[Thincrust-devel] eth0 interface doesn't come up on latest derived F10 AMI
Jon Steer
jon.steer at gmail.com
Mon Dec 29 16:32:46 UTC 2008
re: specific specific ramdisk and kernel..
yes, I thought I did. I also checked that the AMI ran after I saved it..
Below is the console output.
I suspect that this line is telling me something
*"PCI: Fatal: No config space access function found"*
I'll try rebundling again and see if I get a different result.
Linux version 2.6.21.7-2.fc8xen (mockbuild at xenbuilder1.fedora.redhat.com)
(gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Feb 15 12:39:36
EST 2008
BIOS-provided physical RAM map:
sanitize start
sanitize bail 0
copy_e820_map() start: 0000000000000000 size: 000000006ac00000 end:
000000006ac00000 type: 1
Xen: 0000000000000000 - 000000006ac00000 (usable)
980MB HIGHMEM available.
727MB LOWMEM available.
NX (Execute Disable) protection: active
Zone PFN ranges:
DMA 0 -> 186366
Normal 186366 -> 186366
HighMem 186366 -> 437248
early_node_map[1] active PFN ranges
0: 0 -> 437248
ACPI in unprivileged domain disabled
Detected 2600.002 MHz processor.
Built 1 zonelists. Total pages: 433833
Kernel command line: root=/dev/sda1 ro 4
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c136c000 soft=c134c000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 2599.998 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000
Memory: 1711020k/1748992k available (2071k kernel code, 28636k reserved,
1080k data, 188k init, 1003528k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000 (5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc : 0xee000000 - 0xf4ffe000 ( 111 MB)
lowmem : 0xc0000000 - 0xed7fe000 ( 727 MB)
.init : 0xc1319000 - 0xc1348000 ( 188 kB)
.data : 0xc1205e6e - 0xc1313fd4 (1080 kB)
.text : 0xc1000000 - 0xc1205e6e (2071 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6502.34 BogoMIPS
(lpj=13004684)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 13k freed
Brought up 1 CPUs
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 6775k freed
audit: initializing netlink socket (disabled)
audit(1230567692.331:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
ksign: Installing public key data
Loading keyring
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Xen virtual console successfully installed as xvc0
Linux version 2.6.21.7-2.fc8xen (mockbuild at xenbuilder1.fedora.redhat.com)
(gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Feb 15 12:39:36
EST 2008
BIOS-provided physical RAM map:
sanitize start
sanitize bail 0
copy_e820_map() start: 0000000000000000 size: 000000006ac00000 end:
000000006ac00000 type: 1
Xen: 0000000000000000 - 000000006ac00000 (usable)
980MB HIGHMEM available.
727MB LOWMEM available.
NX (Execute Disable) protection: active
Zone PFN ranges:
DMA 0 -> 186366
Normal 186366 -> 186366
HighMem 186366 -> 437248
early_node_map[1] active PFN ranges
0: 0 -> 437248
ACPI in unprivileged domain disabled
Detected 2600.002 MHz processor.
Built 1 zonelists. Total pages: 433833
Kernel command line: root=/dev/sda1 ro 4
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c136c000 soft=c134c000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 2599.998 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000
Memory: 1711020k/1748992k available (2071k kernel code, 28636k reserved,
1080k data, 188k init, 1003528k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000 (5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc : 0xee000000 - 0xf4ffe000 ( 111 MB)
lowmem : 0xc0000000 - 0xed7fe000 ( 727 MB)
.init : 0xc1319000 - 0xc1348000 ( 188 kB)
.data : 0xc1205e6e - 0xc1313fd4 (1080 kB)
.text : 0xc1000000 - 0xc1205e6e (2071 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6502.34 BogoMIPS
(lpj=13004684)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 13k freed
Brought up 1 CPUs
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 6775k freed
audit: initializing netlink socket (disabled)
audit(1230567692.331:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
ksign: Installing public key data
Loading keyring
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Xen virtual console successfully installed as xvc0
Event-channel device installed.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 Dual-Core AMD Opteron(tm) Processor 2218 HE processors
(version 2.00.00)
powernow-k8: BIOS error - no PSB or ACPI _PSS objects
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/vbd/2050
XENBUS: Device with no driver: device/vbd/2051
XENBUS: Device with no driver: device/vbd/2049
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 188k freed
Write protecting the kernel read-only data: 795k
Red Hat nash version 6.0.19 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading xennet.ko module
netfront: Initialising virtual ethernet driver.
netfront: device eth0 has flipping receive path.
Loading xenblk.ko module
xen-vbd: registered block device major 8
Loading ehci-hcd.ko module
Loading ohci-hcd.ko module
Loading uhci-hcd.ko module
USB Universal Host Controller Interface driver v3.0
Loading mbcache.ko module
Loading jbd.ko module
Loading ext3.ko module
Creating root device.
Mounting root filesystem.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
Welcome to Fedora
Press 'I' to enter interactive startup.
Starting udev: /sbin/start_udev: line 131: /sbin/restorecon: No such file or
directory
the program '/bin/bash' called '/sbin/udevsettle', it should use 'udevadm
settle <options>', this will stop working in a future release
udevadm[315]: the program '/bin/bash' called '/sbin/udevsettle', it should
use 'udevadm settle <options>', this will stop working in a future release
[ OK ]
Setting hostname localhost.localdomain: [ OK ]
Setting up Logical Volume Management: File descriptor 7
(/sys/kernel/hotplug) leaked on lvm invocation. Parent PID 223: /bin/bash
[ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1
/dev/sda1: clean, 22324/655360 files, 230544/2621440 blocks
[/sbin/fsck.ext3 (1) -- /mnt] fsck.ext3 -a /dev/sda2
/dev/sda2: Adding dirhash hint to filesystem.
/dev/sda2 has gone 181 days without being checked, check forced.
/dev/sda2: 11/19546112 files (0.0% non-contiguous), 661385/39088128 blocks
[PASSED]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
Entering non-interactive startup
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
Determining IP information for eth0...RTNETLINK answers: No such process
done.
RTNETLINK answers: Network is down
[ OK ]
Starting system logger: [ OK ]
Starting system message bus: [ OK ]
Mounting other filesystems: [ OK ]
Starting sshd: [ OK ]
curl: (7) Failed to connect to 169.254.169.254: Network is unreachable
Updating ec2-ami-tools
curl: (6) Couldn't resolve host 's3.amazonaws.com'
Fedora release 10.90 (Rawhide)
Kernel 2.6.21.7-2.fc8xen on an i686 (/dev/xvc0)
ip-10-251-194-19 login:
On Mon, Dec 29, 2008 at 11:24 AM, Bryan Kearney <bkearney at redhat.com> wrote:
> Jon Steer wrote:
>
>> This is a stumper..
>> Last week I took the newly rev'ed F10 AMI, booted it, and made a few
>> derivatives of it.
>> They all worked, last week.
>>
>> Today, I tried to boot up the derivatives and they failed with the
>> following information in the console.
>>
>> Bringing up interface eth0: Determining IP information for
>> eth0...RTNETLINK answers: No such process
>> done.
>> RTNETLINK answers: Network is down
>> [ OK ]
>> Starting system logger: [ OK ]
>> Starting system message bus: [ OK ]
>> Mounting other filesystems: [ OK ]
>> Starting sshd: [ OK ]
>> curl: (7) Failed to connect to 169.254.169.254 <http://169.254.169.254>:
>> Network is unreachable
>> Updating ec2-ami-tools
>> curl: (6) Couldn't resolve host 's3.amazonaws.com <
>> http://s3.amazonaws.com>'
>> Fedora release 10.90 (Rawhide)
>> Kernel 2.6.21.7-2.fc8xen on an i686 (/dev/xvc0)
>>
>
> When you rebundled the ami, did you specify a specific kernel and ramdisk?
>
> -- bk
>
> _______________________________________________
> Thincrust-devel mailing list
> Thincrust-devel at redhat.com
> https://www.redhat.com/mailman/listinfo/thincrust-devel
>
--
"Don't stand still, if you see me running down the road, 'cause there is
trouble right behind me".
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/thincrust-devel/attachments/20081229/30e0ec6c/attachment.htm>
More information about the Thincrust-devel
mailing list