[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

partport_pc module RH 7.1



Hi everybody,

I'm just trying to make a printer at the parallel port available on
a RH 7.1 machine. I'm a little bit confused as I am not sure what
is going wrong. I did the same thing on another machine where I had
no problems at all.

I would like to load the parport_pc module which has been
successfully compiled on that machine. I try

# insmod parport_pc
Using /lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_register_port_Rsmp_c9db9d7f
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_ieee1284_epp_read_data_Rsmp_cad75317
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_unregister_port_Rsmp_9e0067d6
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_ieee1284_ecp_write_data_Rsmp_0ebf0d51
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_parse_dmas_Rsmp_c976df0b
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_proc_register_Rsmp_dcdcf9a0
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_announce_port_Rsmp_bdf5eff0
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_proc_unregister_Rsmp_840872d1
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_ieee1284_interrupt_Rsmp_b3ec0c3b
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_ieee1284_write_compat_Rsmp_1052425e
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_ieee1284_ecp_read_data_Rsmp_d7098f6b
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_ieee1284_epp_write_data_Rsmp_d43d2520
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_ieee1284_epp_read_addr_Rsmp_7cec6f4f
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_ieee1284_read_byte_Rsmp_38800eb8
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_parse_irqs_Rsmp_fe3a2867
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_ieee1284_ecp_write_addr_Rsmp_6c4a2f4e
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_ieee1284_read_nibble_Rsmp_68fccc6f
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_ieee1284_epp_write_addr_Rsmp_b6c8073f
/lib/modules/2.4.9-6custom/kernel/drivers/parport/parport_pc.o:
unresolved symbol parport_enumerate_Rsmp_2aedfe75

I'm sure I did something wrong during compile time, but I can't see it.
The
kernel I'm using is 2.4.9-6 as you can easily figure out.

Any held would be appreciated.
Urte

-- 
-----------------------------------------------------------------------------------
                                                    Urte Fuerst
        _/_/      _/         _/_/_/         German Aerospace Center DLR
       _/  _/    _/         _/    _/   
      _/   _/   _/         _/    _/         Institute of Aeroelasticity
     _/    _/  _/         _/ _/_/                  Bunsenstrasse 10
    _/    _/  _/         _/_/                    D - 37073 Goettingen
   _/    _/  _/         _/  _/            Phone:  +49 (0)551 709 2432
  _/   _/   _/         _/    _/           Fax:    +49 (0)551 709 2862    
 _/_/_/    _/_/_/_/_/ _/      _/          e-mail: Urte Fuerst dlr de





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]