[vfio-users] problem with passthrough and unsafe interrupts

[Janusz]

W dniu 13.09.2015 o 15:44, Okky Hendriansyah pisze:
> I assume you're installing with QEMU machine model Q35, have you tried with model i440FX also? 
I am not using Q35, when I try to use Q35 with OVMF, I am not able to
boot either installed windows and windows installation from iso - uefi
interactive shell is showing up and I can't even trigger boot menu, when
I set boot menu=on and set cdrom I get message: could not read from
CDROM, code 0003


>
> Best regards,
> Okky Hendriansyah
>
>> On Sep 13, 2015, at 20:15, Janusz <januszmk6 at gmail.com> wrote:
>>
>> W dniu 13.09.2015 o 15:08, Okky Hendriansyah pisze:
>>> Hi Janus,
>>>
>>> Are you trying to upgrade to Windows 10? I had issues when upgrading from Windows 8.1 to Windows 10, after changing the cpu to "core2duo", the upgrade finished and I quickly revert back to "host" on my first reboot.
>>>
>>> Best regards,
>>> Okky Hendriansyah
>> no upgrade, I had clean installation on uefi platform done without
>> passing through my gpu, but when I limited threads to 1 windows was
>> unable to boot - every time it reboots it self. I reinstalled windows
>> 10, but still have problem that its sometimes reseting it self while
>> loading (no bsod just reset), and just installed windows 8.1, the same
>> problem. The installation both win10 and win8.1 went without problems.
>>
>>>> On Sep 13, 2015, at 18:21, Janusz <januszmk6 at gmail.com> wrote:
>>>>
>>>> W dniu 13.09.2015 o 00:28, Blank Field pisze:
>>>>> Looking at IOMMU groups, his lspci and his problems, there's no way
>>>>> anyone would want to take intel for VFIO usage.
>>>>> Good lord, that's worse than my system...
>>>>>> No BSOD, only silent reboot or reset on uefi bios display, also reset
>>>>>> issue for gpu (that was already fixed I think in some kernel/qemu
>>>>>> version for hawaii, monitor still gets old display sometimes after
>>>>>> turining off or reset VM), in dmesg I found only those:
>>>>>>
>>>>>> [10145.621272] vgaarb: device changed decodes:
>>>>>> PCI:0000:01:00.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>>>>>> [10145.641778] vgaarb: device changed decodes:
>>>>>> PCI:0000:01:00.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>>>>>> [10145.760058] [drm:check_wm_state] *ERROR* mismatch in DDB state
>>>>>> pipe A plane 1 (expected (0,0), found (0,289))
>>>>>> [10145.760061] [drm:check_wm_state] *ERROR* mismatch in DDB state
>>>>>> pipe A cursor (expected (0,0), found (289,297))
>>>>>> [10145.760062] [drm:check_wm_state] *ERROR* mismatch in DDB state
>>>>>> pipe B plane 1 (expected (0,0), found (297,586))
>>>>>> [10145.760063] [drm:check_wm_state] *ERROR* mismatch in DDB state
>>>>>> pipe B cursor (expected (0,0), found (586,594))
>>>>>> [10148.490876] vfio_ecap_init: 0000:01:00.0 hiding ecap 0x19 at 0x270
>>>>>> [10148.490881] vfio_ecap_init: 0000:01:00.0 hiding ecap 0x1b at 0x2d0
>>>>>> [10154.080574] usb 1-12: reset low-speed USB device number 5 using
>>>>>> xhci_hcd
>>>>>> [10154.372122] usb 1-12: ep 0x81 - rounding interval to 64
>>>>>> microframes, ep desc says 80 microframes
>>>>>> [10194.443399] kvm: zapping shadow pages for mmio generation wraparound
>>>>>> [10194.453708] kvm: zapping shadow pages for mmio generation wraparound
>>>>>> [10165.930150] usb 1-12: ep 0x81 - rounding interval to 64
>>>>>> microframes, ep desc says 80 microframes
>>>>>> [10168.912066] usb 1-12: reset low-speed USB device number 5 using
>>>>>> xhci_hcd
>>>>>> [10169.203902] usb 1-12: ep 0x81 - rounding interval to 64
>>>>>> microframes, ep desc says 80 microframes
>>>>>>
>>>>>>
>>>>>> I can be missing something as I get lot of warnings from i915 driver
>>>>>> (known bug for i915 and skylake), but I did grep for kvm and vfio and
>>>>>> didn't find anything else
>>>>>>
>>>>>> I am running now dev version of qemu because I wanted to test if
>>>>>> newer version will give better result (it didn't), and didn't
>>>>>> compiled back the stable version yet
>>>>> And yes, I have AMD Catalyst drivers installed in the guest, but as
>>>>> this also happening before it starts to boot windows and when starting
>>>>> windows installation, I don't think this is the reason
>>>> I think I found some solution. I changed number of threads on cpu from 2
>>>> to 1, and windows installation is starting every time now. problem still
>>>> is with installed windows - its rebooting every time it wants to start
>>>> win10, is windows sensitive for such changes?
>>>> When I changed number of threads to 2 and number of cores to 3, problem
>>>> still occurs
>>>>
>>>> Also, I upgraded to kernel 4.3-r1
>>>>
>>>> I find that someone reported issue to OVMF that it has problems with
>>>> kernel >= 4.2 https://github.com/tianocore/edk2/issues/21, unfortunately
>>>> I am not able to test it on 4.1 or 4.0 as on 4.1 I get some weird
>>>> operations on null pointer in kernel at boot - segfault, and in 4.0 I
>>>> don't even get signal to monitor - probably hardware is too new for
>>>> those versions (I know about i915 preliminary support but its not working)
>>>>
>>>> anyway, I am gonna test futher later,  and see if with threads=1,cores=4
>>>> will problem still occur after reinstalling win10
>>>>
>>>> _______________________________________________
>>>> vfio-users mailing list
>>>> vfio-users at redhat.com
>>>> https://www.redhat.com/mailman/listinfo/vfio-users