[Spacewalk-list] Jabber Issues after upgrading
Balint Szigeti
balint.szgt at gmail.com
Fri Dec 13 15:29:52 UTC 2013
I don't know by heart, but the openssl s_client support the pem format?
On 13/12/13 14:35, Net Warrior wrote:
> I use to test my cert, for example with openldap SSL like this:
> openssl s_client -connect localhost:636 -showcerts -state -CAfile
> cacert.pem and I can see all the cert information, in this case
> (spacewalk ) I get this error:
>
>
> [root at spacewalk jabberd]# openssl s_client -connect localhost:5347
> -showcerts -state -CAfile /etc/pki/spacewalk/jabberd/server.pem
> CONNECTED(00000003)
> SSL_connect:before/connect initialization
> SSL_connect:SSLv2/v3 write client hello A
> SSL_connect:error in SSLv2/v3 read server hello A
> 140272000374600:error:140770FC:SSL
> routines:SSL23_GET_SERVER_HELLO:unknown protocol:s23_clnt.c:766:
> ---
> no peer certificate available
> ---
> No client certificate CA names sent
> ---
> SSL handshake has read 7 bytes and written 263 bytes
> ---
> New, (NONE), Cipher is (NONE)
> Secure Renegotiation IS NOT supported
> Compression: NONE
> Expansion: NONE
>
> [root at spacewalk jabberd]# openssl s_client -connect spacewalk:5222
> -showcerts -state -CAfile /etc/pki/spacewalk/jabberd/server.pem
> CONNECTED(00000003)
> SSL_connect:before/connect initialization
> SSL_connect:SSLv2/v3 write client hello A
> SSL_connect:error in SSLv2/v3 read server hello A
> 140310952630088:error:140770FC:SSL
> routines:SSL23_GET_SERVER_HELLO:unknown protocol:s23_clnt.c:766:
> ---
> no peer certificate available
> ---
> No client certificate CA names sent
> ---
> SSL handshake has read 7 bytes and written 263 bytes
> ---
> New, (NONE), Cipher is (NONE)
> Secure Renegotiation IS NOT supported
> Compression: NONE
> Expansion: NONE
>
> Thank you very much
> Regards.
>
>
> 2013/12/13 Net Warrior <netwarrior863 at gmail.com
> <mailto:netwarrior863 at gmail.com>>
>
> These are the ports:
>
>
> COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
> router 14557 jabber 5u IPv4 4404471 0t0 TCP
> localhost:5347 (LISTEN)
> router 14557 jabber 6u IPv4 4404555 0t0 TCP
> localhost:5347->localhost:46998 (ESTABLISHED)
> router 14557 jabber 7u IPv4 4404568 0t0 TCP
> localhost:5347->localhost:mediabox (ESTABLISHED)
> c2s 14571 jabber 6u IPv4 4404567 0t0 TCP
> localhost:mediabox->localhost:5347 (ESTABLISHED)
> s2s 14578 jabber 6u IPv4 4404554 0t0 TCP
> localhost:46998->localhost:5347 (ESTABLISHED)
>
>
> router 14557 jabber 5u IPv4 4404471 0t0 TCP
> 127.0.0.1:5347 <http://127.0.0.1:5347> (LISTEN)
> router 14557 jabber 6u IPv4 4404555 0t0 TCP
> 127.0.0.1:5347->127.0.0.1:46998 <http://127.0.0.1:46998> (ESTABLISHED)
> router 14557 jabber 7u IPv4 4404568 0t0 TCP
> 127.0.0.1:5347->127.0.0.1:46999 <http://127.0.0.1:46999> (ESTABLISHED)
> c2s 14571 jabber 6u IPv4 4404567 0t0 TCP
> 127.0.0.1:46999->127.0.0.1:5347 <http://127.0.0.1:5347> (ESTABLISHED)
> c2s 14571 jabber 7u IPv4 4404615 0t0 TCP
> 128.2.101.107:5222 <http://128.2.101.107:5222> (LISTEN)
> s2s 14578 jabber 6u IPv4 4404554 0t0 TCP
> 127.0.0.1:46998->127.0.0.1:5347 <http://127.0.0.1:5347> (ESTABLISHED)
> s2s 14578 jabber 7u IPv4 4404614 0t0 TCP
> 128.2.101.107:5269 <http://128.2.101.107:5269> (LISTEN)
>
>
>
> 2013/12/13 Net Warrior <netwarrior863 at gmail.com
> <mailto:netwarrior863 at gmail.com>>
>
> Hi.
>
> Now I see more debug info, do not why, maybe after the
> certificate recreation triggered extra info ,I see this, the
> certificate being loaded.
>
>
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.check_cert('Loading cert', <X509Name object
> '/C=XX/ST=XXl/L=XX/O=XX/OU=XX/CN=spacewalk'>)
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> rhnSQL/driver_postgresql.convert_named_query_params('Converting query
> for PostgreSQL: select 1',)
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> rhnSQL/driver_postgresql.convert_named_query_params('New
> query: select 1',)
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> rhnSQL/driver_postgresql._execute_wrapper('Executing SQL:
> "select 1" with bind params: {}',)
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> rhnSQL/driver_postgresql.convert_named_query_params('Converting query
> for PostgreSQL: \n select id, password\n from
> rhnPushDispatcher\n where jabber_id like :jabber_id\n ',)
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> rhnSQL/driver_postgresql.convert_named_query_params('New
> query: \n select id, password\n from
> rhnPushDispatcher\n where jabber_id like %(jabber_id)s\n
> ',)
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> rhnSQL/driver_postgresql._execute_wrapper('Executing SQL: "\n
> select id, password\n from rhnPushDispatcher\n
> where jabber_id like %(jabber_id)s\n " with bind params:
> {jabber_id: rhn-dispatcher-sat%}',)
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.setup_connection('Connecting to', 'spacewalk')
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib._get_jabber_client
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib._get_jabber_client('Connecting to', 'spacewalk')
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.__init__
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.__init__
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.check_cert('Loading cert', <X509Name object
> '/C=XX/ST=XXl/L=XX/O=XX/OU=XX/CN=spacewalk'>)
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.connect
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.connect('Attempting to connect',)
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.process(300,)
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.process('before select(); timeout', 300.0)
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.process('select() returned',)
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib._auth_dispatch(<jabber.xmlstream.Node instance
> at 0x1a1add0>,)
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.connect('Connected',)
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.connect('Expecting features stanza, got:',
> <error><host-gone xmlns =
> 'urn:ietf:params:xml:ns:xmpp-streams' /><text xmlns =
> 'urn:ietf:params:xml:ns:xmpp-streams' >session manager for
> requested domain is not available</text></error>)
> 2013/12/13 11:18:29 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.connect('Server did not return a <features />
> stanza, reconnecting',)
> 2013/12/13 11:18:30 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.process(300,)
> 2013/12/13 11:18:30 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.process('before select(); timeout',
> 299.99999904632568)
> 2013/12/13 11:18:30 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.process('select() returned',)
> 2013/12/13 11:18:30 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib._auth_dispatch(<jabber.xmlstream.Node instance
> at 0x1a1a0e0>,)
> 2013/12/13 11:18:30 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.connect('Connected',)
> 2013/12/13 11:18:30 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.connect('Expecting features stanza, got:',
> <error><host-gone xmlns =
> 'urn:ietf:params:xml:ns:xmpp-streams' /><text xmlns =
> 'urn:ietf:params:xml:ns:xmpp-streams' >session manager for
> requested domain is not available</text></error>)
> 2013/12/13 11:18:30 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.connect('Server did not return a <features />
> stanza, reconnecting',)
> 2013/12/13 11:18:31 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.process(300,)
> 2013/12/13 11:18:31 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.process('before select(); timeout', 300.0)
> 2013/12/13 11:18:31 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.process('select() returned',)
> 2013/12/13 11:18:31 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib._auth_dispatch(<jabber.xmlstream.Node instance
> at 0x1a1a200>,)
> 2013/12/13 11:18:31 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.connect('Connected',)
>
> ---
>
> 2013/12/13 11:26:20 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.connect('Expecting features stanza, got:',
> <error><host-gone xmlns =
> 'urn:ietf:params:xml:ns:xmpp-streams' /><text xmlns =
> 'urn:ietf:params:xml:ns:xmpp-streams' >session manager for
> requested domain is not available</text></error>)
> 2013/12/13 11:26:20 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.connect('Server did not return a <features />
> stanza, reconnecting',)
> 2013/12/13 11:26:21 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.connect('ERROR', 'Not able to reconnect')
> 2013/12/13 11:26:21 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.print_message('SSLError',)
> 2013/12/13 11:26:21 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.print_message('Could not connect to jabber
> server', 'spacewalk')
> 2013/12/13 11:26:21 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.setup_connection('ERROR', 'Traceback (most
> recent call last):\n File
> "/usr/share/rhn/osad/jabber_lib.py", line 252, in
> setup_connection\n c = self._get_jabber_client(js)\n File
> "/usr/share/rhn/osad/jabber_lib.py", line 309, in
> _get_jabber_client\n c.connect()\n File
> "/usr/share/rhn/osad/jabber_lib.py", line 589, in connect\n
> raise SSLDisabledError\nSSLDisabledError\n')
> 2013/12/13 11:26:21 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.setup_connection('Could not connect to any
> jabber server',)
> 2013/12/13 11:26:21 -03:00 14741 0.0.0.0 <http://0.0.0.0>:
> osad/jabber_lib.main('Unable to connect to jabber servers,
> sleeping 10 seconds',)
>
> What's is talking about?
> >session manager for requested domain is not
> available</text></error
>
> maybe this can shed some light.
>
> Thanks a lot.
>
>
> 2013/12/13 Net Warrior <netwarrior863 at gmail.com
> <mailto:netwarrior863 at gmail.com>>
>
> SELinux disabled
>
> [root at spacewalk jabberd]# getsebool
> getsebool: SELinux is disabled
>
>
>
> 2013/12/13 Net Warrior <netwarrior863 at gmail.com
> <mailto:netwarrior863 at gmail.com>>
>
> I reinstalled jabberd but not osad, as it seems to be
> a certificate issue, ( I think ) I followed this guide
> to generate a new server.pem but still same errors,
> from the jabber docs:
>
> openssl req -new -x509 -newkey rsa:1024 -days 3650
> -keyout privkey.pem -out server.pem
> openssl rsa -in privkey.pem -out privkey.pem
> cat privkey.pem >> server.pem
> rm privkey.pem
> mv server.pem /usr/local/etc/jabberd/server.pem
>
> chown root:jabber /etc/pki/spacewalk/jabber/server.pem
> chmod 640 /etc/pki/spacewalk/jabber/server.pem
>
> Thank you very much.
>
>
> 2013/12/13 Balint Szigeti <balint.szgt at gmail.com
> <mailto:balint.szgt at gmail.com>>
>
> have you read this:
> https://fedorahosted.org/spacewalk/wiki/OsadHowTo
>
> On 13/12/13 11:46, Net Warrior wrote:
>> Hi.
>>
>> It was working before and the file did not exist,
>> so I assume I do not need it, the documentation
>> says it's for checking the client certificate.
>> <!-- SSL CA chain. Used to verify client
>> certificates. CA names published to client upon
>> connection -->, but as I said, I never have it
>> before.
>>
>> Do you know If I can reinstall and keep my
>> profiles/kickstart/repo/channel configuration? or
>> if there is a way to reconfigure this by creating
>> a new certificate? in the worst of the cases I'll
>> have to re-register the clients and that's not a
>> problem.
>>
>>
>> Thanks for your time
>> Regards.
>>
>>
>> 2013/12/13 Balint Szigeti <balint.szgt at gmail.com
>> <mailto:balint.szgt at gmail.com>>
>>
>> Hello
>>
>> Definitally, the
>> /etc/pki/spacewalk/jabberd/server.pem is
>> necessary. I don't think you can turn off the
>> SSL in Jabber.
>>
>> I haven't seen
>> /etc/jabberd/client_ca_certs.pem file before.
>> Do you have a proxy infrastructure? Maybe one
>> proxy server has it. What does google say
>> about this file?
>>
>> Sorry, I don't have time to check google
>> about this.
>>
>> B
>>
>>
>> On 12/12/13 19:49, Net Warrior wrote:
>>> The hostname definition is spacewalk in all
>>> the configuration files and not
>>> spacewalk.mydomain.com
>>> <http://spacewalk.mydomain.com> I also
>>> checked the certificate and is registered to
>>> spacewalk as well, I there a way to disable
>>> SSL to circunvent this issue in the meantime?
>>>
>>> One of the things that were added to the
>>> config is this line
>>> <id require-starttls="false"
>>> pemfile="/etc/pki/spacewalk/jabberd/server.pem"
>>> realm="" register-enable="true">spacewalk</id>
>>>
>>> I tried to enable/disable user
>>> /etc/jabbered/server.pem instead and still
>>> the same, I see there is a file which I do
>>> not have but never seems to existed
>>> before, <cachain>/etc/jabberd/client_ca_certs.pem</cachain>
>>> , is that file needed? maybe the new
>>> configuration requieres it.
>>>
>>> Thanks for your time.
>>> Regards
>>>
>>>
>>> 2013/12/12 Balint <balint.szgt at gmail.com
>>> <mailto:balint.szgt at gmail.com>>
>>>
>>> I had issue like yours, and the problem
>>> was, during the upgrade, 'something'
>>> change the hostname to FQDN or back and
>>> forth.
>>> Check your hostname in everywhere
>>> /etc/rhn, /etc/sysconfig/rhn,
>>> /etc/jabber and so on and change them to
>>> FQDN. Of course make a backup at first.
>>>
>>> B
>>>
>>> On 12/12/2013 14:35, Net Warrior wrote:
>>>> I had noticed that the services were
>>>> started listening only on IPv6 , now
>>>> it looks better but still same error,
>>>> SSLError.
>>>>
>>>> router 9184 jabber 5u IPv4
>>>> 3358801 0t0 TCP
>>>> 128.2.101.107:5347
>>>> <http://128.2.101.107:5347> (LISTEN)
>>>> router 9184 jabber 6u IPv4
>>>> 3358882 0t0 TCP
>>>> 128.2.101.107:5347->128.2.101.107:39240
>>>> <http://128.2.101.107:39240> (ESTABLISHED)
>>>> router 9184 jabber 7u IPv4
>>>> 3358900 0t0 TCP
>>>> 128.2.101.107:5347->128.2.101.107:39241
>>>> <http://128.2.101.107:39241> (ESTABLISHED)
>>>> c2s 9198 jabber 6u IPv4 3358881
>>>> 0t0 TCP
>>>> 128.2.101.107:39240->128.2.101.107:5347
>>>> <http://128.2.101.107:5347> (ESTABLISHED)
>>>> c2s 9198 jabber 7u IPv4 3358942
>>>> 0t0 TCP 128.2.101.107:5222
>>>> <http://128.2.101.107:5222> (LISTEN)
>>>> s2s 9205 jabber 6u IPv4 3358899
>>>> 0t0 TCP
>>>> 128.2.101.107:39241->128.2.101.107:5347
>>>> <http://128.2.101.107:5347> (ESTABLISHED)
>>>> s2s 9205 jabber 7u IPv4 3358945
>>>> 0t0 TCP 128.2.101.107:5269
>>>> <http://128.2.101.107:5269> (LISTEN)
>>>>
>>>>
>>>>
>>>>
>>>> 2013/12/12 Net Warrior
>>>> <netwarrior863 at gmail.com
>>>> <mailto:netwarrior863 at gmail.com>>
>>>>
>>>> This is the error:
>>>>
>>>> 2013/12/12 10:32:03 -03:00 28871
>>>> 0.0.0.0 <http://0.0.0.0>:
>>>> osad/jabber_lib.print_message('Could not
>>>> connect to jabber server', 'spacewalk')
>>>> 2013/12/12 10:32:03 -03:00 28871
>>>> 0.0.0.0 <http://0.0.0.0>:
>>>> osad/jabber_lib.setup_connection('ERROR',
>>>> 'Traceback (most recent call
>>>> last):\n File
>>>> "/usr/share/rhn/osad/jabber_lib.py", line
>>>> 252, in setup_connection\n c =
>>>> self._get_jabber_client(js)\n File
>>>> "/usr/share/rhn/osad/jabber_lib.py", line
>>>> 309, in _get_jabber_client\n
>>>> c.connect()\n File
>>>> "/usr/share/rhn/osad/jabber_lib.py", line
>>>> 589, in connect\n raise
>>>> SSLDisabledError\nSSLDisabledError\n')
>>>> 2013/12/12 10:32:03 -03:00 28871
>>>> 0.0.0.0 <http://0.0.0.0>:
>>>> osad/jabber_lib.setup_connection('Could
>>>> not connect to any jabber server',)
>>>> 2013/12/12 10:32:03 -03:00 28871
>>>> 0.0.0.0 <http://0.0.0.0>:
>>>> osad/jabber_lib.main('Unable to
>>>> connect to jabber servers, sleeping
>>>> 10 seconds',)
>>>> 2013/12/12 10:32:13 -03:00 28871
>>>> 0.0.0.0 <http://0.0.0.0>:
>>>> osad/jabber_lib.__init__
>>>> 2013/12/12 10:32:13 -03:00 28871
>>>> 0.0.0.0 <http://0.0.0.0>:
>>>> osad/jabber_lib.connect('Server did
>>>> not return a <features /> stanza,
>>>> reconnecting',)
>>>> 2013/12/12 10:32:14 -03:00 28871
>>>> 0.0.0.0 <http://0.0.0.0>:
>>>> osad/jabber_lib.connect('Server did
>>>> not return a <features /> stanza,
>>>> reconnecting',)
>>>> 2013/12/12 10:32:15 -03:00 28871
>>>> 0.0.0.0 <http://0.0.0.0>:
>>>> osad/jabber_lib.connect('Server did
>>>> not return a <features /> stanza,
>>>> reconnecting',)
>>>>
>>>>
>>>>
>>>> 2013/12/12 Net Warrior
>>>> <netwarrior863 at gmail.com
>>>> <mailto:netwarrior863 at gmail.com>>
>>>>
>>>> No, still having the SSLError
>>>> issue, I replaced the name
>>>> company with domain.com
>>>> <http://domain.com> just no to
>>>> publish it on the mailing list,
>>>> I can access the console as I
>>>> metioned yesterday after I
>>>> changed the db module from db
>>>> to sqlite, but cannot deploy
>>>> nothing else to the clients, no
>>>> updates, no config files,
>>>> cannot figure it out which is
>>>> the SSL issue.
>>>>
>>>> Thanks.
>>>>
>>>>
>>>> 2013/12/12 Balint Szigeti
>>>> <balint.szgt at gmail.com
>>>> <mailto:balint.szgt at gmail.com>>
>>>>
>>>> So finally, it works?
>>>>
>>>> B
>>>>
>>>> On 12/12/13 12:26, Net
>>>> Warrior wrote:
>>>>> Sorry, just replaced the
>>>>> real domain name ( the
>>>>> company name ) with
>>>>> domain.com
>>>>> <http://domain.com>, sorry
>>>>> if that confused a little,
>>>>> that's the FQDN which is
>>>>> correct and in the xml
>>>>> files it's like this.
>>>>>
>>>>> [root at spacewalk jabberd]#
>>>>> grep spacewalk *.xml
>>>>> c2s.xml: <id
>>>>> require-starttls="false"
>>>>> pemfile="/etc/pki/spacewalk/jabberd/server.pem"
>>>>> realm=""
>>>>> register-enable="true">spacewalk</id>
>>>>> sm.xml: <id>spacewalk</id>
>>>>> sm.xml: <id>spacewalk</id>
>>>>> sm.xml: <id>spacewalk</id>
>>>>> sm.xml: <id>spacewalk</id>
>>>>> sm.xml: <id>spacewalk</id>
>>>>> sm.xml: <id>spacewalk</id>
>>>>> sm.xml: <id>spacewalk</id>
>>>>>
>>>>> root at spacewalk rhn]# pwd
>>>>> /etc/sysconfig/rhn
>>>>> [root at spacewalk rhn]# grep
>>>>> spacewalk *
>>>>> rhn-entitlement-cert.xml:
>>>>> <rhn-cert-field
>>>>> name="satellite-version">spacewalk</rhn-cert-field>
>>>>>
>>>>> [root at spacewalk rhn]# pwd
>>>>> /etc/rhn
>>>>> [root at spacewalk rhn]# grep
>>>>> spacewalk *.conf
>>>>> # another spacewalk (or
>>>>> hosted).
>>>>> server.jabber_server =
>>>>> spacewalk.domain.com
>>>>> <http://spacewalk.domain.com>
>>>>> osa-dispatcher.jabber_server
>>>>> = spacewalk.domain.com
>>>>> <http://spacewalk.domain.com>
>>>>> cobbler.host = spacewalk
>>>>>
>>>>> [root at spacewalk jabberd]#
>>>>> grep spacewalk server.pem
>>>>> Issuer: C=AR, ST=XXl,
>>>>> L=XXX, O=COMPANY,
>>>>> OU=Systems, CN=spacewalk
>>>>> Subject: C=XX, ST=XX,
>>>>> O=COMPANY, OU=Systems,
>>>>> CN=spacewalk/emailAddress=user at company.com
>>>>> <mailto:user at company.com>
>>>>> DNS:spacewalk
>>>>>
>>>>> Thanks for your time and
>>>>> support.
>>>>> Regards.
>>>>>
>>>>>
>>>>> 2013/12/11 Justin Edmands
>>>>> <shockwavecs at gmail.com
>>>>> <mailto:shockwavecs at gmail.com>>
>>>>>
>>>>> On Wed, Dec 11, 2013
>>>>> at 2:18 PM, Net
>>>>> Warrior
>>>>> <netwarrior863 at gmail.com
>>>>> <mailto:netwarrior863 at gmail.com>>
>>>>> wrote:
>>>>>
>>>>> I was able to
>>>>> recover the
>>>>> console, one of
>>>>> the modification
>>>>> in c2s file was
>>>>>
>>>>> this
>>>>> <!-- Backend
>>>>> module to use -->
>>>>> <module>sqlite</module>
>>>>>
>>>>> to this
>>>>> <!-- Backend
>>>>> module to use -->
>>>>> <module>db</module>
>>>>>
>>>>> running c2s in
>>>>> debug mode I
>>>>> notice that it was
>>>>> waiting for the
>>>>> module db to
>>>>> initialize,
>>>>> changed it back to
>>>>> sqlite and it
>>>>> started again, but
>>>>> I'm back to the
>>>>> original error SSL.
>>>>>
>>>>> 2013/12/11
>>>>> 16:07:56 -03:00
>>>>> 21592 0.0.0.0
>>>>> <http://0.0.0.0>:
>>>>> osad/jabber_lib.__init__
>>>>> 2013/12/11
>>>>> 16:07:57 -03:00
>>>>> 21592 0.0.0.0
>>>>> <http://0.0.0.0>:
>>>>> osad/jabber_lib.connect('Server
>>>>> did not return a
>>>>> <features />
>>>>> stanza,
>>>>> reconnecting',)
>>>>> 2013/12/11
>>>>> 16:07:58 -03:00
>>>>> 21592 0.0.0.0
>>>>> <http://0.0.0.0>:
>>>>> osad/jabber_lib.connect('Server
>>>>> did not return a
>>>>> <features />
>>>>> stanza,
>>>>> reconnecting',)
>>>>> 2013/12/11
>>>>> 16:07:59 -03:00
>>>>> 21592 0.0.0.0
>>>>> <http://0.0.0.0>:
>>>>> osad/jabber_lib.connect('Server
>>>>> did not return a
>>>>> <features />
>>>>> stanza,
>>>>> reconnecting',)
>>>>> 2013/12/11
>>>>> 16:08:00 -03:00
>>>>> 21592 0.0.0.0
>>>>> <http://0.0.0.0>:
>>>>> osad/jabber_lib.connect('ERROR',
>>>>> 'Not able to
>>>>> reconnect')
>>>>> 2013/12/11
>>>>> 16:08:00 -03:00
>>>>> 21592 0.0.0.0
>>>>> <http://0.0.0.0>:
>>>>> osad/jabber_lib.print_message('SSLError',)
>>>>> 2013/12/11
>>>>> 16:08:00 -03:00
>>>>> 21592 0.0.0.0
>>>>> <http://0.0.0.0>:
>>>>> osad/jabber_lib.print_message('Could
>>>>> not connect to
>>>>> jabber server',
>>>>> 'spacewalk.domain.com
>>>>> <http://spacewalk.domain.com>')
>>>>> 2013/12/11
>>>>> 16:08:00 -03:00
>>>>> 21592 0.0.0.0
>>>>> <http://0.0.0.0>:
>>>>> osad/jabber_lib.setup_connection('ERROR',
>>>>> 'Traceback (most
>>>>> recent call
>>>>> last):\n File
>>>>> "/usr/share/rhn/osad/jabber_lib.py",
>>>>> line 252, in
>>>>> setup_connection\n
>>>>> c =
>>>>> self._get_jabber_client(js)\n
>>>>> File
>>>>> "/usr/share/rhn/osad/jabber_lib.py",
>>>>> line 309, in
>>>>> _get_jabber_client\n
>>>>> c.connect()\n
>>>>> File
>>>>> "/usr/share/rhn/osad/jabber_lib.py",
>>>>> line 589, in
>>>>> connect\n raise
>>>>> SSLDisabledError\nSSLDisabledError\n')
>>>>> 2013/12/11
>>>>> 16:08:00 -03:00
>>>>> 21592 0.0.0.0
>>>>> <http://0.0.0.0>:
>>>>> osad/jabber_lib.setup_connection('Could
>>>>> not connect to any
>>>>> jabber server',)
>>>>> 2013/12/11
>>>>> 16:08:00 -03:00
>>>>> 21592 0.0.0.0
>>>>> <http://0.0.0.0>:
>>>>> osad/jabber_lib.main('Unable
>>>>> to connect to
>>>>> jabber servers,
>>>>> sleeping 10 seconds',)
>>>>>
>>>>>
>>>>>
>>>>> 2013/12/11
>>>>> 16:08:10 -03:00
>>>>> 21592 0.0.0.0
>>>>> <http://0.0.0.0>:
>>>>> osad/jabber_lib.__init__
>>>>> 2013/12/11
>>>>> 16:08:10 -03:00
>>>>> 21592 0.0.0.0
>>>>> <http://0.0.0.0>:
>>>>> osad/jabber_lib.connect('Server
>>>>> did not return a
>>>>> <features />
>>>>> stanza,
>>>>> reconnecting',)
>>>>>
>>>>> /etc/pki/spacewalk/jabberd/server.pem
>>>>> and
>>>>> /etc/jabberd/server.pem
>>>>> are the same they
>>>>> have the date/time
>>>>> when the
>>>>> installation took
>>>>> place.
>>>>>
>>>>>
>>>>> The services and
>>>>> port are up and
>>>>> listening:
>>>>>
>>>>> router 21408
>>>>> jabber 5u IPv6
>>>>> 2405903 0t0
>>>>> TCP *:5347 (LISTEN)
>>>>> router 21408
>>>>> jabber 6u IPv6
>>>>> 2405987 0t0
>>>>> TCP
>>>>> [::1]:5347->[::1]:36295
>>>>> (ESTABLISHED)
>>>>> router 21408
>>>>> jabber 7u IPv6
>>>>> 2406000 0t0
>>>>> TCP
>>>>> [::1]:5347->[::1]:36296
>>>>> (ESTABLISHED)
>>>>> c2s 21422 jabber
>>>>> 6u IPv6
>>>>> 2405999 0t0 TCP
>>>>> [::1]:36296->[::1]:5347
>>>>> (ESTABLISHED)
>>>>> c2s 21422 jabber
>>>>> 7u IPv6
>>>>> 2406036 0t0
>>>>> TCP *:5222 (LISTEN)
>>>>> s2s 21429 jabber
>>>>> 6u IPv6
>>>>> 2405986 0t0 TCP
>>>>> [::1]:36295->[::1]:5347
>>>>> (ESTABLISHED)
>>>>> s2s 21429 jabber
>>>>> 7u IPv6
>>>>> 2406034 0t0 TCP
>>>>> *:5269 (LISTEN)
>>>>> [root at spacewalk
>>>>> jabberd]#
>>>>>
>>>>> Thanks for your
>>>>> time and support
>>>>> Best regards.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 2013/12/11 Net
>>>>> Warrior
>>>>> <netwarrior863 at gmail.com
>>>>> <mailto:netwarrior863 at gmail.com>>
>>>>>
>>>>> Hi Justin.
>>>>>
>>>>> 1
>>>>> /etc/pki/spacewalk/jabberd/server.pem
>>>>> is the same,
>>>>> did not change
>>>>> 2 I have no
>>>>> backup
>>>>> 3 no issues
>>>>> with the FQDN
>>>>> server
>>>>> configuration.
>>>>> 4 Gonna check
>>>>> the FQDN in
>>>>> the c2s/s2s
>>>>> files, I
>>>>> restored the
>>>>> c2s.xml-swsave
>>>>> which were
>>>>> created duting
>>>>> the update and
>>>>> none of the
>>>>> jabbers
>>>>> services start
>>>>> up.
>>>>> routes/sm/c2s/s2s
>>>>> On the other
>>>>> hand, is there
>>>>> a way to
>>>>> reconfigure
>>>>> this,? can I
>>>>> use
>>>>> spacewalk-setup-jabberd
>>>>> to do so? in
>>>>> this moment
>>>>> the system is
>>>>> useless and
>>>>> reinstalling
>>>>> wont be very
>>>>> funny, have
>>>>> 500 servers
>>>>> more than less
>>>>> plus kickstart
>>>>> configurations
>>>>> and other stuff.
>>>>> Thanks for
>>>>> your time and
>>>>> support.
>>>>> Regards.
>>>>>
>>>>> 2013/12/11
>>>>> Justin Edmands
>>>>> <shockwavecs at gmail.com
>>>>> <mailto:shockwavecs at gmail.com>>
>>>>>
>>>>> On Wed,
>>>>> Dec 11,
>>>>> 2013 at
>>>>> 11:17 AM,
>>>>> Balint
>>>>> Szigeti
>>>>> <balint.szgt at gmail.com
>>>>> <mailto:balint.szgt at gmail.com>>
>>>>> wrote:
>>>>>
>>>>> Is
>>>>> your
>>>>> /etc/pki/spacewalk/jabberd/server.pem
>>>>> file
>>>>> changed?
>>>>> Do you
>>>>> have
>>>>> backup
>>>>> from
>>>>> full /etc?
>>>>> Was
>>>>> your
>>>>> hostname/FQDN
>>>>> changed?
>>>>>
>>>>> I
>>>>> think,
>>>>> your
>>>>> DB
>>>>> access/FQDN
>>>>> or
>>>>> jabber's
>>>>> certs
>>>>> were
>>>>> changed during.
>>>>>
>>>>> Check
>>>>> your
>>>>> FQDN
>>>>> in
>>>>> c2s/s2s and
>>>>> sm.xml
>>>>> file.
>>>>> Plus
>>>>> check
>>>>> it in
>>>>> your
>>>>> backed
>>>>> up ones.
>>>>> If you
>>>>> replace the
>>>>> new
>>>>> jabber
>>>>> dir
>>>>> with
>>>>> the
>>>>> old
>>>>> one,
>>>>> the
>>>>> issue
>>>>> is
>>>>> still
>>>>> remain?
>>>>>
>>>>> Balint
>>>>>
>>>>>
>>>>> On
>>>>> 11/12/13
>>>>> 15:49,
>>>>> Net
>>>>> Warrior wrote:
>>>>>> Yes,
>>>>>> I
>>>>>> notice the
>>>>>> password
>>>>>> section
>>>>>> and
>>>>>> others,
>>>>>> changing
>>>>>> the
>>>>>> password
>>>>>> made
>>>>>> any
>>>>>> difference,
>>>>>> running
>>>>>> the
>>>>>> service
>>>>>> like
>>>>>> this
>>>>>>
>>>>>> /usr/bin/c2s
>>>>>> -c
>>>>>> /etc/jabberd//c2s.xml
>>>>>> -D I
>>>>>> see
>>>>>> erros
>>>>>> like
>>>>>> these, no
>>>>>> host
>>>>>> available,
>>>>>> do
>>>>>> not
>>>>>> know
>>>>>> if
>>>>>> it's
>>>>>> trying to
>>>>>> resolve
>>>>>> by
>>>>>> name or
>>>>>> if
>>>>>> it's
>>>>>> something
>>>>>> else
>>>>>>
>>>>>> s2c
>>>>>> and
>>>>>> router are
>>>>>> loaded,
>>>>>> c2s
>>>>>> doesnt'
>>>>>> start
>>>>>> up
>>>>>> that
>>>>>> why
>>>>>> I'm
>>>>>> running
>>>>>> it
>>>>>> manually
>>>>>> with -D
>>>>>>
>>>>>> Wed
>>>>>> Dec
>>>>>> 11
>>>>>> 12:41:25
>>>>>> 2013
>>>>>> c2s.c:836
>>>>>> coming online
>>>>>> Wed
>>>>>> Dec
>>>>>> 11
>>>>>> 12:41:25
>>>>>> 2013
>>>>>> [notice]
>>>>>> [0.0.0.0,
>>>>>> port=5222]
>>>>>> listening
>>>>>> for
>>>>>> connections
>>>>>> Wed
>>>>>> Dec
>>>>>> 11
>>>>>> 12:41:25
>>>>>> 2013
>>>>>> [notice]
>>>>>> ready
>>>>>> for
>>>>>> connections
>>>>>>
>>>>>>
>>>>>> jabber 9764
>>>>>> 1
>>>>>> 0
>>>>>> 12:28
>>>>>> ?
>>>>>> 00:00:00
>>>>>> /usr/bin/router
>>>>>> -c
>>>>>> /etc/jabberd//router.xml
>>>>>> jabber 9785
>>>>>> 1
>>>>>> 0
>>>>>> 12:28
>>>>>> ?
>>>>>> 00:00:00
>>>>>> /usr/bin/s2s
>>>>>> -c
>>>>>> /etc/jabberd//s2s.xml
>>>>>>
>>>>>> Wed
>>>>>> Dec
>>>>>> 11
>>>>>> 12:39:36
>>>>>> 2013
>>>>>> c2s.c:640
>>>>>> component
>>>>>> available
>>>>>> from
>>>>>> 's2s'
>>>>>> Wed
>>>>>> Dec
>>>>>> 11
>>>>>> 12:39:36
>>>>>> 2013
>>>>>> c2s.c:642
>>>>>> sm
>>>>>> for
>>>>>> serviced
>>>>>> domain 's2s'
>>>>>> online
>>>>>> Wed
>>>>>> Dec
>>>>>> 11
>>>>>> 12:39:52
>>>>>> 2013
>>>>>> [notice]
>>>>>> connection
>>>>>> to
>>>>>> router established
>>>>>>
>>>>>>
>>>>>> The
>>>>>> errors :
>>>>>> Wed
>>>>>> Dec
>>>>>> 11
>>>>>> 12:35:25
>>>>>> 2013
>>>>>> c2s.c:185
>>>>>> no
>>>>>> host
>>>>>> available
>>>>>> for
>>>>>> requested
>>>>>> domain 'spacewalk'
>>>>>> Wed
>>>>>> Dec
>>>>>> 11
>>>>>> 12:35:25
>>>>>> 2013
>>>>>> c2s.c:185
>>>>>> no
>>>>>> host
>>>>>> available
>>>>>> for
>>>>>> requested
>>>>>> domain 'spacewalk'
>>>>>>
>>>>>> Wed
>>>>>> Dec
>>>>>> 11
>>>>>> 12:36:00
>>>>>> 2013
>>>>>> c2s.c:185
>>>>>> no
>>>>>> host
>>>>>> available
>>>>>> for
>>>>>> requested
>>>>>> domain 'spacewalk.domain.com
>>>>>> <http://spacewalk.domain.com/>'
>>>>>> sx
>>>>>> (error.c:79)
>>>>>> prepared
>>>>>> error: <stream:error
>>>>>> xmlns:stream='http://etherx.jabber.org/streams'><host-unknown
>>>>>> xmlns='urn:ietf:params:xml:ns:xmpp-streams'/><text
>>>>>> xmlns='urn:ietf:params:xml:ns:xmpp-streams'>service
>>>>>> requested
>>>>>> for
>>>>>> unknown
>>>>>> domain</text></stream:error>
>>>>>> sx
>>>>>> (error.c:94)
>>>>>> tag 8
>>>>>> event
>>>>>> 1
>>>>>> data 0x0
>>>>>> Wed
>>>>>> Dec
>>>>>> 11
>>>>>> 12:36:00
>>>>>> 2013
>>>>>> c2s.c:40
>>>>>> want
>>>>>> write
>>>>>> Wed
>>>>>> Dec
>>>>>> 11
>>>>>> 12:36:00
>>>>>> 2013
>>>>>> c2s.c:539
>>>>>> write
>>>>>> action on
>>>>>> fd 8
>>>>>> sx
>>>>>> (io.c:328)
>>>>>> 8
>>>>>> ready
>>>>>> for
>>>>>> writing
>>>>>> sx
>>>>>> (io.c:286)
>>>>>> encoding
>>>>>> 229
>>>>>> bytes
>>>>>> for
>>>>>> writing:
>>>>>> <stream:error
>>>>>> xmlns:stream='http://etherx.jabber.org/streams'><host-unknown
>>>>>> xmlns='urn:ietf:params:xml:ns:xmpp-streams'/><text
>>>>>> xmlns='urn:ietf:params:xml:ns:xmpp-streams'>service
>>>>>> requested
>>>>>> for
>>>>>> unknown
>>>>>> domain</text></stream:error>
>>>>>>
>>>>>> I can
>>>>>> alse
>>>>>> see
>>>>>> lots
>>>>>> of
>>>>>> request
>>>>>> from
>>>>>> differents
>>>>>> IP,
>>>>>> as if
>>>>>> it
>>>>>> were
>>>>>> scanning
>>>>>> something:
>>>>>> Wed
>>>>>> Dec
>>>>>> 11
>>>>>> 12:40:33
>>>>>> 2013
>>>>>> c2s.c:544
>>>>>> close
>>>>>> action on
>>>>>> fd 8
>>>>>> Wed
>>>>>> Dec
>>>>>> 11
>>>>>> 12:40:33
>>>>>> 2013
>>>>>> [notice]
>>>>>> [8]
>>>>>> [172.16.8.27,
>>>>>> port=45487]
>>>>>> disconnect
>>>>>> jid=unbound,
>>>>>> packets:
>>>>>> 0
>>>>>> sx
>>>>>> (server.c:45)
>>>>>> building
>>>>>> features
>>>>>> nad
>>>>>>
>>>>>> Leaving
>>>>>> the
>>>>>> c2s
>>>>>> running
>>>>>> and
>>>>>> starting
>>>>>> osad
>>>>>> I get
>>>>>> the
>>>>>> [root at spacewalk
>>>>>> ~]#
>>>>>> osa-dispatcher
>>>>>> start
>>>>>> Spacewalk
>>>>>> 10359
>>>>>> 2013/12/11
>>>>>> 12:43:08
>>>>>> -03:00:
>>>>>> ('Not
>>>>>> able
>>>>>> to
>>>>>> reconnect',)
>>>>>> Spacewalk
>>>>>> 10359
>>>>>> 2013/12/11
>>>>>> 12:43:08
>>>>>> -03:00:
>>>>>> ('Traceback
>>>>>> (most
>>>>>> recent call
>>>>>> last):\n
>>>>>> File
>>>>>> "/usr/share/rhn/osad/jabber_lib.py",
>>>>>> line
>>>>>> 252,
>>>>>> in
>>>>>> setup_connection\n
>>>>>> c
>>>>>> =
>>>>>> self._get_jabber_client(js)\n
>>>>>> File
>>>>>> "/usr/share/rhn/osad/jabber_lib.py",
>>>>>> line
>>>>>> 309,
>>>>>> in
>>>>>> _get_jabber_client\n
>>>>>> c.connect()\n
>>>>>> File
>>>>>> "/usr/share/rhn/osad/jabber_lib.py",
>>>>>> line
>>>>>> 589,
>>>>>> in
>>>>>> connect\n
>>>>>> raise SSLDisabledError\nSSLDisabledError\n',)
>>>>>>
>>>>>>
>>>>>> 2013/12/11
>>>>>> 12:44:00
>>>>>> -03:00 10359
>>>>>> 0.0.0.0
>>>>>> <http://0.0.0.0/>:
>>>>>> osad/jabber_lib.setup_connection('Could
>>>>>> not
>>>>>> connect
>>>>>> to
>>>>>> any
>>>>>> jabber server',)
>>>>>> 2013/12/11
>>>>>> 12:44:00
>>>>>> -03:00 10359
>>>>>> 0.0.0.0
>>>>>> <http://0.0.0.0/>:
>>>>>> osad/jabber_lib.main('Unable
>>>>>> to
>>>>>> connect
>>>>>> to
>>>>>> jabber servers,
>>>>>> sleeping
>>>>>> 10
>>>>>> seconds',)
>>>>>> 2013/12/11
>>>>>> 12:44:10
>>>>>> -03:00 10359
>>>>>> 0.0.0.0
>>>>>> <http://0.0.0.0/>:
>>>>>> osad/jabber_lib.__init__
>>>>>> 2013/12/11
>>>>>> 12:44:10
>>>>>> -03:00 10359
>>>>>> 0.0.0.0
>>>>>> <http://0.0.0.0/>:
>>>>>> osad/jabber_lib.connect('Server
>>>>>> did
>>>>>> not
>>>>>> return a
>>>>>> <features
>>>>>> />
>>>>>> stanza,
>>>>>> reconnecting',)
>>>>>> 2013/12/11
>>>>>> 12:44:11
>>>>>> -03:00 10359
>>>>>> 0.0.0.0
>>>>>> <http://0.0.0.0/>:
>>>>>> osad/jabber_lib.connect('Server
>>>>>> did
>>>>>> not
>>>>>> return a
>>>>>> <features
>>>>>> />
>>>>>> stanza,
>>>>>> reconnecting',)
>>>>>>
>>>>>>
>>>>>> 2013/12/11
>>>>>> 12:44:12
>>>>>> -03:00 10359
>>>>>> 0.0.0.0
>>>>>> <http://0.0.0.0/>:
>>>>>> osad/jabber_lib.connect('Server
>>>>>> did
>>>>>> not
>>>>>> return a
>>>>>> <features
>>>>>> />
>>>>>> stanza,
>>>>>> reconnecting',)
>>>>>> 2013/12/11
>>>>>> 12:44:13
>>>>>> -03:00 10359
>>>>>> 0.0.0.0
>>>>>> <http://0.0.0.0/>:
>>>>>> osad/jabber_lib.connect('ERROR',
>>>>>> 'Not
>>>>>> able
>>>>>> to
>>>>>> reconnect')
>>>>>> 2013/12/11
>>>>>> 12:44:13
>>>>>> -03:00 10359
>>>>>> 0.0.0.0
>>>>>> <http://0.0.0.0/>:
>>>>>> osad/jabber_lib.print_message('SSLError',)
>>>>>>
>>>>>> Restroring
>>>>>> the
>>>>>> old
>>>>>> config I
>>>>>> get
>>>>>> the
>>>>>> same
>>>>>> error.
>>>>>>
>>>>>>
>>>>>> Thanks for
>>>>>> your
>>>>>> time
>>>>>> and
>>>>>> support.
>>>>>> Regards
>>>>>>
>>>>>> 2013/12/11
>>>>>> Balint Szigeti
>>>>>> <balint.szgt at gmail.com
>>>>>> <mailto:balint.szgt at gmail.com>>
>>>>>>
>>>>>> Have
>>>>>> you
>>>>>> read
>>>>>> the
>>>>>> diff's
>>>>>> output?
>>>>>>
>>>>>> The
>>>>>> <pass>
>>>>>> sections
>>>>>> are
>>>>>> modified.
>>>>>> If I
>>>>>> were
>>>>>> you,
>>>>>> I
>>>>>> tried
>>>>>> to with
>>>>>> the
>>>>>> new
>>>>>> conf
>>>>>> file
>>>>>> and
>>>>>> the
>>>>>> old
>>>>>> pass
>>>>>> sections.
>>>>>> Some
>>>>>> other
>>>>>> <> sections
>>>>>> were
>>>>>> affected
>>>>>> as well:
>>>>>>
>>>>>>
>>>>>>
>>>>>> <!--
>>>>>> IP address
>>>>>> to bind
>>>>>> to (default:
>>>>>> 0.0.0.0)
>>>>>> -->
>>>>>> -
>>>>>> <ip>::</ip>
>>>>>> +
>>>>>> <ip>0.0.0.0</ip>
>>>>>> <!--
>>>>>> Port
>>>>>> to bind
>>>>>> to,
>>>>>> or 0
>>>>>> to disable
>>>>>> unencrypted
>>>>>> access
>>>>>> to the
>>>>>> server
>>>>>> (default:
>>>>>> 5222)
>>>>>> -->
>>>>>> @@ -301,7
>>>>>> +301,7
>>>>>> @@
>>>>>>
>>>>>> the
>>>>>> following
>>>>>> checks
>>>>>> applied.
>>>>>>
>>>>>> 0
>>>>>> disables
>>>>>> all
>>>>>> checks.
>>>>>> (default:
>>>>>> 0) -->
>>>>>> -
>>>>>> <interval>60</interval>
>>>>>> +
>>>>>> <interval>0</interval>
>>>>>> <!--
>>>>>> Idle
>>>>>> connection
>>>>>> checks.
>>>>>> @@ -319,7
>>>>>> +319,7
>>>>>> @@
>>>>>>
>>>>>> disconnected
>>>>>> without
>>>>>> us knowing
>>>>>> about
>>>>>> it.
>>>>>>
>>>>>> 0
>>>>>> disables
>>>>>> keepalives.
>>>>>> (default:
>>>>>> 0) -->
>>>>>> -
>>>>>> <keepalive>60</keepalive>
>>>>>> +
>>>>>> <keepalive>0</keepalive>
>>>>>>
>>>>>> Try
>>>>>> the
>>>>>> merge
>>>>>> the
>>>>>> old
>>>>>> pass
>>>>>> into
>>>>>> the
>>>>>> new
>>>>>> xml
>>>>>> file
>>>>>> and
>>>>>> let
>>>>>> see.
>>>>>> I'm
>>>>>> looking
>>>>>> forward
>>>>>> to the
>>>>>> result
>>>>>> :)
>>>>>>
>>>>>> B
>>>>>>
>>>>>>
>>>>>> On 11/12/13
>>>>>> 14:05,
>>>>>> Net
>>>>>> Warrior
>>>>>> wrote:
>>>>>>> Hi.
>>>>>>>
>>>>>>> I made
>>>>>>> a yum
>>>>>>> upgrade,
>>>>>>> I upgraded
>>>>>>> to
>>>>>>> CentOS
>>>>>>> 6.5,
>>>>>>> and
>>>>>>> obiously
>>>>>>> there
>>>>>>> were
>>>>>>> updates
>>>>>>> related
>>>>>>> to
>>>>>>> spacewalk
>>>>>>> as
>>>>>>> well,
>>>>>>> I
>>>>>>> did
>>>>>>> not
>>>>>>> see
>>>>>>> any
>>>>>>> ssl
>>>>>>> regeneration,
>>>>>>> if
>>>>>>> that
>>>>>>> happened
>>>>>>> in
>>>>>>> background
>>>>>>> do
>>>>>>> not
>>>>>>> know.
>>>>>>>
>>>>>>>
>>>>>>> Clients
>>>>>>> have:
>>>>>>>
>>>>>>> osad-5.11.27-1.el6.noarch
>>>>>>>
>>>>>>> Server
>>>>>>> has:
>>>>>>> osa-dispatcher-5.11.27-1.el6.noarch
>>>>>>> osa-dispatcher-selinux-5.11.27-1.el6.noarch
>>>>>>>
>>>>>>> In
>>>>>>> the
>>>>>>> server
>>>>>>> I get
>>>>>>> Starting
>>>>>>> osa-dispatcher:
>>>>>>> The
>>>>>>> server
>>>>>>> log
>>>>>>>
>>>>>>> 2013/12/11
>>>>>>> 10:28:52
>>>>>>> -03:00
>>>>>>> 26709
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.setup_connection('ERROR',
>>>>>>> 'Traceback
>>>>>>> (most
>>>>>>> recent
>>>>>>> call
>>>>>>> last):\n
>>>>>>> File
>>>>>>> "/usr/share/rhn/osad/jabber_lib.py",
>>>>>>> line
>>>>>>> 252,
>>>>>>> in
>>>>>>> setup_connection\n
>>>>>>> c
>>>>>>> = self._get_jabber_client(js)\n
>>>>>>> File
>>>>>>> "/usr/share/rhn/osad/jabber_lib.py",
>>>>>>> line
>>>>>>> 309,
>>>>>>> in
>>>>>>> _get_jabber_client\n
>>>>>>> c.connect()\n
>>>>>>> File
>>>>>>> "/usr/share/rhn/osad/jabber_lib.py",
>>>>>>> line
>>>>>>> 567,
>>>>>>> in
>>>>>>> connect\n
>>>>>>> jabber.Client.connect(self)\n
>>>>>>> File
>>>>>>> "/usr/lib/python2.6/site-packages/jabber/xmlstream.py",
>>>>>>> line
>>>>>>> 488,
>>>>>>> in
>>>>>>> connect\n
>>>>>>> raise
>>>>>>> socket.error("Unable
>>>>>>> to
>>>>>>> connect
>>>>>>> to
>>>>>>> the
>>>>>>> host
>>>>>>> and
>>>>>>> port
>>>>>>> specified")\nerror:
>>>>>>> Unable
>>>>>>> to
>>>>>>> connect
>>>>>>> to
>>>>>>> the
>>>>>>> host
>>>>>>> and
>>>>>>> port
>>>>>>> specified\n')
>>>>>>> 2013/12/11
>>>>>>> 10:28:52
>>>>>>> -03:00
>>>>>>> 26709
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.sertup_connection('Could
>>>>>>> not
>>>>>>> connect
>>>>>>> to
>>>>>>> any
>>>>>>> jabber
>>>>>>> server',)
>>>>>>> 2013/12/11
>>>>>>> 10:28:52
>>>>>>> -03:00
>>>>>>> 26709
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.main('Unable
>>>>>>> to
>>>>>>> connect
>>>>>>> to
>>>>>>> jabber
>>>>>>> servers,
>>>>>>> sleeping
>>>>>>> 10
>>>>>>> seconds',)
>>>>>>> 2013/12/11
>>>>>>> 10:29:02
>>>>>>> -03:00
>>>>>>> 26709
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.__init__
>>>>>>> 2013/12/11
>>>>>>> 10:29:02
>>>>>>> -03:00
>>>>>>> 26709
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.print_message('socket
>>>>>>> error',)
>>>>>>> 2013/12/11
>>>>>>> 10:29:02
>>>>>>> -03:00
>>>>>>> 26709
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.print_message('Could
>>>>>>> not
>>>>>>> connect
>>>>>>> to
>>>>>>> jabber
>>>>>>> server',
>>>>>>> 'spacewalk.domain.com
>>>>>>> <http://spacewalk.domain.com/>')
>>>>>>> 2013/12/11
>>>>>>> 10:29:02
>>>>>>> -03:00
>>>>>>> 26709
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.setup_connection('ERROR',
>>>>>>> 'Traceback
>>>>>>> (most
>>>>>>> recent
>>>>>>> call
>>>>>>> last):\n
>>>>>>> File
>>>>>>> "/usr/share/rhn/osad/jabber_lib.py",
>>>>>>> line
>>>>>>> 252,
>>>>>>> in
>>>>>>> setup_connection\n
>>>>>>> c
>>>>>>> = self._get_jabber_client(js)\n
>>>>>>> File
>>>>>>> "/usr/share/rhn/osad/jabber_lib.py",
>>>>>>> line
>>>>>>> 309,
>>>>>>> in
>>>>>>> _get_jabber_client\n
>>>>>>> c.connect()\n
>>>>>>> File
>>>>>>> "/usr/share/rhn/osad/jabber_lib.py",
>>>>>>> line
>>>>>>> 567,
>>>>>>> in
>>>>>>> connect\n
>>>>>>> jabber.Client.connect(self)\n
>>>>>>> File
>>>>>>> "/usr/lib/python2.6/site-packages/jabber/xmlstream.py",
>>>>>>> line
>>>>>>> 488,
>>>>>>> in
>>>>>>> connect\n
>>>>>>> raise
>>>>>>> socket.error("Unable
>>>>>>> to
>>>>>>> connect
>>>>>>> to
>>>>>>> the
>>>>>>> host
>>>>>>> and
>>>>>>> port
>>>>>>> specified")\nerror:
>>>>>>> Unable
>>>>>>> to
>>>>>>> connect
>>>>>>> to
>>>>>>> the
>>>>>>> host
>>>>>>> and
>>>>>>> port
>>>>>>> specified\n')
>>>>>>> 2013/12/11
>>>>>>> 10:29:02
>>>>>>> -03:00
>>>>>>> 26709
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.setup_connection('Could
>>>>>>> not
>>>>>>> connect
>>>>>>> to
>>>>>>> any
>>>>>>> jabber
>>>>>>> server',)
>>>>>>> 2013/12/11
>>>>>>> 10:29:02
>>>>>>> -03:00
>>>>>>> 26709
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.main('Unable
>>>>>>> to
>>>>>>> connect
>>>>>>> to
>>>>>>> jabber
>>>>>>> servers,
>>>>>>> sleeping
>>>>>>> 10
>>>>>>> seconds',)
>>>>>>>
>>>>>>> These
>>>>>>> are
>>>>>>> the
>>>>>>> c2s
>>>>>>> diff.:
>>>>>>>
>>>>>>> [root at spacewalk
>>>>>>> jabberd]#
>>>>>>> diff
>>>>>>> -u
>>>>>>> /etc/jabberd/c2s.xml
>>>>>>> /root/temp/jabberd/c2s.xml-orig
>>>>>>>
>>>>>>>
>>>>>>> ---
>>>>>>> /etc/jabberd/c2s.xml
>>>>>>> 2013-12-11
>>>>>>> 10:14:06.000000000
>>>>>>> -0300
>>>>>>> +++
>>>>>>> /root/temp/jabberd/c2s.xml-orig
>>>>>>>
>>>>>>> 2013-12-09
>>>>>>> 11:34:15.000000000
>>>>>>> -0300
>>>>>>> @@
>>>>>>> -10,12
>>>>>>> +10,12
>>>>>>> @@
>>>>>>> <!--
>>>>>>> Router
>>>>>>> connection
>>>>>>> configuration
>>>>>>> -->
>>>>>>> <router>
>>>>>>> <!--
>>>>>>> IP/port
>>>>>>> the
>>>>>>> router
>>>>>>> is
>>>>>>> waiting
>>>>>>> for
>>>>>>> connections
>>>>>>> on
>>>>>>> -->
>>>>>>> - <ip>::1</ip>
>>>>>>> <!--
>>>>>>> default:
>>>>>>> 127.0.0.1
>>>>>>> -->
>>>>>>> + <ip>127.0.0.1</ip>
>>>>>>> <!--
>>>>>>> default:
>>>>>>> 127.0.0.1
>>>>>>> -->
>>>>>>> <port>5347</port>
>>>>>>> <!--
>>>>>>> default:
>>>>>>> 5347
>>>>>>> -->
>>>>>>> <!--
>>>>>>> Username/password
>>>>>>> to
>>>>>>> authenticate
>>>>>>> as
>>>>>>> -->
>>>>>>> <user>jabberd</user>
>>>>>>> <!--
>>>>>>> default:
>>>>>>> jabberd
>>>>>>> -->
>>>>>>> - <pass>9b6d8078f992346e0537a6e5514def7ffc28374b</pass>
>>>>>>> <!--
>>>>>>> default:
>>>>>>> secret
>>>>>>> -->
>>>>>>> + <pass>71d26fd8f21c6cf9660217f363613a45d3a28e9d</pass>
>>>>>>> <!--
>>>>>>> default:
>>>>>>> secret
>>>>>>> -->
>>>>>>> <!--
>>>>>>> File
>>>>>>> containing
>>>>>>> an
>>>>>>> SSL
>>>>>>> certificate
>>>>>>> and
>>>>>>> private
>>>>>>> key
>>>>>>> to
>>>>>>> use
>>>>>>> when
>>>>>>> setting
>>>>>>> up
>>>>>>> an
>>>>>>> encrypted
>>>>>>> channel
>>>>>>> with
>>>>>>> the
>>>>>>> router.
>>>>>>> From
>>>>>>> @@
>>>>>>> -50,7
>>>>>>> +50,7
>>>>>>> @@
>>>>>>> </router>
>>>>>>> <!--
>>>>>>> Log
>>>>>>> configuration
>>>>>>> - type
>>>>>>> is
>>>>>>> "syslog",
>>>>>>> "file"
>>>>>>> or
>>>>>>> "stdout"
>>>>>>> -->
>>>>>>> - <log
>>>>>>> type="syslog">
>>>>>>> + <log
>>>>>>> type='syslog'>
>>>>>>> <!--
>>>>>>> If
>>>>>>> logging
>>>>>>> to
>>>>>>> syslog,
>>>>>>> this
>>>>>>> is
>>>>>>> the
>>>>>>> log
>>>>>>> ident
>>>>>>> -->
>>>>>>> <ident>jabberd/c2s</ident>
>>>>>>> @@
>>>>>>> -133,7
>>>>>>> +133,7
>>>>>>> @@
>>>>>>> you
>>>>>>> want
>>>>>>> this,
>>>>>>> add
>>>>>>> this
>>>>>>> attribute
>>>>>>> with
>>>>>>> any
>>>>>>> value,
>>>>>>> when
>>>>>>> you
>>>>>>> need
>>>>>>> registration
>>>>>>> disabled.
>>>>>>> -->
>>>>>>> - <id
>>>>>>> require-starttls="false"
>>>>>>> pemfile="/etc/pki/spacewalk/jabberd/server.pem"
>>>>>>> realm=""
>>>>>>> register-enable="true">spacewalk</id>
>>>>>>> + <id
>>>>>>> register-enable='mu'>localhost.localdomain</id>
>>>>>>> <!--
>>>>>>> or
>>>>>>> <id
>>>>>>> realm='company.int
>>>>>>> <http://company.int/>'
>>>>>>> pemfile='/etc/jabberd/server.pem'
>>>>>>> @@
>>>>>>> -149,7
>>>>>>> +149,7
>>>>>>> @@
>>>>>>> <id
>>>>>>> password-change='mu'
>>>>>>> />
>>>>>>> -->
>>>>>>> <!--
>>>>>>> IP
>>>>>>> address
>>>>>>> to
>>>>>>> bind
>>>>>>> to
>>>>>>> (default:
>>>>>>> 0.0.0.0)
>>>>>>> -->
>>>>>>> - <ip>::</ip>
>>>>>>> + <ip>0.0.0.0</ip>
>>>>>>> <!--
>>>>>>> Port
>>>>>>> to
>>>>>>> bind
>>>>>>> to,
>>>>>>> or
>>>>>>> 0 to
>>>>>>> disable
>>>>>>> unencrypted
>>>>>>> access
>>>>>>> to
>>>>>>> the
>>>>>>> server
>>>>>>> (default:
>>>>>>> 5222)
>>>>>>> -->
>>>>>>> @@
>>>>>>> -301,7
>>>>>>> +301,7
>>>>>>> @@
>>>>>>> the
>>>>>>> following
>>>>>>> checks
>>>>>>> applied.
>>>>>>> 0
>>>>>>> disables
>>>>>>> all
>>>>>>> checks.
>>>>>>> (default:
>>>>>>> 0)
>>>>>>> -->
>>>>>>> - <interval>60</interval>
>>>>>>> + <interval>0</interval>
>>>>>>> <!--
>>>>>>> Idle
>>>>>>> connection
>>>>>>> checks.
>>>>>>> @@
>>>>>>> -319,7
>>>>>>> +319,7
>>>>>>> @@
>>>>>>> disconnected
>>>>>>> without
>>>>>>> us
>>>>>>> knowing
>>>>>>> about
>>>>>>> it.
>>>>>>> 0
>>>>>>> disables
>>>>>>> keepalives.
>>>>>>> (default:
>>>>>>> 0)
>>>>>>> -->
>>>>>>> - <keepalive>60</keepalive>
>>>>>>> + <keepalive>0</keepalive>
>>>>>>> </check>
>>>>>>> @@
>>>>>>> -348,7
>>>>>>> +348,7
>>>>>>> @@
>>>>>>> <path>/usr/lib64/jabberd</path>
>>>>>>> <!--
>>>>>>> Backend
>>>>>>> module
>>>>>>> to
>>>>>>> use
>>>>>>> -->
>>>>>>> - <module>db</module>
>>>>>>> + <module>sqlite</module>
>>>>>>> <!--
>>>>>>> Available
>>>>>>> authentication
>>>>>>> mechanisms
>>>>>>> -->
>>>>>>> <mechanisms>
>>>>>>> @@
>>>>>>> -421,7
>>>>>>> +421,7
>>>>>>> @@
>>>>>>> <!--
>>>>>>> Database
>>>>>>> username
>>>>>>> and
>>>>>>> password
>>>>>>> -->
>>>>>>> <user>jabberd2</user>
>>>>>>> - <pass>9b6d8078f992346e0537a6e5514def7ffc28374b</pass>
>>>>>>> + <pass>71d26fd8f21c6cf9660217f363613a45d3a28e9d</pass>
>>>>>>> <!--
>>>>>>> Passwords
>>>>>>> in
>>>>>>> DB
>>>>>>> may
>>>>>>> be
>>>>>>> stored
>>>>>>> in
>>>>>>> plain
>>>>>>> or
>>>>>>> hashed
>>>>>>> format
>>>>>>> -->
>>>>>>> <!--
>>>>>>> NOTE:
>>>>>>> If
>>>>>>> you
>>>>>>> are
>>>>>>> using
>>>>>>> hashed
>>>>>>> passwords,
>>>>>>> the
>>>>>>> only
>>>>>>> auth
>>>>>>> @@
>>>>>>> -456,7
>>>>>>> +456,7
>>>>>>> @@
>>>>>>> <!--
>>>>>>> Database
>>>>>>> username
>>>>>>> and
>>>>>>> password
>>>>>>> -->
>>>>>>> <user>jabberd2</user>
>>>>>>> - <pass>9b6d8078f992346e0537a6e5514def7ffc28374b</pass>
>>>>>>> + <pass>71d26fd8f21c6cf9660217f363613a45d3a28e9d</pass>
>>>>>>> </pgsql>
>>>>>>> <!--
>>>>>>> Oracle
>>>>>>> driver
>>>>>>> configuration
>>>>>>> -->
>>>>>>> @@
>>>>>>> -470,7
>>>>>>> +470,7
>>>>>>> @@
>>>>>>> <!--
>>>>>>> Database
>>>>>>> username
>>>>>>> and
>>>>>>> password
>>>>>>> -->
>>>>>>> <user>jabberd2</user>
>>>>>>> - <pass>9b6d8078f992346e0537a6e5514def7ffc28374b</pass>
>>>>>>> + <pass>71d26fd8f21c6cf9660217f363613a45d3a28e9d</pass>
>>>>>>> </oracle>
>>>>>>> <!--
>>>>>>> Berkeley
>>>>>>> DB
>>>>>>> module
>>>>>>> configuration
>>>>>>> -->
>>>>>>> @@
>>>>>>> -543,7
>>>>>>> +543,7
>>>>>>> @@
>>>>>>> <!--
>>>>>>> base
>>>>>>> DN
>>>>>>> of
>>>>>>> the
>>>>>>> tree.
>>>>>>> You
>>>>>>> should
>>>>>>> specify
>>>>>>> a DN
>>>>>>> for
>>>>>>> each
>>>>>>> authentication
>>>>>>> realm
>>>>>>> declared
>>>>>>> in
>>>>>>> the
>>>>>>> <local/>
>>>>>>> section
>>>>>>> above,
>>>>>>> by
>>>>>>> using
>>>>>>> the
>>>>>>> realm
>>>>>>> attribute.
>>>>>>> -->
>>>>>>> - <basedn
>>>>>>> realm="company">o=Company.com</basedn>
>>>>>>> + <basedn
>>>>>>> realm='company'>o=Company.com</basedn>
>>>>>>> <basedn>o=Example
>>>>>>> Corp.</basedn>
>>>>>>> </ldapfull>
>>>>>>> @@
>>>>>>> -605,7
>>>>>>> +605,7
>>>>>>> @@
>>>>>>> <!--
>>>>>>> base
>>>>>>> DN
>>>>>>> of
>>>>>>> the
>>>>>>> tree.
>>>>>>> You
>>>>>>> should
>>>>>>> specify
>>>>>>> a DN
>>>>>>> for
>>>>>>> each
>>>>>>> authentication
>>>>>>> realm
>>>>>>> declared
>>>>>>> in
>>>>>>> the
>>>>>>> <local/>
>>>>>>> section
>>>>>>> above,
>>>>>>> by
>>>>>>> using
>>>>>>> the
>>>>>>> realm
>>>>>>> attribute.
>>>>>>> -->
>>>>>>> - <basedn
>>>>>>> realm="company">o=Company.com</basedn>
>>>>>>> + <basedn
>>>>>>> realm='company'>o=Company.com</basedn>
>>>>>>> <basedn>o=Example
>>>>>>> Corp.</basedn>
>>>>>>> </ldap>
>>>>>>> <!--
>>>>>>> if
>>>>>>> you
>>>>>>> want
>>>>>>> to
>>>>>>> configure
>>>>>>> more
>>>>>>> than
>>>>>>> one
>>>>>>> LDAP
>>>>>>> server
>>>>>>> @@
>>>>>>> -623,6
>>>>>>> +623,7
>>>>>>> @@
>>>>>>> </authreg>
>>>>>>> -</c2s><!--
>>>>>>> +</c2s>
>>>>>>> +<!--
>>>>>>> vim:
>>>>>>> syntax=xml
>>>>>>> -->
>>>>>>>
>>>>>>> Thanks
>>>>>>> for
>>>>>>> your
>>>>>>> time
>>>>>>> and
>>>>>>> support.
>>>>>>> Regards.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> 2013/12/11
>>>>>>> Balint
>>>>>>> Szigeti
>>>>>>> <balint.szgt at gmail.com
>>>>>>> <mailto:balint.szgt at gmail.com>>
>>>>>>>
>>>>>>> How
>>>>>>> was
>>>>>>> the
>>>>>>> upgrade?
>>>>>>> Which
>>>>>>> version
>>>>>>> to
>>>>>>> where?
>>>>>>>
>>>>>>> Does
>>>>>>> client
>>>>>>> use
>>>>>>> the
>>>>>>> same
>>>>>>> version
>>>>>>> as
>>>>>>> server?
>>>>>>> Wasn't
>>>>>>> there
>>>>>>> SSL
>>>>>>> regenerating?
>>>>>>>
>>>>>>> Balint
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On
>>>>>>> 11/12/13
>>>>>>> 12:48,
>>>>>>> Net
>>>>>>> Warrior
>>>>>>> wrote:
>>>>>>>
>>>>>>> Hi
>>>>>>> guys.
>>>>>>>
>>>>>>> I'm
>>>>>>> seeing
>>>>>>> this
>>>>>>> errors
>>>>>>> on
>>>>>>> the
>>>>>>> server
>>>>>>> logs
>>>>>>> after
>>>>>>> I upgraded
>>>>>>> my
>>>>>>> system:
>>>>>>> 2013/12/11
>>>>>>> 09:36:36
>>>>>>> -03:00
>>>>>>> 27397
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.__init__
>>>>>>> 2013/12/11
>>>>>>> 09:36:36
>>>>>>> -03:00
>>>>>>> 27397
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.connect('Server
>>>>>>> did
>>>>>>> not
>>>>>>> return
>>>>>>> a <features
>>>>>>> />
>>>>>>> stanza,
>>>>>>> reconnecting',)
>>>>>>> 2013/12/11
>>>>>>> 09:36:37
>>>>>>> -03:00
>>>>>>> 27397
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.connect('Server
>>>>>>> did
>>>>>>> not
>>>>>>> return
>>>>>>> a <features
>>>>>>> />
>>>>>>> stanza,
>>>>>>> reconnecting',)
>>>>>>> 2013/12/11
>>>>>>> 09:36:38
>>>>>>> -03:00
>>>>>>> 27397
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.connect('Server
>>>>>>> did
>>>>>>> not
>>>>>>> return
>>>>>>> a <features
>>>>>>> />
>>>>>>> stanza,
>>>>>>> reconnecting',)
>>>>>>> 2013/12/11
>>>>>>> 09:36:39
>>>>>>> -03:00
>>>>>>> 27397
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.connect('ERROR',
>>>>>>> 'Not
>>>>>>> able
>>>>>>> to
>>>>>>> reconnect')
>>>>>>> 2013/12/11
>>>>>>> 09:36:39
>>>>>>> -03:00
>>>>>>> 27397
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.print_message('SSLError',)
>>>>>>> 2013/12/11
>>>>>>> 09:36:39
>>>>>>> -03:00
>>>>>>> 27397
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.print_message('Could
>>>>>>> not
>>>>>>> connect
>>>>>>> to
>>>>>>> jabber
>>>>>>> server',
>>>>>>> 'spacewalk.domain.com
>>>>>>> <http://spacewalk.domain.com/>')
>>>>>>> 2013/12/11
>>>>>>> 09:36:39
>>>>>>> -03:00
>>>>>>> 27397
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.setup_connection('ERROR',
>>>>>>> 'Traceback
>>>>>>> (most
>>>>>>> recent
>>>>>>> call
>>>>>>> last):\n
>>>>>>> File
>>>>>>> "/usr/share/rhn/osad/jabber_lib.py",
>>>>>>> line
>>>>>>> 252,
>>>>>>> in
>>>>>>> setup_connection\n
>>>>>>> c
>>>>>>> = self._get_jabber_client(js)\n
>>>>>>> File
>>>>>>> "/usr/share/rhn/osad/jabber_lib.py",
>>>>>>> line
>>>>>>> 309,
>>>>>>> in
>>>>>>> _get_jabber_client\n
>>>>>>> c.connect()\n
>>>>>>> File
>>>>>>> "/usr/share/rhn/osad/jabber_lib.py",
>>>>>>> line
>>>>>>> 589,
>>>>>>> in
>>>>>>> connect\n
>>>>>>> raise
>>>>>>> SSLDisabledError\nSSLDisabledError\n')
>>>>>>> 2013/12/11
>>>>>>> 09:36:39
>>>>>>> -03:00
>>>>>>> 27397
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.setup_connection('Could
>>>>>>> not
>>>>>>> connect
>>>>>>> to
>>>>>>> any
>>>>>>> jabber
>>>>>>> server',)
>>>>>>> 2013/12/11
>>>>>>> 09:36:39
>>>>>>> -03:00
>>>>>>> 27397
>>>>>>> 0.0.0.0
>>>>>>> <http://0.0.0.0/>:
>>>>>>> osad/jabber_lib.main('Unable
>>>>>>> to
>>>>>>> connect
>>>>>>> to
>>>>>>> jabber
>>>>>>> servers,
>>>>>>> sleeping
>>>>>>> 10
>>>>>>> seconds',)
>>>>>>>
>>>>>>> It
>>>>>>> seems
>>>>>>> SSL
>>>>>>> was
>>>>>>> disabled
>>>>>>> and
>>>>>>> no
>>>>>>> c2s
>>>>>>> service
>>>>>>> is
>>>>>>> started
>>>>>>> at
>>>>>>> all
>>>>>>> in
>>>>>>> port
>>>>>>> 5222,
>>>>>>> It
>>>>>>> seems
>>>>>>> there
>>>>>>> were
>>>>>>> lots
>>>>>>> of
>>>>>>> modifications
>>>>>>> in
>>>>>>> the
>>>>>>> c2s.xml
>>>>>>> but
>>>>>>> cannot
>>>>>>> tell
>>>>>>> which
>>>>>>> one
>>>>>>> is
>>>>>>> causing
>>>>>>> the
>>>>>>> error
>>>>>>> or
>>>>>>> if
>>>>>>> the
>>>>>>> certificate
>>>>>>> got
>>>>>>> corrupted,
>>>>>>> I restore
>>>>>>> the
>>>>>>> original
>>>>>>> configuration
>>>>>>> file
>>>>>>> and
>>>>>>> c2s
>>>>>>> starts,
>>>>>>> but
>>>>>>> but
>>>>>>> the
>>>>>>> clients
>>>>>>> cannot
>>>>>>> connect
>>>>>>> to
>>>>>>> jabber
>>>>>>> server
>>>>>>> anymore:
>>>>>>>
>>>>>>> 013-12-11
>>>>>>> 09:36:59
>>>>>>> jabber_lib.main:
>>>>>>> Unable
>>>>>>> to
>>>>>>> connect
>>>>>>> to
>>>>>>> jabber
>>>>>>> servers,
>>>>>>> sleeping
>>>>>>> 108
>>>>>>> seconds
>>>>>>> 2013-12-11
>>>>>>> 09:38:50
>>>>>>> jabber_lib.main:
>>>>>>> Unable
>>>>>>> to
>>>>>>> connect
>>>>>>> to
>>>>>>> jabber
>>>>>>> servers,
>>>>>>> sleeping
>>>>>>> 119
>>>>>>> seconds
>>>>>>> 2013-12-11
>>>>>>> 09:40:53
>>>>>>> jabber_lib.main:
>>>>>>> Unable
>>>>>>> to
>>>>>>> connect
>>>>>>> to
>>>>>>> jabber
>>>>>>> servers,
>>>>>>> sleeping
>>>>>>> 109
>>>>>>> seconds
>>>>>>> 2013-12-11
>>>>>>> 09:42:45
>>>>>>> jabber_lib.main:
>>>>>>> Unable
>>>>>>> to
>>>>>>> connect
>>>>>>> to
>>>>>>> jabber
>>>>>>> servers,
>>>>>>> sleeping
>>>>>>> 68
>>>>>>> seconds
>>>>>>> 2013-12-11
>>>>>>> 09:43:56
>>>>>>> jabber_lib.main:
>>>>>>> Unable
>>>>>>> to
>>>>>>> connect
>>>>>>> to
>>>>>>> jabber
>>>>>>> servers,
>>>>>>> sleeping
>>>>>>> 71
>>>>>>> seconds
>>>>>>> 2013-12-11
>>>>>>> 09:45:10
>>>>>>> jabber_lib.main:
>>>>>>> Unable
>>>>>>> to
>>>>>>> connect
>>>>>>> to
>>>>>>> jabber
>>>>>>> servers,
>>>>>>> sleeping
>>>>>>> 110
>>>>>>> seconds
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Any
>>>>>>> help
>>>>>>> appreciated.
>>>>>>> Regards
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Spacewalk-list
>>>>>>> mailing
>>>>>>> list
>>>>>>> Spacewalk-list at redhat.com
>>>>>>> <mailto:Spacewalk-list at redhat.com>
>>>>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Spacewalk-list
>>>>>>> mailing
>>>>>>> list
>>>>>>> Spacewalk-list at redhat.com
>>>>>>> <mailto:Spacewalk-list at redhat.com>
>>>>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Spacewalk-list mailing list
>>>>>>> Spacewalk-list at redhat.com <mailto:Spacewalk-list at redhat.com>
>>>>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Spacewalk-list
>>>>>> mailing
>>>>>> list
>>>>>> Spacewalk-list at redhat.com
>>>>>> <mailto:Spacewalk-list at redhat.com>
>>>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Spacewalk-list mailing list
>>>>>> Spacewalk-list at redhat.com <mailto:Spacewalk-list at redhat.com>
>>>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Spacewalk-list
>>>>> mailing list
>>>>> Spacewalk-list at redhat.com
>>>>> <mailto:Spacewalk-list at redhat.com>
>>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
>>>>>
>>>>>
>>>>> 1 - After
>>>>> the
>>>>> upgrade
>>>>> from
>>>>> CentOS 6.4
>>>>> to 6.5,
>>>>> did
>>>>> SELinux or
>>>>> iptables
>>>>> turn
>>>>> itself
>>>>> back on?
>>>>>
>>>>> 2 -
>>>>> service
>>>>> statuses
>>>>> spacewalk-service
>>>>> status
>>>>>
>>>>> ...
>>>>> sm (pid
>>>>> 17446) is
>>>>> running...
>>>>> c2s (pid
>>>>> 17453) is
>>>>> running...
>>>>> s2s (pid
>>>>> 17460) is
>>>>> running...
>>>>> osa-dispatcher
>>>>> (pid
>>>>> 17663) is
>>>>> running...
>>>>> ...(plus
>>>>> others of
>>>>> course)
>>>>>
>>>>> If those
>>>>> services
>>>>> are not
>>>>> all
>>>>> running,
>>>>> do the
>>>>> following:
>>>>> spacewalk-service
>>>>> stop
>>>>> rm -rf
>>>>> /var/lib/jabberd/db/*"
>>>>> #(back it
>>>>> up if you
>>>>> want, it's
>>>>> stale and
>>>>> is
>>>>> regenerated if
>>>>> missing.
>>>>> Do not
>>>>> delete the
>>>>> db folder
>>>>> itself,
>>>>> though.)
>>>>> spacewalk-service
>>>>> start
>>>>>
>>>>>
>>>>> 3 - Check
>>>>> the
>>>>> permissions on
>>>>> your
>>>>> jabberd stuff:
>>>>> ls -lah
>>>>> /var/lib/jabberd/*
>>>>>
>>>>> and for
>>>>> good measure:
>>>>> chown -R
>>>>> jabber:jabber
>>>>> /var/lib/jabberd
>>>>>
>>>>> _______________________________________________
>>>>> Spacewalk-list
>>>>> mailing list
>>>>> Spacewalk-list at redhat.com
>>>>> <mailto:Spacewalk-list at redhat.com>
>>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Spacewalk-list
>>>>> mailing list
>>>>> Spacewalk-list at redhat.com
>>>>> <mailto:Spacewalk-list at redhat.com>
>>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
>>>>>
>>>>>
>>>>>
>>>>> Any reason why it says
>>>>> it is looking for
>>>>> spacewalk.domain.com
>>>>> <http://spacewalk.domain.com>?
>>>>>
>>>>>
>>>>> "2013/12/11 16:08:00
>>>>> -03:00 21592 0.0.0.0
>>>>> <http://0.0.0.0>:
>>>>> osad/jabber_lib.print_message('Could
>>>>> not connect to jabber
>>>>> server',
>>>>> 'spacewalk.domain.com
>>>>> <http://spacewalk.domain.com>')"
>>>>>
>>>>> Please paste the
>>>>> output of :
>>>>>
>>>>> grep -R
>>>>> spacewalk.domain.com
>>>>> <http://spacewalk.domain.com>
>>>>> /etc/jabberd/*
>>>>>
>>>>> _______________________________________________
>>>>> Spacewalk-list mailing
>>>>> list
>>>>> Spacewalk-list at redhat.com
>>>>> <mailto:Spacewalk-list at redhat.com>
>>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Spacewalk-list mailing list
>>>>> Spacewalk-list at redhat.com <mailto:Spacewalk-list at redhat.com>
>>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
>>>>
>>>>
>>>> _______________________________________________
>>>> Spacewalk-list mailing list
>>>> Spacewalk-list at redhat.com
>>>> <mailto:Spacewalk-list at redhat.com>
>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Spacewalk-list mailing list
>>>> Spacewalk-list at redhat.com <mailto:Spacewalk-list at redhat.com>
>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
>>>
>>>
>>> _______________________________________________
>>> Spacewalk-list mailing list
>>> Spacewalk-list at redhat.com
>>> <mailto:Spacewalk-list at redhat.com>
>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Spacewalk-list mailing list
>>> Spacewalk-list at redhat.com <mailto:Spacewalk-list at redhat.com>
>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
>>
>>
>> _______________________________________________
>> Spacewalk-list mailing list
>> Spacewalk-list at redhat.com
>> <mailto:Spacewalk-list at redhat.com>
>> https://www.redhat.com/mailman/listinfo/spacewalk-list
>>
>>
>>
>>
>> _______________________________________________
>> Spacewalk-list mailing list
>> Spacewalk-list at redhat.com <mailto:Spacewalk-list at redhat.com>
>> https://www.redhat.com/mailman/listinfo/spacewalk-list
>
>
> _______________________________________________
> Spacewalk-list mailing list
> Spacewalk-list at redhat.com
> <mailto:Spacewalk-list at redhat.com>
> https://www.redhat.com/mailman/listinfo/spacewalk-list
>
>
>
>
>
>
>
>
> _______________________________________________
> Spacewalk-list mailing list
> Spacewalk-list at redhat.com
> https://www.redhat.com/mailman/listinfo/spacewalk-list
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/spacewalk-list/attachments/20131213/1640847e/attachment.htm>
More information about the Spacewalk-list
mailing list