[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Apache and Router issues



I can FTP from the Internet.

I am using a Linksys BEFSR41 router.  

I am trying to access the webserver from the IP address that my ISP gives me.

> You said that you can FTP to this machine.  Is that from inside your
> network or from the Internet?
> 
> What kind of router is it?
> 
> As for the two ETH0's, you have two different routes poing out the ETH0
> interface:  the route to the 192.168.1 network and the
> route-of-last-resort, aka the default route.  Both routes need to be
> listed and both point to ETH0.  Make sense?
> 
> -Michael
> 
> >>> tobey1 att net 10/10/02 01:09PM >>>
> Now I have this:
> Destination      Gateway       Genmask       Flags   Metric  Ref  Use 
> Iface
> 192.168.1.0      0.0.0.0       255.255.255.0  U      0       0    0   
> eth0
> 127.0.0.0        0.0.0.0       255.0.0.0      U      0       0    0   
> lo 
> 0.0.0.0          192.168.1.1   0.0.0.0        UG     0       0    0   
> eth0
> 
> I still cannot access from the outside of my network.  Why is ther 2
> eth0 
> references?  I can FTP to this machine easily, but I am having a ton of
> trouble 
> with apache.
> 
> Joe
> > You need a real gateway address in /etc/sysconfig/network
> > (or you can use 'neat' in gui mode or setup (network) at console
> > 
> > real gateway address might be 192.168.1.1 - but 192.168.1.0 is a
> > 'network' address and no router/machine can have that address.
> > 
> > Craig
> > 
> > On Wed, 2002-10-09 at 18:35, tobey1 att net wrote:
> > > Since I am really new at this, can you help me understand what this
> means and
> > > what needs to change?
> > > 
> > > Destination      Gateway       Genmask       Flags   Metric  Ref 
> Use  Iface
> > > 192.168.1.0      0.0.0.0       255.255.255.0  U      0       0    0
>    eth0
> > > 127.0.0.0        0.0.0.0       255.0.0.0      U      0       0    0
>    lo 
> > > 0.0.0.0          192.168.1.0   0.0.0.0        UG     0       0    0
>    eth0
> > > 
> > > Thanks,
> > > Joe
> > > > the machine which have ur apache ,does it know what its gateway
> is...
> > > > run the route command to check what is its gateway and u'll know
> if it is
> > > > listening to the port forwarding  of ur gateway...just a thought
> > > > Aman Pannu
> > > > QA Engineer
> > > > Keyhole
> > > > MountainView
> > > > aman keyholecorp com 
> > > > 
> > > > ----- Original Message -----
> > > > From: <tobey1 att net>
> > > > To: <valhalla-list redhat com>
> > > > Sent: Wednesday, October 09, 2002 12:19 PM
> > > > Subject: Apache and Router issues
> > > > 
> > > > 
> > > > > I am running apache on my machine, and I am trying to access my
> virtual
> > > > host
> > > > > from outside my network.  I have forwarded port 80 to the the
> IP address
> > > > of my
> > > > > Linux/Apache machine and I keep getting a gateway timeout.  I
> have
> > > > disabled the
> > > > > Block WAN access on my router, and still nothing.  Apache is
> set up to
> > > > listen
> > > > > on PORT 80.  Am I missing something simple?  It works
> internally.
> > > > >
> > > > > Thanks
> 
> 
> 
> _______________________________________________
> Valhalla-list mailing list
> Valhalla-list redhat com
> https://listman.redhat.com/mailman/listinfo/valhalla-list





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]