file: "/etc/X11/XF86Config-4"
> Markers: (--) probed, (**) from config file, (==) default setting,
>          (++) from command line, (!!) notice, (II) informational,
>          (WW) warning, (EE) error, (??) unknown.
> (==) ServerLayout "XFree86 Configured"
> (**) |-->Screen "Screen0" (0)
> (**) |   |-->Monitor "GATEWAY VX90"
> (**) |   |-->Device "My Video Card"
> (**) |-->Input Device "Mouse0"
> (**) |-->Input Device "Keyboard0"
> (**) XKB: layout: "us"
> (**) FontPath set to "unix/:7100"
> (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (--) using VT number 7
>
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
>         compiled for 4.0.3, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
>         compiled for 4.0.3, module version = 0.1.0
> (II) Loading /usr/X11R6/lib/modules/libscanpci.a
> (II) Module scanpci: vendor="The XFree86 Project"
>         compiled for 4.0.3, module version = 0.1.0
> (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> (--) PCI:*(1:0:0) ATI unknown chipset (0x5446) rev 0, Mem @ 0xf8000000/26,
> 0xf7000000/14, I/O @ 0xd800/8
> (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="The XFree86 Project"
>         compiled for 4.0.3, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
> (II) Module GLcore: vendor="The XFree86 Project"
>         compiled for 4.0.3, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
> (II) Module dri: vendor="The XFree86 Project"
>         compiled for 4.0.3, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
> (II) Module drm: vendor="The XFree86 Project"
>         compiled for 4.0.3, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
> (II) Module glx: vendor="The XFree86 Project"
>         compiled for 4.0.3, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="The XFree86 Project"
>         compiled for 4.0.3, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
> (II) Module v4l: vendor="The XFree86 Project"
>         compiled for 4.0.3, module version = 0.0.1
> (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
> (II) Module r128: vendor="The XFree86 Project"
>         compiled for 4.0.3, module version = 4.0.1
> (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
> (II) Module ati: vendor="The XFree86 Project"
>         compiled for 4.0.3, module version = 6.2.3
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
>         compiled for 4.0.3, module version = 1.0.0
> (II) v4l driver for Video4Linux
> (II) ATI: ATI driver (version 6.2.3) for chipsets: ati, ativga
> (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
>         ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
>         ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (AGP),
>         ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
>         ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
>         ATI Rage 128 Mobility ML (AGP)
> (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
>         ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP)
> (--) Assigning device section with no busID to primary device
> (EE) No devices detected.
>
> Fatal server error:
> no screens found
>
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages.
> This can be found in the log file "/var/log/XFree86.0.log".
> Please report problems to xfree86 xfree86 org 
>
> XIO:  fatal IO error 104 (Connection reset by peer) on X server ":0.0"
>       after 0 requests (0 known processed) with 0 events remaining.
>
> here is the XF86Config-4:
> # XFree86 4.0 configuration generated by Xconfigurator
>
> Section "ServerLayout"
>         Identifier "XFree86 Configured"
>         Screen      0  "Screen0" 0 0
>         InputDevice    "Mouse0" "CorePointer"
>         InputDevice    "Keyboard0" "CoreKeyboard"
> EndSection
>
> # By default, Red Hat Linux 6.0 and later use xfs
>
> Section "Files"
>         FontPath "unix/:7100"
> EndSection
>
> # Module loading section
>
> Section "Module"
>         Load  "dbe"             # Double-buffering
>         Load  "GLcore"          # OpenGL support
>         Load  "dri"             # Direct rendering infrastructure
>         Load  "glx"             # OpenGL X protocol interface
>         Load  "extmod"          # Misc. required extensions
>         Load  "v4l"             # Video4Linux
>         # Load  "pex5"          # PHIGS for X 3D environment (obsolete)
>         # Load  "record"        # X event recorder
>         # Load  "xie"           # X Image Extension (obsolete)
>         # You only need the following two modules if you do not use xfs.
>         # Load  "freetype"       # TrueType font handler
>         # Load  "type1"         # Adobe Type 1 font handler
> EndSection
>
> Section "InputDevice"
>         Identifier  "Keyboard0"
>         Driver      "keyboard"
>         Option      "XkbLayout" "us"
> EndSection
>
> Section "InputDevice"
>         Identifier  "Mouse0"
>         Driver      "mouse"
>         Option      "Device" "/dev/mouse"
>         Option      "Protocol" "IMPS/2"
>         Option      "Emulate3Buttons" "off"
>         Option      "ZAxisMapping" "4 5"
> EndSection
>
> Section "Monitor"
>         Identifier "GATEWAY VX90"
>         VendorName "Unknown"
>         ModelName  "Unknown"
>         HorizSync 30 - 95
>         VertRefresh 50 - 160
>         Option "dpms"
> EndSection
>
> Section "Device"
>         Identifier "My Video Card"
>         Driver "r128"
>         BoardName "Unknown"
> EndSection
>
> Section "Device"
>         Identifier "Linux Frame Buffer"
>         Driver "fbdev"
>         BoardName "Unknown"
> EndSection
>
> Section "Screen"
>         Identifier "Screen0"
>         Device "My Video Card"
>         Monitor "GATEWAY VX90"
>         DefaultDepth 16
>         Subsection "Display"
>                 Depth 24
>                 Modes "640x480"
>         EndSubSection
>         Subsection "Display"
>                 Depth 16
>                 Modes "640x480"
>         EndSubSection
>         Subsection "Display"
>                 Depth 8
>                 Modes "640x480"
>         EndSubSection
> EndSection
>
> Section "DRI"
>         Mode 0666
> EndSection
>
>
>
> --
> Bryan Fields, KB9MCI
> ____________________
> Insomnia isn't anything to lose sleep over.
>
>
>
> _______________________________________________
> Seawolf-list mailing list
> Seawolf-list redhat com
> https://listman.redhat.com/mailman/listinfo/seawolf-list
>





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]