[Spacewalk-list] Kickstart Auto Client Registaration - UPDATED
Net Warrior
netwarrior863 at gmail.com
Wed Nov 27 17:21:24 UTC 2013
El 26/11/13 23:28, Lupin Deterd escribió:
> Don't add the Update channel as child on your KS, add the epel and
> spacewalk client as child there, then on Activation key you can add
> the Update and other channels.
>
>
> On Wed, Nov 27, 2013 at 3:34 AM, Net Warrior <netwarrior863 at gmail.com
> <mailto:netwarrior863 at gmail.com>> wrote:
>
> Hi,
>
> Finally I found that there were no GPG key being imported, now I do
> not see the NOKEY error anymore, so this is good, now the problem I
> have is the following.
>
> It complains about a dependency, the centos base channel has
> libxml2-2.7.6-8.el6_3.4.x86_64, so when trying to install a newer
> version it breaks, I do not know from which repo the new library is
> being downloaded, I guess than from updates.
>
> Reading this thread
> http://osdir.com/ml/spacewalk-list/2013-06/msg00090.html the user has
> similar issues, and someone recommended to include only the base repo
> during the install.
> I did that, under operating systems tab I selected no child channel
> selected, I also removed the activation key associated with the KS,
> but still the newer library version is being downloaded.
>
> These are the libraries installed during the process:
> rpm -qa|grep libxml
> libxml2-2.7.6-8.el6_3.4.x86_64
> libxml2-python-2.7.6-8.el6_3.4.x86_64
>
>
> How can solve this issue?
> Thanks in advanced.
> Best regards.
>
>
>
> 2013/11/14, Lupin Deterd <lupindeterd at gmail.com
> <mailto:lupindeterd at gmail.com>>:
> > Downloaded: 3 files, 596K in 0.05s (11.1 MB/s)
> > warning: /tmp/rhn_rpms/optional/
> > pyOpenSSL-0.10-2.el6.x86_64.rpm:
> > Header V3 RSA/SHA256 Signature, key ID c105b9de: NOKEY
> > warning: /tmp/rhn_rpms/optional/rhnlib-2.5.65-1.el6.noarch.rpm:
> Header
> > V4 DSA/SHA1 Signature, key ID 863a853d: NOKEY
> > error: Failed dependencies:
> > libxml2 = 2.7.6-12.el6_4.1 is needed by
> > libxml2-python-2.7.6-12.el6_4.1.x86_64
> >
> >
> > Those rhn-setup package deps that were not satisfied, it was
> downloaded I
> > think from your epel channel but your epel channel GPG key isn't
> tied to
> > your ks profile and that caused it not being installed.
> >
> >
> > On Fri, Nov 15, 2013 at 7:07 AM, Net Warrior
> > <netwarrior863 at gmail.com <mailto:netwarrior863 at gmail.com>>wrote:
> >
> >> Did that and I see the same files under /root with the same errors
> >> and the temporal scripts under /tmp with the same errors, no more
> >> verbose than before.
> >>
> >> the last lines of ks-rhn-post.log
> >> FINISHED --2013-11-14 12:30:36--
> >>
> >> Downloaded: 3 files, 596K in 0.05s (11.1 MB/s)
> >> warning: /tmp/rhn_rpms/optional/pyOpenSSL-0.10-2.el6.x86_64.rpm:
> >> Header V3 RSA/SHA256 Signature, key ID c105b9de: NOKEY
> >> warning: /tmp/rhn_rpms/optional/rhnlib-2.5.65-1.el6.noarch.rpm:
> Header
> >> V4 DSA/SHA1 Signature, key ID 863a853d: NOKEY
> >> error: Failed dependencies:
> >> libxml2 = 2.7.6-12.el6_4.1 is needed by
> >> libxml2-python-2.7.6-12.el6_4.1.x86_64
> >> Can't open /etc/sysconfig/rhn/up2date: No such file or directory.
> >> cp: cannot stat `/tmp/ks-tree-copy/*': No such file or directory
> >> --2013-11-14 12:30:36--
> http://spacewalk/pub/RHN-ORG-TRUSTED-SSL-CERT
> >> Resolving spacewalk... 128.2.101.107
> >> Connecting to spacewalk|128.2.101.107|:80... connected.
> >> HTTP request sent, awaiting response... 200 OK
> >> Length: 5217 (5.1K) [text/plain]
> >> Saving to: `/usr/share/rhn/RHN-ORG-TRUSTED-SSL-CERT'
> >>
> >> 0K ..... 100%
> >> 25.6M=0s
> >>
> >> 2013-11-14 12:30:36 (25.6 MB/s) -
> >> `/usr/share/rhn/RHN-ORG-TRUSTED-SSL-CERT' saved [5217/5217]
> >>
> >> Can't open /etc/sysconfig/rhn/*: No such file or directory.
> >> /tmp/ks-script-m2hytA: line 135: rhnreg_ks: command not found
> >> /tmp/ks-script-m2hytA: line 141: rhn_check: command not found
> >>
> >> Under tmp those packages that could not be installed.
> >>
> >> [root at slnxserver ~]# ls /tmp/rhn_rpms/optional/
> >> libxml2-python-2.7.6-12.el6_4.1.x86_64.rpm
> >> pyOpenSSL-0.10-2.el6.x86_64.rpm rhnlib-2.5.65-1.el6.noarch.rpm
> >>
> >> Still do not undestand in which part of the process the rhn-xxx
> >> packages are installed.
> >> I can see from the script in /tmp that the certificate is
> copied, then
> >> it tries to install by calling
> >> rhnreg_ks but obviously the package is not installed, still cannot
> >> realize what the problem is.
> >>
> >>
> >> # begin Red Hat management server registration
> >> mkdir -p /usr/share/rhn/
> >> wget http://spacewalk/pub/RHN-ORG-TRUSTED-SSL-CERT -O
> >> /usr/share/rhn/RHN-ORG-TRUSTED-SSL-CERT
> >> perl -npe 's/RHNS-CA-CERT/RHN-ORG-TRUSTED-SSL-CERT/g' -i
> >> /etc/sysconfig/rhn/*
> >> if [ -f /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release ]; then
> >> rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
> >> fi
> >> key=""
> >> if [ -f /tmp/key ]; then
> >> key=`cat /tmp/key`
> >> fi
> >>
> >>
> >> rhnreg_ks --serverUrl=https://spacewalk/XMLRPC
> >> --sslCACert=/usr/share/rhn/RHN-ORG-TRUSTED-SSL-CERT
> >>
> >>
> --activationkey=1-c3d592fc62a5eec7a23464fd109d8cb6,1-02e7348b884906689e4b29cc2b834a48,1-e57b50e187c3caafda18a1a90224e75a
> >> fi
> >>
> >>
> >> Thanks for your time and support
> >> Regards.
> >>
> >> 2013/11/14, Lupin Deterd <lupindeterd at gmail.com
> <mailto:lupindeterd at gmail.com>>:
> >> > No, under KS Profile->Kickstart Details, check the
> >> > Log custom post script
> >> > Log custom pre script
> >> > Preserve ks.cfg
> >> >
> >> > and under KS Profile->Systems Details->Troubleshooting
> >> > Enabled debugging on up2date/yum
> >> >
> >> > the later debug on will allow you to see what's going on during
> >> > kickstart
> >> > on client side.
> >> >
> >> >
> >> > On Fri, Nov 15, 2013 at 12:33 AM, Net Warrior
> >> > <netwarrior863 at gmail.com <mailto:netwarrior863 at gmail.com>>wrote:
> >> >
> >> >> I can see the GPG asociated to the ks,
> >> >> >>Did you enable the logging of your ks?
> >> >>
> >> >> How do I do that? Under System Details I have, Enable Spacewlk
> >> >> Configuration Management, Enable Spacewalk Remote Command,
> those
> >> options
> >> >> are unchecked , and in Spacewalk Profile I checked Delete the
> >> >> existing
> >> >> system profile and create a new system profile are those
> the related
> >> >> options?
> >> >>
> >> >>
> >> >> Thanks for your time and support.
> >> >> Regards.
> >> >>
> >> >>
> >> >> 2013/11/13 Lupin Deterd <lupindeterd at gmail.com
> <mailto:lupindeterd at gmail.com>>
> >> >>
> >> >>> Did you enable the logging of your ks? Did you link the gpg
> keys of
> >> your
> >> >>> child channel to your ks profile? It will not install
> packages if you
> >> >>> didn't add it there.
> >> >>>
> >> >>>
> >> >>> On Thu, Nov 14, 2013 at 2:25 AM, Net Warrior
> >> >>> <netwarrior863 at gmail.com
> <mailto:netwarrior863 at gmail.com>>wrote:
> >> >>>
> >> >>>> Hi Lupin.
> >> >>>>
> >> >>>> During install I get the same error, packages does not
> exist, I
> >> >>>> includes
> >> >>>> as you suggested those packages in the package profile and
> also
> >> >>>> under
> >> >>>> operating system, checked the spacewalk-repository and
> epe-l as
> >> >>>> well.
> >> >>>>
> >> >>>> Any way, in the profile package section it read:
> >> >>>> Note: only packages available in your Enterprise Linux
> install tree
> >> >>>> should be specified here. To install packages available in
> Spacewalk
> >> >>>> software channels, please associate an appropriate
> activation key
> >> >>>> with
> >> >>>> this
> >> >>>> kickstart profile in the Activation Keys tab.
> >> >>>>
> >> >>>> I give it a try also, created an activation key and
> asociated to the
> >> >>>> profile, and same error, package do not exists.
> >> >>>>
> >> >>>> Thanks for your time and support
> >> >>>> Regards.
> >> >>>>
> >> >>>>
> >> >>>>
> >> >>>> 2013/11/13 Lupin Deterd <lupindeterd at gmail.com
> <mailto:lupindeterd at gmail.com>>
> >> >>>>
> >> >>>>> I have the following packages on my ks profile.
> >> >>>>>
> >> >>>>>
> >> >>>>> @Base
> >> >>>>> rhn-setup
> >> >>>>> osad
> >> >>>>> rhncfg
> >> >>>>> rhncfg-actions
> >> >>>>> rhncfg-client
> >> >>>>> wget
> >> >>>>> perl
> >> >>>>>
> >> >>>>> with spacewalk-client and epel as child channels to solve
> the deps.
> >> >>>>>
> >> >>>>> Hth,
> >> >>>>>
> >> >>>>> Lupin
> >> >>>>>
> >> >>>>>
> >> >>>>> On Wed, Nov 13, 2013 at 12:19 AM, Net Warrior
> >> >>>>> <netwarrior863 at gmail.com
> <mailto:netwarrior863 at gmail.com>>wrote:
> >> >>>>>
> >> >>>>>> That's what I did, still getting the same error.
> >> >>>>>>
> >> >>>>>> In the profile, under operating system I check the spacewalk
> >> >>>>>> repository only which is a child channel of the main
> Centos-x64
> >> >>>>>> channel,
> >> >>>>>> left unchecked the other child channels, to the
> profile there
> >> >>>>>> is
> >> >>>>>> also
> >> >>>>>> associated the activation key which has te rest of the
> channels
> >> >>>>>> like
> >> >>>>>> centos-update and epel, under profile also, in the profile
> >> >>>>>> software
> >> >>>>>> properties I also have
> >> >>>>>>
> >> >>>>>> @ Base ( added by default )
> >> >>>>>> postfix
> >> >>>>>> nfs-utils
> >> >>>>>> ksh
> >> >>>>>> (Adding the rhn-setup or spacewalk-client group in here
> gives a
> >> >>>>>> package / group not found )
> >> >>>>>>
> >> >>>>>> I'm I missing something else?
> >> >>>>>> Thanks for your time and support.
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> 2013/11/10 Lupin Deterd <lupindeterd at gmail.com
> <mailto:lupindeterd at gmail.com>>
> >> >>>>>>
> >> >>>>>>> Don't put your registration packages(rhn-setup) on
> activation
> >> >>>>>>> key,
> >> >>>>>>> add in ks profile portion.
> >> >>>>>>>
> >> >>>>>>>
> >> >>>>>>> On Sunday, November 10, 2013, Net Warrior wrote:
> >> >>>>>>>
> >> >>>>>>>> El 09/11/13 16:29, Lupin Deterd escribió:
> >> >>>>>>>>
> >> >>>>>>>>> hello,
> >> >>>>>>>>>
> >> >>>>>>>>> you need rhn-setup packages on your ks profile packages.
> >> >>>>>>>>>
> >> >>>>>>>>> Make sure it is able to resolve all the dependecies
> of the
> >> >>>>>>>>> packages
> >> >>>>>>>>> that you install for registtion.
> >> >>>>>>>>>
> >> >>>>>>>>> I have the same issue and was resolve by adding epel and
> >> >>>>>>>>> spacewalk-client channel on my ks profile.
> >> >>>>>>>>>
> >> >>>>>>>>> cheers
> >> >>>>>>>>> lupin
> >> >>>>>>>>>
> >> >>>>>>>>> On Saturday, November 9, 2013, Net Warrior wrote:
> >> >>>>>>>>>
> >> >>>>>>>>> Hi guys.
> >> >>>>>>>>>
> >> >>>>>>>>> I'm having some issues while trying to register a
> client
> >> >>>>>>>>> over
> >> >>>>>>>>> kickstart methood, the client is not registered,
> and I do
> >> >>>>>>>>> not
> >> >>>>>>>>> know why
> >> >>>>>>>>> is complaining about a package depenency when the
> package
> >> >>>>>>>>> was
> >> >>>>>>>>> dowloaded already.
> >> >>>>>>>>>
> >> >>>>>>>>> I tryied include the package a part of the
> software, tried
> >> >>>>>>>>> include
> >> >>>>>>>>> both, libxml-python and libxlm but same error,
> the last
> >> >>>>>>>>> error
> >> >>>>>>>>> says
> >> >>>>>>>>> "rhnreg_ks not found" that's part of the code that is
> >> >>>>>>>>> generated
> >> >>>>>>>>> automatically ( the kickstart ) where I can see how the
> >> >>>>>>>>> registration
> >> >>>>>>>>> is preformed, but I do not see the package that
> contain the
> >> >>>>>>>>> command is
> >> >>>>>>>>> downloaded somewhere. I only see that the only
> package
> >> >>>>>>>>> that's
> >> >>>>>>>>> is want
> >> >>>>>>>>> to be installed is rhnlib.
> >> >>>>>>>>>
> >> >>>>>>>>> Any hints on this will really appreciated, maybe
> I not
> >> >>>>>>>>> following the
> >> >>>>>>>>> right procedure and of course I'm missing something.
> >> >>>>>>>>>
> >> >>>>>>>>>
> >> >>>>>>>>> Connecting to spacewalk|128.2.101.107|:80...
> connected.
> >> >>>>>>>>> HTTP request sent, awaiting response... 200 OK
> >> >>>>>>>>> Length: 328816 (321K) [application/octet-stream]
> >> >>>>>>>>> Saving to:
> >> >>>>>>>>> `/tmp/rhn_rpms/optional/libxml2-python-2.7.6-12.el6_4.
> >> >>>>>>>>> 1.x86_64.rpm'
> >> >>>>>>>>>
> >> >>>>>>>>> 0K .......... .......... .......... ..........
> >> ..........
> >> >>>>>>>>> 15%
> >> >>>>>>>>> 11.8M 0s
> >> >>>>>>>>> 50K .......... .......... .......... ..........
> >> ..........
> >> >>>>>>>>> 31%
> >> >>>>>>>>> 11.0M 0s
> >> >>>>>>>>> 100K .......... .......... .......... ..........
> >> ..........
> >> >>>>>>>>> 46%
> >> >>>>>>>>> 10.3M 0s
> >> >>>>>>>>> 150K .......... .......... .......... ..........
> >> ..........
> >> >>>>>>>>> 62%
> >> >>>>>>>>> 11.3M 0s
> >> >>>>>>>>> 200K .......... .......... .......... ..........
> >> ..........
> >> >>>>>>>>> 77%
> >> >>>>>>>>> 10.9M 0s
> >> >>>>>>>>> 250K .......... .......... .......... ..........
> >> ..........
> >> >>>>>>>>> 93%
> >> >>>>>>>>> 11.3M 0s
> >> >>>>>>>>> 300K .......... .......... . 100% 10.9M=0.03s
> >> >>>>>>>>>
> >> >>>>>>>>> 2013-11-07 18:26:11 (11.1 MB/s) -
> >> >>>>>>>>> `/tmp/rhn_rpms/optional/libxml2-python-2.7.6-12.el6_4.
> >> >>>>>>>>> 1.x86_64.rpm'
> >> >>>>>>>>> saved [328816/328816]
> >> >>>>>>>>>
> >> >>>>>>>>> --2013-11-07 18:26:11--
> >> >>>>>>>>> http://spacewalk/download/package/
> >> >>>>>>>>>
> 47afc36f888ddfc2450660e6ee490c8700928b5e/0/1/17834/rhnlib-2.
> >> >>>>>>>>> 5.65-1.el6.noarch.rpm
> >> >>>>>>>>> Reusing existing connection to spacewalk:80.
> >> >>>>>>>>> HTTP request sent, awaiting response... 200 OK
> >> >>>>>>>>> Length: 65208 (64K) [application/octet-stream]
> >> >>>>>>>>> Saving to:
> >> `/tmp/rhn_rpms/optional/rhnlib-2.5.65-1.el6.noarch.
> >> >>>>>>>>> rpm'
> >> >>>>>>>>>
> >> >>>>>>>>> 0K .......... .......... .......... ..........
> >> ..........
> >> >>>>>>>>> 78%
> >> >>>>>>>>> 11.6M 0s
> >> >>>>>>>>> 50K .......... ... 100% 11.4M=0.005s
> >> >>>>>>>>>
> >> >>>>>>>>> 2013-11-07 18:26:11 (11.6 MB/s) -
> >> >>>>>>>>> `/tmp/rhn_rpms/optional/rhnlib-2.5.65-1.el6.noarch.rpm'
> >> >>>>>>>>> saved
> >> >>>>>>>>> [65208/65208]
> >> >>>>>>>>>
> >> >>>>>>>>> --2013-11-07 18:26:11--
> >> >>>>>>>>> http://spacewalk/download/package/
> >> >>>>>>>>>
> 2c1c80089288e8f2ef90ed729d798fe0bd67b980/0/1/7256/pyOpenSSL-
> >> >>>>>>>>> 0.10-2.el6.x86_64.rpm
> >> >>>>>>>>> Reusing existing connection to spacewalk:80.
> >> >>>>>>>>> HTTP request sent, awaiting response... 200 OK
> >> >>>>>>>>> Length: 216752 (212K) [application/octet-stream]
> >> >>>>>>>>> Saving to:
> >> >>>>>>>>> `/tmp/rhn_rpms/optional/pyOpenSSL-0.10-2.el6.x86_64.
> >> >>>>>>>>> rpm'
> >> >>>>>>>>>
> >> >>>>>>>>> 0K .......... .......... .......... ..........
> >> ..........
> >> >>>>>>>>> 23%
> >> >>>>>>>>> 11.6M 0s
> >> >>>>>>>>> 50K .......... .......... .......... ..........
> >> ..........
> >> >>>>>>>>> 47%
> >> >>>>>>>>> 10.9M 0s
> >> >>>>>>>>> 100K .......... .......... .......... ..........
> >> ..........
> >> >>>>>>>>> 70%
> >> >>>>>>>>> 10.2M 0s
> >> >>>>>>>>> 150K .......... .......... .......... ..........
> >> ..........
> >> >>>>>>>>> 94%
> >> >>>>>>>>> 11.2M 0s
> >> >>>>>>>>> 200K .......... . 100% 11.3M=0.02s
> >> >>>>>>>>>
> >> >>>>>>>>> 2013-11-07 18:26:11 (11.0 MB/s) -
> >> >>>>>>>>> `/tmp/rhn_rpms/optional/pyOpenSSL-0.10-2.el6.x86_64.rpm'
> >> saved
> >> >>>>>>>>> [216752/216752]
> >> >>>>>>>>>
> >> >>>>>>>>> FINISHED --2013-11-07 18:26:11--
> >> >>>>>>>>> Downloaded: 3 files, 596K in 0.05s (11.1 MB/s)
> >> >>>>>>>>> warning:
> >> >>>>>>>>> /tmp/rhn_rpms/optional/pyOpenSSL-0.10-2.el6.x86_64.
> >> >>>>>>>>> rpm:
> >> >>>>>>>>> Header V3 RSA/SHA256 Signature, key ID c105b9de:
> NOKEY
> >> >>>>>>>>> warning:
> >> >>>>>>>>> /tmp/rhn_rpms/optional/rhnlib-2.5.65-1.el6.noarch.rpm:
> >> >>>>>>>>> Header
> >> >>>>>>>>> V4 DSA/SHA1 Signature, key ID 863a853d: NOKEY
> >> >>>>>>>>> error: Failed dependencies:
> >> >>>>>>>>> libxml2 = 2.7.6-12.el6_4.1 is needed by
> >> >>>>>>>>> libxml2-python-2.7.6-12.el6_4.1.x86_64
> >> >>>>>>>>> Can't op Spacewalk-list at redhat.com
> <mailto:Spacewalk-list at redhat.com> <javascript:;>
> >> >>>>>>>>>
> >> >>>>>>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
> >> >>>>>>>>>
> >> >>>>>>>>>
> >> >>>>>>>>>
> >> >>>>>>>>> _______________________________________________
> >> >>>>>>>>> Spacewalk-list mailing list
> >> >>>>>>>>> Spacewalk-list at redhat.com
> <mailto:Spacewalk-list at redhat.com>
> >> >>>>>>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
> >> >>>>>>>>>
> >> >>>>>>>> I did that, maybe I'm missing somthing else, I found
> similar
> >> >>>>>>>> cases
> >> >>>>>>>> on the list, I tried most of theirs suggestions but
> still having
> >> the
> >> >>>>>>>> same
> >> >>>>>>>> error.
> >> >>>>>>>> I have the activation key asociated to the child channels
> >> including
> >> >>>>>>>> the centos updates , epel and spacewalk client, I also
> checked
> >> >>>>>>>> under
> >> >>>>>>>> operating system options those channels eventhough I
> found that
> >> are
> >> >>>>>>>> overrriden by the activation key but I did it anyway
> just to
> >> >>>>>>>> give
> >> it
> >> >>>>>>>> a try.
> >> >>>>>>>> I also added the packages in the ks packages section,
> where I
> >> >>>>>>>> also
> >> >>>>>>>> install for example nfs-utils package which I use to
> copy some
> >> >>>>>>>> config files
> >> >>>>>>>> during the ks process over nfs, that goes fine, the
> package is
> >> >>>>>>>> installed
> >> >>>>>>>> and I can make the copy.
> >> >>>>>>>>
> >> >>>>>>>> If I add the @space walk group I get that the group
> does not
> >> exist,
> >> >>>>>>>> If I add the individuals packages, like rhn-clients
> and the
> >> >>>>>>>> like,
> >> (
> >> >>>>>>>> also
> >> >>>>>>>> found that suggestion on the list ) during the
> installation I
> >> >>>>>>>> get
> >> >>>>>>>> the
> >> >>>>>>>> error that the packages cannot be found.
> >> >>>>>>>>
> >> >>>>>>>> So, I'm lost, maybe I'm missing something else.
> >> >>>>>>>>
> >> >>>>>>>> Thanks for your time and support.
> >> >>>>>>>> Regards
> >> >>>>>>>>
> >> >>>>>>>> _______________________________________________
> >> >>>>>>>> Spacewalk-list mailing list
> >> >>>>>>>> Spacewalk-list at redhat.com
> <mailto:Spacewalk-list at redhat.com>
> >> >>>>>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
> >> >>>>>>>>
> >> >>>>>>>
> >> >>>>>>> _______________________________________________
> >> >>>>>>> Spacewalk-list mailing list
> >> >>>>>>> Spacewalk-list at redhat.com
> <mailto:Spacewalk-list at redhat.com>
> >> >>>>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
> >> >>>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> _______________________________________________
> >> >>>>>> Spacewalk-list mailing list
> >> >>>>>> Spacewalk-list at redhat.com <mailto:Spacewalk-list at redhat.com>
> >> >>>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
> >> >>>>>>
> >> >>>>>
> >> >>>>>
> >> >>>>> _______________________________________________
> >> >>>>> Spacewalk-list mailing list
> >> >>>>> Spacewalk-list at redhat.com <mailto:Spacewalk-list at redhat.com>
> >> >>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
> >> >>>>>
> >> >>>>
> >> >>>>
> >> >>>> _______________________________________________
> >> >>>> Spacewalk-list mailing list
> >> >>>> Spacewalk-list at redhat.com <mailto:Spacewalk-list at redhat.com>
> >> >>>> https://www.redhat.com/mailman/listinfo/spacewalk-list
> >> >>>>
> >> >>>
> >> >>>
> >> >>> _______________________________________________
> >> >>> Spacewalk-list mailing list
> >> >>> Spacewalk-list at redhat.com <mailto:Spacewalk-list at redhat.com>
> >> >>> https://www.redhat.com/mailman/listinfo/spacewalk-list
> >> >>>
> >> >>
> >> >>
> >> >> _______________________________________________
> >> >> Spacewalk-list mailing list
> >> >> Spacewalk-list at redhat.com <mailto:Spacewalk-list at redhat.com>
> >> >> https://www.redhat.com/mailman/listinfo/spacewalk-list
> >> >>
> >> >
> >>
> >> _______________________________________________
> >> Spacewalk-list mailing list
> >> Spacewalk-list at redhat.com <mailto:Spacewalk-list at redhat.com>
> >> https://www.redhat.com/mailman/listinfo/spacewalk-list
> >>
> >
>
> _______________________________________________
> Spacewalk-list mailing list
> Spacewalk-list at redhat.com <mailto:Spacewalk-list at redhat.com>
> https://www.redhat.com/mailman/listinfo/spacewalk-list
>
>
>
>
> _______________________________________________
> Spacewalk-list mailing list
> Spacewalk-list at redhat.com
> https://www.redhat.com/mailman/listinfo/spacewalk-list
Hi,
I did that, same behaviour, in the KS I also tried only base channel
and NO child channel at all as I found in the mail thread I mention,
along with that, I also
asociated the activation key to the KS with only the spacewalk, epel and
update channels, I also removed the activation key asociation from the
KS leaving only
the base channel under operating systems options, no matter what I try,
the new library is downloaded which conflicts with the older version
that's installed.
I created a new profile just to test, and the KS autogerated created the
links which perform the wget and downlads the new libraries also, so do
not know why is linking to the new instead to the base centos repo which
has the old library version but seems to be something in the configuration.
Do not know what else to try.
Thanks for your time and support
Regards
More information about the Spacewalk-list
mailing list