[vfio-users] OVMF: Boots only first time after driver installation

[Eddie Yen]

I notice that you're using Crimson driver.
Is that a same issue using legacy driver instead of Crimson? I remember
driver support 285 before Crimson released.

2016-01-02 19:55 GMT+08:00 S B <sb9sb0 at gmail.com>:

> Thank you, romfile was only a try, it helped in an old VGA VM.
> I tried the following command, but have the same problem, I also tried
> older pc-i440fx
>
> /usr/bin/qemu-system-x86_64
>     -enable-kvm -M pc-i440fx-2.4 -cpu host,kvm=off -smp
> 3,sockets=1,cores=3,threads=1 -m 4096
>     -soundhw hda -serial none -parallel none -name Wingame -rtc
> base=localtime -vga none -nographic -display none
>     -device vfio-pci,host=01:00.0,addr=09.0,multifunction=on
>     -device vfio-pci,host=01:00.1,addr=09.1
>     -drive
> if=pflash,format=raw,readonly,file=/root/qemu/win10/OVMF_CODE-pure-efi.fd
>     -drive if=pflash,format=raw,file=/root/qemu/win10/my_vars.fd
>     -readconfig /root/qemu/config/ich9-ehci-uhci.cfg
>     -device usb-host,vendorid=0x0079,productid=0x0006
>     -device usb-host,vendorid=0x045e,productid=0x028e
>     -device usb-host,vendorid=0x062a,productid=0x0252
>     -device usb-host,vendorid=0x04f3,productid=0x0103
>     -drive
> file=/root/qemu/win10/win10_vga.qcow2,id=win,format=qcow2,if=none
>     -device ide-hd,bus=ide.0,drive=win
>     -boot c
>
>
> 2016-01-02 2:34 GMT+01:00 Eddie Yen <missile0407 at gmail.com>:
>
>> Try using i440fx instead of Q35 if you're using OVMF.
>> Also, GPU rom file only needed that Host can't catch correct VBIOS
>> information, so try to remove romfile sign and boot again.
>>
>>
>
> _______________________________________________
> vfio-users mailing list
> vfio-users at redhat.com
> https://www.redhat.com/mailman/listinfo/vfio-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/vfio-users/attachments/20160102/219ad7a9/attachment.htm>