can't install Debian Testing as a VM

tmcconnell168 at gmail.com tmcconnell168 at gmail.com
Tue Jun 21 19:11:34 UTC 2022


Hi List, 
I'm using the Debian Version of virt-manager to try to install Debian
Bookworm (net install ISO). I get the ISO to launch and where it tries
to create the network config it fails with the error : "Network Auto
configuration failed Your network is probably not using DHCP.
Alternately, the DHCP server may be slow or some network hardware may
not be working properly." 
If I run IP ADDR and get the IP address from virbr0 and manually add it
it I can get past that screen and then finish until it's time to get
the packages from the repositories and then it tells me the repo is
unavailable. I'm assuming this means the network isn't talking. So how
do I fix it? 
The output from IP ADDR: 
ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
state UP group default qlen 1000
    link/ether 30:9c:23:47:64:c5 brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.91/24 brd 192.168.0.255 scope global dynamic
noprefixroute enp1s0
       valid_lft 2931sec preferred_lft 2931sec
    inet6 fe80::329c:23ff:fe47:64c5/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
3: wlp2s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
    link/ether e6:06:c5:d3:90:00 brd ff:ff:ff:ff:ff:ff permaddr
e0:d4:64:e0:c2:89
4: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP group default qlen 1000
    link/ether 52:54:00:f4:b8:83 brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
5: tun0: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state
UNKNOWN group default qlen 1000
    link/none 
    inet 10.162.132.125/10 scope global tun0
       valid_lft forever preferred_lft forever
    inet6 fd7d:76ee:e68f:a993:6c33:1401:f02c:98a8/48 scope global 
       valid_lft forever preferred_lft forever
18: vnet12: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
master virbr0 state UNKNOWN group default qlen 1000
    link/ether fe:54:00:a3:ff:7f brd ff:ff:ff:ff:ff:ff
    inet6 fe80::fc54:ff:fea3:ff7f/64 scope link 
       valid_lft forever preferred_lft forever

and from NFT LIST TABLES
table inet filter
table ip sshguard
table ip6 sshguard
table ip filter
table ip nat
table ip mangle
table ip6 filter
table ip6 nat
table ip6 mangle
table ip6 wg-quick-tun0
table ip wg-quick-tun0
(I'm guessing ip &ip6 filter,mangle and NAT were created by virt-
manager, I didn't create them) 
 Help would be appreciated, I don't know if other distros work on this
since I haven't tried yet. 
Thanks! 

-- 
 <tmcconnell168 at gmail.com>



More information about the virt-tools-list mailing list