[vfio-users] Use primary gpu for passthrough (i915)

[Thomas K.]

seems to be enabled:
cat /sys/module/i915/parameters/enable_hd_vgaarb
Y


On 20.03.2016 12:49, Matthew Wolffsohn wrote:
> It sounds to me like your vga-arb hasn't applied properly. Is there 
> supposed to be a space in the module line you posted?
>
>
> Sent from ProtonMail mobile
>
>
>
> -------- Original Message --------
> On 20 Mar 2016, 11:18, Thomas K. wrote:
>
>
>     Hi,
>
>     when starting the VM via virt-manager, monitor blanks out and loses
>     sync. "top" shows usage of 100% for the VM. Configurations are:
>
>     ### module options:
>     options i915 enable_hd_vgaarb=1
>     options vfio-pci ids=8086:0152
>
>     ### kernel version:
>     Linux Gateway 4.4.5-1-vfio #1 SMP PREEMPT Sat Mar 19 14:42:55 CET
>     2016
>     x86_64 GNU/Linux
>
>     ### vfio log
>     [ 0.000000] Linux version 4.4.5-1-vfio (mbi at Gateway) (gcc version
>     5.3.0 (GCC) ) #1 SMP PREEMPT Sat Mar 19 14:42:55 CET 2016
>     [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-vfio
>     root=/dev/sdb2 intel_iommu=on
>     [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-vfio
>     root=/dev/sdb2 intel_iommu=on
>     [ 0.572420] vfio_pci: add [8086:0152[ffff:ffff]] class
>     0x000000/00000000
>     [ 513.851798] vfio-pci 0000:00:02.0: enabling device (0400 -> 0403)
>
>     ### qemu.conf:
>     http://paste.pound-python.org/show/1YLZTAKSOzwkJC57h2A9/
>     ### machine.xml:
>     http://paste.pound-python.org/show/9dm3kozcAS33jqlqYoug/
>     ### lspci: http://paste.pound-python.org/show/mK0RwgrrBZi6dItX4pib/
>     ### dmesg: http://paste.pound-python.org/show/O9iiDploHcKwZJ8mZPGa/
>
>     Is it even possible with a Optiplex 7010?
>
>     regards
>
>     Thomas
>
>     _______________________________________________
>     vfio-users mailing list
>     vfio-users at redhat.com
>     https://www.redhat.com/mailman/listinfo/vfio-users
>