[vfio-users] passthrough usb controler pci-e card ?

[thibaut noah]

Bumping this, running virsh nodedev-detach pci_0000_xx_yy_z'  (with proper
numbers) and/or having managed=yes in the xml file changes nothing
(actually i had this already), ovmf still hangs waiting for i have no idea
what.
Cannot run by unbinding the device through script either, seems that i was
lucky, or maybe i did something that i forgot.
Tried to add nodedev-detach to modprobe but it seems that i did not do it
in the proper way so it wasn't working

2016-01-16 11:30 GMT+01:00 thibaut noah <thibaut.noah at gmail.com>:

> Didn't know libvirt was capable of unbinding devices on its own, good to
> know, i'm gonna try this and if i manage to make it work i don't have any
> reason to bother myself more with this. (note that i don't use virt-manager
> since you advise me to use libvirt directly)
> Though the usb card will only be use by the vm, i have more than enough
> usb ports on my backpanel.
>
> Tried the gpu method by adding the id of the device in modprobe.d after
> gpu's ids but it didn't work.
>
> I paid it 50euros :(
> Thanks for the explanations alex
>
>
> 2016-01-15 18:59 GMT+01:00 Alex Williamson <alex.williamson at redhat.com>:
>
>> A couple comments, first, boot time pre-binding to vfio-pci is really
>> only necessary for devices where the native host drivers behave poorly
>> if you take the device away from them later.  This is why we do it for
>> GPUs and their companion sound device, host GPU drivers don't like to
>> give up the device, it plays poorly with any sort of graphics on the
>> host, and sequestering the audio device prevents host tools from
>> getting confused (and there are some bugs in the audio driver limiting
>> number of attach/detach cycles iirc).
>>
>> For anything else, you can dynamically unbind the device from the host
>> driver, bind it to vfio while the VM is running, and give it back to
>> the host on shutdown.  libvirt will do this automatically for you if
>> your XML sets managed='yes' for the <hostdev> device.  This is the
>> default, so if you use virt-manager to add the device, just select Add
>> Hardware -> PCI Host Device -> select device -> Finish.  Done.  If for some
>> reason you don't want the device flopping back and forth between host and
>> guest, just run 'virsh nodedev-detach pci_0000_xx_yy_z' at bootup where
>> xx_yy_z is the PCI bus (xx), device (yy), and function (z) numbers, the
>> same as in lspci.  You can adopt some of the GPU methods for doing this if
>> you want it to happen earlier as well, there are lots of ways to do this
>> with modprobe.d (install options, softdep, etc..)
>>
>> Finally, yes I've seen OVMF hang with some crappy USB controllers.  I'm
>> not sure if it's dependent on the devices attached or the controller
>> itself, but cheaper isn't always better when it comes to selecting
>> devices to use with device assignment.  Thanks,
>>
>> Alex
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/vfio-users/attachments/20160119/71ae82f7/attachment.htm>