[vfio-users] IGD passthrough can not light up screen

Thu Oct 25 01:38:48 UTC 2018

In guest device manager, only shows a general standard monitor.
But In intel driver control panel monitor menu, no monitor can be found.

Acewind <acewind at gmail.com> 于2018年10月25日周四 上午9:33写道：

> I can connect into win10 guest by rdp, and install vga driver, the monitor
> device also works normally.
>
> Acewind <acewind at gmail.com> 于2018年10月24日周三 下午10:06写道：
>
>> I run a win10 guest in ubuntu 18.10 with intel igd vfio passed through
>> into the guest:
>> CPU: Intel(R) Core(TM) i3-7100U CPU @ 2.40GHz
>> VGA: Intel Corporation HD Graphics 620 (rev 02)
>>
>> Host boot in legacy mode:
>> root at localhost:/home# efibootmgr
>> EFI variables are not supported on this system.
>>
>> root at localhost:/home# ps -elf | grep qemu
>> 6 S libvirt+  1941     1 99  80   0 - 1205084 poll_s 21:54 ?
>> 00:04:32 qemu-system-x86_64 -enable-kvm -name guest=win10,debug-threads=on
>> -S -object
>> secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-3-win10/master-key.aes
>> -machine pc-i440fx-cosmic,accel=kvm,usb=off,dump-guest-core=off -cpu
>> Broadwell-noTSX-IBRS,vme=on,f16c=on,rdrand=on,hypervisor=on,arat=on,xsaveopt=on,abm=on,hv_time,hv_relaxed,hv_vapic,hv_spinlocks=0x1fff
>> -m 3584 -realtime mlock=off -smp 4,sockets=4,cores=1,threads=1 -uuid
>> d4e06db6-08e3-407c-8788-8896a17965c0 -display none -no-user-config
>> -nodefaults -chardev socket,id=charmonitor,fd=24,server,nowait -mon
>> chardev=charmonitor,id=monitor,mode=control -rtc
>> base=localtime,driftfix=slew -global kvm-pit.lost_tick_policy=delay
>> -no-hpet -no-shutdown -global PIIX4_PM.disable_s3=1 -global
>> PIIX4_PM.disable_s4=1 -boot strict=on -device
>> ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x4.0x7 -device
>> ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x4
>> -device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,addr=0x4.0x1
>> -device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,addr=0x4.0x2
>> -drive file=/home/win10.qcow2,format=qcow2,if=none,id=drive-ide0-0-0
>> -device
>> ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1
>> -netdev tap,fd=26,id=hostnet0 -device
>> rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:0f:34:ec,bus=pci.0,addr=0x3
>> -chardev pty,id=charserial0 -device
>> isa-serial,chardev=charserial0,id=serial0 -device
>> usb-tablet,id=input0,bus=usb.0,port=1 -device
>> vfio-pci,host=00:02.0,id=hostdev0,bus=pci.0,addr=0x2,rombar=1,romfile=/home/vbios.dump
>> -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 -bios
>> /usr/share/seabios/bios.bin -chardev file,id=seabios,path=/tmp/bios.log
>> -device isa-debugcon,iobase=0x402,chardev=seabios -set
>> device.hostdev0.x-igd-opregion=on -set device.hostdev0.x-igd-gms=32
>> -sandbox
>> on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny
>> -msg timestamp=on
>>
>> In SeaBIOS log file, it shows guest already booted, but no signal on the
>> screen.
>>
>> SeaBIOS (version 1.11.1-1ubuntu1)
>> BUILD: gcc: (Ubuntu 8.2.0-7ubuntu1) 8.2.0 binutils: (GNU Binutils for
>> Ubuntu) 2.31.1
>> RamSize: 0xc0000000 [cmos]
>> Relocating init from 0x000e3220 to 0xbffb2180 (size 56800)
>> Found QEMU fw_cfg
>> QEMU fw_cfg DMA interface supported
>> RamBlock: addr 0x0000000000000000 len 0x00000000c0000000 [e820]
>> RamBlock: addr 0x0000000100000000 len 0x0000000020000000 [e820]
>> Moving pm_base to 0x600
>> boot order:
>> 1: /pci at i0cf8/ide at 1,1/drive at 0/disk at 0
>> 2: HALT
>> === PCI bus & bridge init ===
>> PCI: pci_bios_init_bus_rec bus = 0x0
>> === PCI device probing ===
>> Found 12 PCI devices (max PCI bus is 00)
>> === PCI new allocation pass #1 ===
>> PCI: check devices
>> === PCI new allocation pass #2 ===
>> PCI: IO: c000 - c1cf
>> PCI: 32: 00000000c0000000 - 00000000fec00000
>> PCI: map device bdf=00:03.0  bar 0, addr 0000c000, size 00000100 [io]
>> PCI: map device bdf=00:02.0  bar 4, addr 0000c100, size 00000040 [io]
>> PCI: map device bdf=00:04.0  bar 4, addr 0000c140, size 00000020 [io]
>> PCI: map device bdf=00:04.1  bar 4, addr 0000c160, size 00000020 [io]
>> PCI: map device bdf=00:04.2  bar 4, addr 0000c180, size 00000020 [io]
>> PCI: map device bdf=00:05.0  bar 0, addr 0000c1a0, size 00000020 [io]
>> PCI: map device bdf=00:01.1  bar 4, addr 0000c1c0, size 00000010 [io]
>> PCI: map device bdf=00:02.0  bar 0, addr fd000000, size 01000000 [mem]
>> PCI: map device bdf=00:03.0  bar 6, addr fe000000, size 00080000 [mem]
>> PCI: map device bdf=00:02.0  bar 6, addr fe080000, size 00010000 [mem]
>> PCI: map device bdf=00:03.0  bar 1, addr fe090000, size 00001000 [mem]
>> PCI: map device bdf=00:04.7  bar 0, addr fe091000, size 00001000 [mem]
>> PCI: map device bdf=00:02.0  bar 2, addr e0000000, size 10000000 [prefmem]
>> PCI: map device bdf=00:05.0  bar 4, addr f0000000, size 00004000 [prefmem]
>> PCI: init bdf=00:00.0 id=8086:1237
>> PCI: init bdf=00:01.0 id=8086:7000
>> PIIX3/PIIX4 init: elcr=00 0c
>> PCI: init bdf=00:01.1 id=8086:7010
>> PCI: init bdf=00:01.3 id=8086:7113
>> Using pmtimer, ioport 0x608
>> PCI: init bdf=00:02.0 id=8086:5916
>> Intel IGD OpRegion enabled at 0xbfffe000, size 8KB, dev 00:02.0
>> Intel IGD BDSM enabled at 0xbf700000, size 8MB, dev 00:02.0
>> PCI: init bdf=00:03.0 id=10ec:8139
>> PCI: init bdf=00:04.0 id=8086:2934
>> PCI: init bdf=00:04.1 id=8086:2935
>> PCI: init bdf=00:04.2 id=8086:2936
>> PCI: init bdf=00:04.7 id=8086:293a
>> PCI: init bdf=00:05.0 id=1af4:1002
>> PCI: init bdf=00:1f.0 id=8086:9d4e
>> PCI: Using 00:02.0 for primary VGA
>> handle_smp: apic_id=0x1
>> handle_smp: apic_id=0x2
>> handle_smp: apic_id=0x3
>> Found 4 cpu(s) max supported 4 cpu(s)
>> Copying PIR from 0xbffbfca0 to 0x000f0f80
>> Copying MPTABLE from 0x00006e9c/bffa8cd0 to 0x000f0e30
>> Copying SMBIOS entry point from 0x00006e9c to 0x000f0e10
>> Scan for VGA option rom
>> Running option rom at c000:0003
>> Turning on vga text mode console
>> SeaBIOS (version 1.11.1-1ubuntu1)
>> Machine UUID d4e06db6-08e3-407c-8788-8896a17965c0
>> EHCI init on dev 00:04.7 (regs=0xfe091020)
>> UHCI init on dev 00:04.0 (io=c140)
>> UHCI init on dev 00:04.1 (io=c160)
>> UHCI init on dev 00:04.2 (io=c180)
>> ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
>> ATA controller 2 at 170/374/0 (irq 15 dev 9)
>> Found 0 lpt ports
>> Found 1 serial ports
>> PS2 keyboard initialized
>> ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (40960 MiBytes)
>> Searching bootorder for: /pci at i0cf8/*@1,1/drive at 0/disk at 0
>> All threads complete.
>> Scan for option roms
>> Running option rom at d000:0003
>> pmm call arg1=1
>> pmm call arg1=0
>> pmm call arg1=1
>> pmm call arg1=0
>> Searching bootorder for: /pci at i0cf8/*@3
>> Searching bootorder for: /rom at genroms/kvmvapic.bin
>> Searching bootorder for: HALT
>> drive 0x000f0d70: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
>> s=83886080
>> Running option rom at d100:0003
>> Space available for UMB: d3800-ef000, f0000-f0d70
>> Returned 118784 bytes of ZoneHigh
>> e820 map has 10 items:
>>   0: 0000000000000000 - 000000000009fc00 = 1 RAM
>>   1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
>>   2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
>>   3: 0000000000100000 - 00000000bf700000 = 1 RAM
>>   4: 00000000bf700000 - 00000000bff00000 = 2 RESERVED
>>   5: 00000000bff00000 - 00000000bffdd000 = 1 RAM
>>   6: 00000000bffdd000 - 00000000c0000000 = 2 RESERVED
>>   7: 00000000feffc000 - 00000000ff000000 = 2 RESERVED
>>   8: 00000000fffc0000 - 0000000100000000 = 2 RESERVED
>>   9: 0000000100000000 - 0000000120000000 = 1 RAM
>> enter handle_19:
>>   NULL
>> Booting from Hard Disk...
>> Booting from 0000:7c00
>>
>> No errors found in dmesg or libvirt log.
>> Before virsh create, there's fail error in dmesg:
>> [drm] failed to retrieve link info, disabling eDP
>>
>>
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/vfio-users/attachments/20181025/08d00b1f/attachment.htm>