[Thincrust-devel] ec2-creator merge into appliance-tools

Tue Aug 26 16:39:15 UTC 2008

Joey Boggs wrote:
> I've made the merge of ec2-conversion-tools with the appliance-tools. 
> Once Huff has reviewed and pushed the changes they will be live at:  
> http://git.et.redhat.com/?p=act.git;a=summary Another announcement will 
> be made when the changes are public.

Joey:

I tried the tools, doing the following:

1) Used appliance creator to build an image (with ace in it) based on 
the ec2Appliance manifest. This is configured with iptables off, selinux 
off, sshd enabled, and the ace-console installed.

2) I packaged it using the ec2-converter. No errors.

3) I did an ec2-bundle-image and then an ec2-upload-image and finally an 
ec2-register. The resulting ami (public) is ami-f1f51198.

If i launche the image from (1), I can ssh in from my local machine. No 
issues. If I launch the result of (3) I get the console output below. I 
can not ssh or attach to the ace-console at port 3000.

Any ideas?

-- bk

Linux version 2.6.16-xenU (builder at xenbat.amazonsa) (gcc version 4.0.1 
20050727 (Red Hat 4.0.1-5)) #1 SMP Mon May 28 03:41:49 SAST 2007
BIOS-provided physical RAM map:
  Xen: 0000000000000000 - 000000006a400000 (usable)
980MB HIGHMEM available.
727MB LOWMEM available.
NX (Execute Disable) protection: active
IRQ lockup detection disabled
Built 1 zonelists
Kernel command line:  root=/dev/sda1 ro 4
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Xen reported: 2600.000 MHz processor.
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: ee000000-f53fe000, maxmem 2d7fe000
Memory: 1718700k/1748992k available (1958k kernel code, 20948k reserved, 
620k data, 144k init, 1003528k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5201.45 BogoMIPS 
(lpj=26007296)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Checking 'hlt' instruction... OK.
Brought up 1 CPUs
migration_cost=0
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
xen_mem: Initialising balloon driver.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
i8042.c: No controller found.
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Xen virtual console successfully installed as tty1
Event-channel device installed.
netfront: Initialising virtual ethernet driver.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
Registering block device major 8
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Using IPI No-Shortcut mode
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 144k freed

   ***************************************************************
   ***************************************************************
   ** WARNING: Currently emulating unsupported memory accesses  **
   **          in /lib/tls glibc libraries. The emulation is    **
   **          slow. To ensure full performance you should      **
   **          install a 'xen-friendly' (nosegneg) version of   **
   **          the library, or disable tls support by executing **
   **          the following as root:                           **
   **          mv /lib/tls /lib/tls.disabled                    **
   ** Offending process: init (pid=1)                           **
   ***************************************************************
   ***************************************************************

Pausing... 5Pausing... 4Pausing... 
3Pausing... 2Pausing... 1Continuing...
		Welcome to Fedora
		Press 'I' to enter interactive startup.
Starting udev: [  OK  ]
Setting hostname localhost.localdomain:  [  OK  ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1
/dev/sda1: clean, 19136/45216 files, 117565/180736 blocks
[/sbin/fsck.ext3 (1) -- /mnt] fsck.ext3 -a /dev/sda2
ext2fs_check_if_mount: No such file or directory while determining 
whether /dev/sda2 is mounted.
/dev/sda2: Adding dirhash hint to filesystem.
/dev/sda2: clean, 11/19546112 files, 661385/39088128 blocks
[  OK  ]
Remounting root filesystem in read-write mode:  [  OK  ]
Mounting local filesystems:  [  OK  ]
Enabling /etc/fstab swaps:  [  OK  ]
Entering non-interactive startup
ip6tables: Applying firewall rules: modprobe: FATAL: Could not load 
/lib/modules/2.6.16-xenU/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.16-xenU/modules.dep: No such file 
or directory
modprobe: FATAL: Could not load /lib/modules/2.6.16-xenU/modules.dep: No 
such file or directory
ip6tables-restore v1.4.1.1: ip6tables-restore: unable to initialize 
table 'filter'
Error occurred at line: 3
Try `ip6tables-restore -h' or 'ip6tables-restore --help' for more 
information.
[FAILED]
iptables: Applying firewall rules: FATAL: Could not load 
/lib/modules/2.6.16-xenU/modules.dep: No such file or directory
iptables-restore v1.4.1.1: iptables-restore: unable to initialize table 
'filter'
Error occurred at line: 3
Try `iptables-restore -h' or 'iptables-restore --help' for more information.
[FAILED]
Starting system logger: [  OK  ]
Starting system message bus: [  OK  ]
Generating SSH1 RSA host key: [  OK  ]
Generating SSH2 RSA host key: [  OK  ]
Generating SSH2 DSA host key: [  OK  ]
Starting sshd: [  OK  ]
Starting crond: [  OK  ][  OK  ]
curl: (7) Failed to connect to 169.254.169.254: Network is unreachable
Updating ec2-ami-tools
curl: (6) Couldn't resolve host 's3.amazonaws.com'
c
Fedora release 9 (Sulphur)
Kernel 2.6.16-xenU on an i686 (tty1)
localhost log