[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Toubles with ISDN card (eicon ISA)



Hi all, it my first time setting up an isdn card, the card is an Eicon
Diva Server BRI ISA.
There are output logs from all files i think are involved.

/etc/isapnp.conf

(READPORT 0x0273)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
(CONFIGURE GDI0041/11501 (LD 0
#     IRQ 3, 5, 7, 9, 10, 11, 12, 14 or 15.
#         High true, edge sensitive interrupt
  (INT 0 (IRQ 11 (MODE +E)))
#     Logical device decodes 16 bit IO address lines
#         Minimum IO base address 0x0200
#         Maximum IO base address 0x03e0
#         IO base alignment 32 bytes
#         Number of IO addresses required: 8
  (IO 0 (SIZE 8) (BASE 0x0200) (CHECK))
 (NAME "GDI0041/11501[0]{G.Diehl ISDN (EICON Technology) DIVA Server
BRI}")
  (ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)

/proc/interrupts

           CPU0
  0:    6371775          XT-PIC  timer
  1:          3          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:      61702          XT-PIC  eth0
  8:          1          XT-PIC  rtc
 10:      32532          XT-PIC  eth1
 12:          0          XT-PIC  PS/2 Mouse
 14:      34421          XT-PIC  ide0
NMI:          0
ERR:          0

/proc/ioports

0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
0213-0213 : isapnp read
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
b400-b4ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C (#2)
  b400-b4ff : 8139too
b800-b8ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C
  b800-b8ff : 8139too
d000-d0ff : Adaptec AHA-2940U2/U2W / 7890/7891
d400-d41f : Intel Corp. 82371AB/EB/MB PIIX4 USB
d800-d80f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
  d800-d807 : ide0
  d808-d80f : ide1
e400-e43f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
e800-e81f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI

I think all it's ok at the moment....

  ... but when i try to load hisax module
modprobe hisax id=HiSax type=11 protocol=2 io=0x0200 irq=11

i got this error: 

HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 1.1.4.1
HiSax: Layer2 Revision 1.1.4.1
HiSax: TeiMgr Revision 1.1.4.1
HiSax: Layer3 Revision 1.1.4.1
HiSax: LinkLayer Revision 1.1.4.1
HiSax: Approval certification valid
HiSax: Approved with ELSA Microlink PCI cards
HiSax: Approved with Eicon Technology Diva 2.01 PCI cards
HiSax: Approved with Sedlbauer Speedfax + cards
HiSax: Approved with HFC-S PCI A based cards
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: Eicon.Diehl Diva driver Rev. 1.1.4.1
Diva: IPAC version ff
Diva: ISA card configured at 0x200 IRQ 11
Diva: ISAC version (c2): 2085 B2
Diva: HSCX version A: A1  B: ???
Diva: wrong HSCX versions check IO address
HiSax: Card Eicon.Diehl Diva not installed !

Any ideas?? >8-(

Thanx for your support.

-- 
Alex Perez (psychiatric.com.ar) | Disco oil bussing will create a
Linux User 276491               | throbbing naugahide pipeline running
Kernel 2.4.18-26                | straight to the tropics from the rug
on a i686                       | producing regions and devalue the

Attachment: signature.asc
Description: Esta parte del mensaje esta firmada digitalmente


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]