[virt-tools-list] [virt-viewer][PATCH v2] Introduce bash completion
Jonathon Jongsma
jjongsma at redhat.com
Tue May 7 18:32:49 UTC 2019
On Mon, 2019-05-06 at 13:27 +0200, Michal Privoznik wrote:
> With this change one can get list of domains on the command line:
>
> $ virt-viewer -c qemu:///system <TAB><TAB>
> dom1 dom2 ... domN
>
> The list of domains is fetched using virsh, hence the dependency
> on libvirt-client recorded in the spec file. I think it's fair
> to assume that Linux hosts with virt-viewer will have virsh
> available too. If they don't, nothing breaks and no error message
> is printed.
>
> The completer script is inspired by libvirt.
>
> Signed-off-by: Michal Privoznik <mprivozn at redhat.com>
> ---
I just sent in a little proposed fixup patch, but I also had a few
findings from testing it briefly. It works well enough, though there
are a few oddities. I'm not sure that they're worth fixing if they're
difficult, but I'll mention them here anyway for discussion.
====
If you've already specified a domain, tab completion tries to suggest
additional domains to add to the command:
virt-viewer --id 1 --reconnect <tab><tab>
1 13 2
====
X display completion doesn't seem to work for me:
$ virt-viewer --display=<tab>
(appends a colon to the command):
$ virt-viewer --display=:<tab>
(appends another colon):
$ virt-viewer --display=::
Further <tab> presses do nothing.
====
Additionally, is it useful to specify --all to the `virsh list`
command? How often is a user going to want to connect to a non-running
domain?
In general it looks good though.
Reviewed-by: Jonathon Jongsma <jjongsma at redhat.com>
>
> diff to v1:
> - Fixed 'make syntax-check' issue
> - Introduced support for completing domain IDs
> - Introduced --display= completer
>
> Makefile.am | 2 +-
> bash-completion/Makefile.am | 20 +++++++
> bash-completion/virt-viewer | 108
> ++++++++++++++++++++++++++++++++++++
> configure.ac | 9 ++-
> m4/virt-bash-completion.m4 | 83 +++++++++++++++++++++++++++
> virt-viewer.spec.in | 14 +++++
> 6 files changed, 234 insertions(+), 2 deletions(-)
> create mode 100644 bash-completion/Makefile.am
> create mode 100644 bash-completion/virt-viewer
> create mode 100644 m4/virt-bash-completion.m4
>
> diff --git a/Makefile.am b/Makefile.am
> index 4cfdd59..9dda6a3 100644
> --- a/Makefile.am
> +++ b/Makefile.am
> @@ -2,7 +2,7 @@ NULL =
>
> ACLOCAL_AMFLAGS = -I m4
>
> -SUBDIRS = icons src man po data tests
> +SUBDIRS = bash-completion icons src man po data tests
>
> AM_DISTCHECK_CONFIGURE_FLAGS = --disable-update-mimedb
> EXTRA_DIST = \
> diff --git a/bash-completion/Makefile.am b/bash-
> completion/Makefile.am
> new file mode 100644
> index 0000000..be1fc3f
> --- /dev/null
> +++ b/bash-completion/Makefile.am
> @@ -0,0 +1,20 @@
> +EXTRA_DIST = \
> + $(PACKAGE)
> +
> +install-data-local: install-bash-completion
> +
> +uninstall-local: uninstall-bash-completion
> +
> +if WITH_BASH_COMPLETION
> +install-bash-completion:
> + $(MKDIR_P) "$(DESTDIR)$(BASH_COMPLETIONS_DIR)"
> + $(INSTALL_SCRIPT) $(srcdir)/$(PACKAGE) \
> + "$(DESTDIR)$(BASH_COMPLETIONS_DIR)/$(PACKAGE)"
> +
> +uninstall-bash-completion:
> + rm -f $(DESTDIR)$(BASH_COMPLETIONS_DIR)/$(PACKAGE)
> + rmdir $(DESTDIR)$(BASH_COMPLETIONS_DIR) ||:
> +else ! WITH_BASH_COMPLETION
> +install-bash-completion:
> +uninstall-bash-completion:
> +endif ! WITH_BASH_COMPLETION
> diff --git a/bash-completion/virt-viewer b/bash-completion/virt-
> viewer
> new file mode 100644
> index 0000000..40f6e95
> --- /dev/null
> +++ b/bash-completion/virt-viewer
> @@ -0,0 +1,108 @@
> +#
> +# virt-viewer completer
> +#
> +
> +_virt_viewer_complete()
> +{
> + local words cword c w cur URI CMDLINE MODE DOMS
> +
> + # Here, $COMP_WORDS is an array of words on the bash
> + # command line that user wants to complete. However, when
> + # parsing command line, the default set of word breaks is
> + # applied. This doesn't work for us as it mangles virt-viewer
> + # arguments, e.g. connection URI (with the default set it's
> + # split into multiple items within the array). Fortunately,
> + # there's a fixup function for the array.
> + _get_comp_words_by_ref -n "\"'><=;|&(:" -w words -i cword
> + COMP_WORDS=( "${words[@]}" )
> + COMP_CWORD=${cword}
> + cur=${COMP_WORDS[$COMP_CWORD]}
> +
> + MODE="--name"
> + ALL="--all"
> + # See what URI is user trying to connect to. Honour that.
> + for ((c=1; c<=${COMP_CWORD}; c++)); do
> + case "${COMP_WORDS[c]}" in
> + -c|--connect)
> + if [[ -n "${COMP_WORDS[c+1]}" ]]; then
> + URI="${COMP_WORDS[c+1]}"
> + c=$((++c))
> + fi
> + ;;
> +
> + --connect=*)
> + w=${COMP_WORDS[c]#*=}
> + if [[ -z "$w" ]] ; then
> + return
> + fi
> + URI=$w
> + ;;
> +
> + --domain-name)
> + # Generate list of domain names which is done below
> + MODE="--name"
> + ALL="--all"
> + ;;
> +
> + --uuid)
> + # Generate list of domain UUIDs which is done below
> + MODE="--uuid"
> + ALL="--all"
> + ;;
> +
> + --id)
> + # Generate list of domain IDs which is done below
> + MODE=""
> + ALL=""
> + ;;
> + esac
> + done
> +
> + case "$cur" in
> + --connect=*)
> + # Nada
> + return
> + ;;
> +
> + --display=*)
> + cur=${cur#*=}
> + DISPLAYS=$(cd /tmp/.X11-unix && for x in X*; do echo
> ":${x#X}"; done)
> + COMPREPLY=($(compgen -W '${DISPLAYS}' -- "$cur"))
> + return
> + ;;
> +
> + --kiosk-quit=*)
> + cur=${cur#*=}
> + COMPREPLY=($(compgen -W 'never on-disconnect' --
> "$cur"))
> + return
> + ;;
> +
> + -*)
> + # If the current option already ends with '=' then don't
> generate
> + # any more --options
> + if [[ $cur == *= ]] ; then
> + return
> + fi
> + COMPREPLY=($(compgen -W '$( _parse_help "$1" -h )' --
> "$cur"))
> + if [[ $COMPREPLY == *= ]] ; then
> + compopt -o nospace
> + fi
> + return
> + ;;
> + esac
> +
> + CMDLINE=
> + if [ -n "${URI}" ]; then
> + CMDLINE="${CMDLINE} -c ${URI}"
> + fi
> +
> + DOMS=($(virsh -q -r ${CMDLINE} list ${ALL} ${MODE} 2>/dev/null |
> awk '{print $1;}' ))
> +
> + COMPREPLY=($(compgen -W "${DOMS[*]%--}" -- ${cur}))
> +
> + __ltrim_colon_completions "${cur}"
> + return
> +} &&
> +complete -F _virt_viewer_complete virt-viewer
> +
> +# vim: ft=sh:et:ts=4:sw=4:tw=80
> diff --git a/configure.ac b/configure.ac
> index 7b61821..b39c41e 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -1,4 +1,3 @@
> -
> AC_INIT([virt-viewer],[9.0])
> AC_CONFIG_SRCDIR(src/virt-viewer-main.c)
> AC_CONFIG_MACRO_DIR([m4])
> @@ -12,6 +11,8 @@ AC_CANONICAL_HOST
> m4_ifndef([AM_SILENT_RULES], [m4_define([AM_SILENT_RULES],[])])
> AM_SILENT_RULES([yes])
>
> +BASH_COMPLETION_REQUIRED="2.0"
> +
> # Keep these two definitions in agreement.
> GLIB2_REQUIRED="2.40"
> GLIB2_ENCODED_VERSION="GLIB_VERSION_2_40"
> @@ -29,6 +30,7 @@ SPICE_PROTOCOL_REQUIRED="0.12.7"
> GOVIRT_REQUIRED="0.3.3"
> REST_REQUIRED="0.8"
>
> +AC_SUBST([BASH_COMPLETION_REQUIRED])
> AC_SUBST([GLIB2_REQUIRED])
> AC_SUBST([LIBXML2_REQUIRED])
> AC_SUBST([LIBVIRT_REQUIRED])
> @@ -99,6 +101,9 @@
> AC_DEFINE_UNQUOTED([GETTEXT_PACKAGE],"$GETTEXT_PACKAGE", [GETTEXT
> package name])
> VIRT_VIEWER_ARG_NLS
> VIRT_VIEWER_CHECK_NLS
>
> +VIRT_VIEWER_ARG_BASH_COMPLETION
> +VIRT_VIEWER_CHECK_BASH_COMPLETION
> +
> PKG_PROG_PKG_CONFIG
> GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0`
> AC_SUBST(GLIB_MKENUMS)
> @@ -250,6 +255,7 @@ AM_CONDITIONAL(ENABLE_UPDATE_MIMEDB, test
> x$enable_update_mimedb = xyes)
>
> AC_CONFIG_FILES([
> Makefile
> + bash-completion/Makefile
> data/Makefile
> data/virt-viewer.wxs
> icons/Makefile
> @@ -291,3 +297,4 @@ AC_MSG_NOTICE([ LIBVIRT: $LIBVIRT_CFLAGS
> $LIBVIRT_LIBS])
> AC_MSG_NOTICE([])
> AC_MSG_NOTICE([ OVIRT: $OVIRT_CFLAGS $OVIRT_LIBS])
> AC_MSG_NOTICE([])
> +VIRT_VIEWER_RESULT_BASH_COMPLETION
> diff --git a/m4/virt-bash-completion.m4 b/m4/virt-bash-completion.m4
> new file mode 100644
> index 0000000..6a7267c
> --- /dev/null
> +++ b/m4/virt-bash-completion.m4
> @@ -0,0 +1,83 @@
> +dnl Bash completion support
> +dnl
> +dnl Copyright (C) 2017 Red Hat, Inc.
> +dnl
> +dnl This library is free software; you can redistribute it and/or
> +dnl modify it under the terms of the GNU Lesser General Public
> +dnl License as published by the Free Software Foundation; either
> +dnl version 2.1 of the License, or (at your option) any later
> version.
> +dnl
> +dnl This library is distributed in the hope that it will be useful,
> +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
> +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> GNU
> +dnl Lesser General Public License for more details.
> +dnl
> +dnl You should have received a copy of the GNU Lesser General Public
> +dnl License along with this library. If not, see
> +dnl <http://www.gnu.org/licenses/>;.
> +dnl
> +dnl Inspired by libvirt code.
> +dnl
> +
> +AC_DEFUN([VIRT_VIEWER_ARG_BASH_COMPLETION],[
> + m4_divert_text([DEFAULTS], [[enable_bash_completion=check]])
> + AC_ARG_ENABLE([bash_completion],
> + [AS_HELP_STRING([--enable-bash-completion],
> + [bash completion
> @<:@default=check@:>@])])
> + m4_divert_text([DEFAULTS], [[with_bash_completions_dir=check]])
> + AC_ARG_WITH([bash_completions_dir],
> + [AS_HELP_STRING([--with-bash-completions-dir=DIR],
> + [directory containing bash completions
> scripts @<:@default=check@:>@])])
> +])
> +
> +
> +AC_DEFUN([VIRT_VIEWER_CHECK_BASH_COMPLETION], [
> + if test "x$enable_bash_completion" != "xno" ; then
> + PKG_CHECK_MODULES(BASH_COMPLETION, bash-completion >=
> $BASH_COMPLETION_REQUIRED,
> + [with_bash_completion=yes],
> + [with_bash_completion=no])
> + if test "x$enable_bash_completion:x$with_bash_completion" =
> "yes:no"; then
> + m4_default(fail_action,
> + [AC_MSG_ERROR([You must install the ]pc_name[ >=
> ]pc_version[ pkg-config module to compile virt-viewer])])
> + fi
> + enable_bash_completion=$with_bash_completion
> + fi
> +
> + if test "x$with_bash_completion" = "xyes" ; then
> + if test "x$with_bash_completions_dir" = "xcheck"; then
> + AC_MSG_CHECKING([for bash-completions directory])
> + BASH_COMPLETIONS_DIR="$($PKG_CONFIG --variable=completionsdir
> bash-completion)"
> + AC_MSG_RESULT([$BASH_COMPLETIONS_DIR])
> + with_bash_completions_dir=$BASH_COMPLETIONS_DIR
> +
> + dnl Replace bash completions's exec_prefix with our own.
> + dnl Note that ${exec_prefix} is kept verbatim at this point in
> time,
> + dnl and will only be expanded later, when make is called: this
> makes
> + dnl it possible to override such prefix at compilation or
> installation
> + dnl time
> + bash_completions_prefix="$($PKG_CONFIG --variable=prefix bash-
> completion)"
> + if test "x$bash_completions_prefix" = "x" ; then
> + bash_completions_prefix="/usr"
> + fi
> +
> + BASH_COMPLETIONS_DIR='${exec_prefix}'"${BASH_COMPLETIONS_DIR#$
> bash_completions_prefix}"
> + elif test "x$with_bash_completions_dir" = "xno" || test
> "x$with_bash_completions_dir" = "xyes"; then
> + AC_MSG_ERROR([bash-completions-dir must be used only with
> valid path])
> + else
> + BASH_COMPLETIONS_DIR=$with_bash_completions_dir
> + fi
> + AC_SUBST([BASH_COMPLETIONS_DIR])
> + fi
> +
> + AM_CONDITIONAL([WITH_BASH_COMPLETION], [test
> "x$enable_bash_completion" = "xyes"])
> +])
> +
> +
> +AC_DEFUN([VIRT_VIEWER_RESULT_BASH_COMPLETION],[
> + if test "x$enable_bash_completion" = "xyes" ; then
> + AC_MSG_NOTICE([bash completion: $enable_bash_completion DIR:
> [$with_bash_completions_dir]])
> + else
> + AC_MSG_NOTICE([bash completion: $enable_bash_completion])
> + fi
> + AC_MSG_NOTICE([])
> +])
> diff --git a/virt-viewer.spec.in b/virt-viewer.spec.in
> index eea5a74..56a3a8a 100644
> --- a/virt-viewer.spec.in
> +++ b/virt-viewer.spec.in
> @@ -11,8 +11,10 @@
> %endif
>
> %define with_govirt 0
> +%define with_bash_completion 0
> %if 0%{?fedora} > 19 || 0%{?rhel} >= 7
> %define with_govirt 1
> +%define with_bash_completion 1
> %endif
>
> Name: @PACKAGE@
> @@ -28,6 +30,12 @@ Requires(postun): %{_sbindir}/update-alternatives
> Requires(post): desktop-file-utils
> Requires(postun): desktop-file-utils
>
> +%if %{with_bash_completion}
> +# Our bash completion script uses virsh to list domains
> +Requires: libvirt-client
> +%endif
> +
> +
> %if 0%{?enable_autotools}
> BuildRequires: autoconf
> BuildRequires: automake
> @@ -51,6 +59,9 @@ BuildRequires: gettext
> %if %{with_govirt}
> BuildRequires: pkgconfig(govirt-1.0) >= @GOVIRT_REQUIRED@
> %endif
> +%if %{with_bash_completion}
> +BuildRequires: pkgconfig(bash-completion) >=
> @BASH_COMPLETION_REQUIRED@
> +%endif
>
> %if 0%{?fedora} >= 20
> Obsoletes: spice-client < 0.12.3-2
> @@ -102,5 +113,8 @@ rm -rf $RPM_BUILD_ROOT
> %{_datadir}/mime/packages/virt-viewer-mime.xml
> %{_mandir}/man1/virt-viewer.1*
> %{_mandir}/man1/remote-viewer.1*
> +%if %{with_bash_completion}
> +%{_datadir}/bash-completion/completions/virt-viewer
> +%endif
>
> %changelog
More information about the virt-tools-list
mailing list