[Virtio-fs] [PATCH v2 47/51] migration: Remove res_compatible parameter

Juan Quintela quintela at redhat.com
Mon Dec 5 09:52:24 UTC 2022


It was only used for RAM, and in that case, it means that this amount
of data was sent for memory.  Just delete the field in all callers.

Signed-off-by: Juan Quintela <quintela at redhat.com>
---
 include/migration/register.h   | 20 ++++++++++----------
 migration/savevm.h             |  4 +---
 hw/s390x/s390-stattrib.c       |  6 ++----
 hw/vfio/migration.c            | 10 ++++------
 migration/block-dirty-bitmap.c |  7 +++----
 migration/block.c              |  7 +++----
 migration/migration.c          |  9 ++++-----
 migration/ram.c                |  8 +++-----
 migration/savevm.c             | 14 +++++---------
 hw/vfio/trace-events           |  2 +-
 migration/trace-events         |  2 +-
 11 files changed, 37 insertions(+), 52 deletions(-)

diff --git a/include/migration/register.h b/include/migration/register.h
index c1dcff0f90..1950fee6a8 100644
--- a/include/migration/register.h
+++ b/include/migration/register.h
@@ -48,18 +48,18 @@ typedef struct SaveVMHandlers {
     int (*save_setup)(QEMUFile *f, void *opaque);
     void (*save_live_pending)(QEMUFile *f, void *opaque,
                               uint64_t threshold_size,
-                              uint64_t *res_precopy_only,
-                              uint64_t *res_compatible,
-                              uint64_t *res_postcopy_only);
+                              uint64_t *rest_precopy,
+                              uint64_t *rest_postcopy);
     /* Note for save_live_pending:
-     * - res_precopy_only is for data which must be migrated in precopy phase
-     *     or in stopped state, in other words - before target vm start
-     * - res_compatible is for data which may be migrated in any phase
-     * - res_postcopy_only is for data which must be migrated in postcopy phase
-     *     or in stopped state, in other words - after source vm stop
+     * - res_precopy is for data which must be migrated in precopy
+     *     phase or in stopped state, in other words - before target
+     *     vm start
+     * - res_postcopy is for data which must be migrated in postcopy
+     *     phase or in stopped state, in other words - after source vm
+     *     stop
      *
-     * Sum of res_postcopy_only, res_compatible and res_postcopy_only is the
-     * whole amount of pending data.
+     * Sum of res_precopy and res_postcopy is the whole amount of
+     * pending data.
      */
 
 
diff --git a/migration/savevm.h b/migration/savevm.h
index 6461342cb4..9bd55c336c 100644
--- a/migration/savevm.h
+++ b/migration/savevm.h
@@ -41,9 +41,7 @@ void qemu_savevm_state_complete_postcopy(QEMUFile *f);
 int qemu_savevm_state_complete_precopy(QEMUFile *f, bool iterable_only,
                                        bool inactivate_disks);
 void qemu_savevm_state_pending(QEMUFile *f, uint64_t max_size,
-                               uint64_t *res_precopy_only,
-                               uint64_t *res_compatible,
-                               uint64_t *res_postcopy_only);
+                               uint64_t *res_precopy, uint64_t *res_postcopy);
 void qemu_savevm_send_ping(QEMUFile *f, uint32_t value);
 void qemu_savevm_send_open_return_path(QEMUFile *f);
 int qemu_savevm_send_packaged(QEMUFile *f, const uint8_t *buf, size_t len);
diff --git a/hw/s390x/s390-stattrib.c b/hw/s390x/s390-stattrib.c
index 9eda1c3b2a..ee60b53da4 100644
--- a/hw/s390x/s390-stattrib.c
+++ b/hw/s390x/s390-stattrib.c
@@ -183,16 +183,14 @@ static int cmma_save_setup(QEMUFile *f, void *opaque)
 }
 
 static void cmma_save_pending(QEMUFile *f, void *opaque, uint64_t max_size,
-                              uint64_t *res_precopy_only,
-                              uint64_t *res_compatible,
-                              uint64_t *res_postcopy_only)
+                              uint64_t *res_precopy, uint64_t *res_postcopy)
 {
     S390StAttribState *sas = S390_STATTRIB(opaque);
     S390StAttribClass *sac = S390_STATTRIB_GET_CLASS(sas);
     long long res = sac->get_dirtycount(sas);
 
     if (res >= 0) {
-        *res_precopy_only += res;
+        *res_precopy += res;
     }
 }
 
diff --git a/hw/vfio/migration.c b/hw/vfio/migration.c
index c74453e0b5..d03681678d 100644
--- a/hw/vfio/migration.c
+++ b/hw/vfio/migration.c
@@ -458,9 +458,8 @@ static void vfio_save_cleanup(void *opaque)
 
 static void vfio_save_pending(QEMUFile *f, void *opaque,
                               uint64_t threshold_size,
-                              uint64_t *res_precopy_only,
-                              uint64_t *res_compatible,
-                              uint64_t *res_postcopy_only)
+                              uint64_t *res_precopy,
+                              uint64_t *res_postcopy)
 {
     VFIODevice *vbasedev = opaque;
     VFIOMigration *migration = vbasedev->migration;
@@ -471,10 +470,9 @@ static void vfio_save_pending(QEMUFile *f, void *opaque,
         return;
     }
 
-    *res_precopy_only += migration->pending_bytes;
+    *res_precopy += migration->pending_bytes;
 
-    trace_vfio_save_pending(vbasedev->name, *res_precopy_only,
-                            *res_postcopy_only, *res_compatible);
+    trace_vfio_save_pending(vbasedev->name, *res_precopy, *res_postcopy);
 }
 
 static int vfio_save_iterate(QEMUFile *f, void *opaque)
diff --git a/migration/block-dirty-bitmap.c b/migration/block-dirty-bitmap.c
index 9aba7d9c22..dfea546330 100644
--- a/migration/block-dirty-bitmap.c
+++ b/migration/block-dirty-bitmap.c
@@ -763,9 +763,8 @@ static int dirty_bitmap_save_complete(QEMUFile *f, void *opaque)
 
 static void dirty_bitmap_save_pending(QEMUFile *f, void *opaque,
                                       uint64_t max_size,
-                                      uint64_t *res_precopy_only,
-                                      uint64_t *res_compatible,
-                                      uint64_t *res_postcopy_only)
+                                      uint64_t *res_precopy,
+                                      uint64_t *res_postcopy)
 {
     DBMSaveState *s = &((DBMState *)opaque)->save;
     SaveBitmapState *dbms;
@@ -785,7 +784,7 @@ static void dirty_bitmap_save_pending(QEMUFile *f, void *opaque,
 
     trace_dirty_bitmap_save_pending(pending, max_size);
 
-    *res_postcopy_only += pending;
+    *res_postcopy += pending;
 }
 
 /* First occurrence of this bitmap. It should be created if doesn't exist */
diff --git a/migration/block.c b/migration/block.c
index 4347da1526..593754c38c 100644
--- a/migration/block.c
+++ b/migration/block.c
@@ -863,9 +863,8 @@ static int block_save_complete(QEMUFile *f, void *opaque)
 }
 
 static void block_save_pending(QEMUFile *f, void *opaque, uint64_t max_size,
-                               uint64_t *res_precopy_only,
-                               uint64_t *res_compatible,
-                               uint64_t *res_postcopy_only)
+                               uint64_t *res_precopy,
+                               uint64_t *res_postcopy)
 {
     /* Estimate pending number of bytes to send */
     uint64_t pending;
@@ -886,7 +885,7 @@ static void block_save_pending(QEMUFile *f, void *opaque, uint64_t max_size,
 
     trace_migration_block_save_pending(pending);
     /* We don't do postcopy */
-    *res_precopy_only += pending;
+    *res_precopy += pending;
 }
 
 static int block_load(QEMUFile *f, void *opaque, int version_id)
diff --git a/migration/migration.c b/migration/migration.c
index c3490c495d..6b8a6dd74e 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -3756,15 +3756,14 @@ typedef enum {
  */
 static MigIterateState migration_iteration_run(MigrationState *s)
 {
-    uint64_t pending_size, pend_pre, pend_compat, pend_post;
+    uint64_t pending_size, pend_pre, pend_post;
     bool in_postcopy = s->state == MIGRATION_STATUS_POSTCOPY_ACTIVE;
 
     qemu_savevm_state_pending(s->to_dst_file, s->threshold_size, &pend_pre,
-                              &pend_compat, &pend_post);
-    pending_size = pend_pre + pend_compat + pend_post;
+                              &pend_post);
+    pending_size = pend_pre + pend_post;
 
-    trace_migrate_pending(pending_size, s->threshold_size,
-                          pend_pre, pend_compat, pend_post);
+    trace_migrate_pending(pending_size, s->threshold_size, pend_pre, pend_post);
 
     if (pending_size && pending_size >= s->threshold_size) {
         /* Still a significant amount to transfer */
diff --git a/migration/ram.c b/migration/ram.c
index 334309f1c6..640839dcee 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -3393,9 +3393,7 @@ static int ram_save_complete(QEMUFile *f, void *opaque)
 }
 
 static void ram_save_pending(QEMUFile *f, void *opaque, uint64_t max_size,
-                             uint64_t *res_precopy_only,
-                             uint64_t *res_compatible,
-                             uint64_t *res_postcopy_only)
+                             uint64_t *res_precopy, uint64_t *res_postcopy)
 {
     RAMState **temp = opaque;
     RAMState *rs = *temp;
@@ -3415,9 +3413,9 @@ static void ram_save_pending(QEMUFile *f, void *opaque, uint64_t max_size,
 
     if (migrate_postcopy_ram()) {
         /* We can do postcopy, and all the data is postcopiable */
-        *res_compatible += remaining_size;
+        *res_postcopy += remaining_size;
     } else {
-        *res_precopy_only += remaining_size;
+        *res_precopy += remaining_size;
     }
 }
 
diff --git a/migration/savevm.c b/migration/savevm.c
index a0cdb714f7..4d02887f25 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1472,16 +1472,13 @@ flush:
  * for units that can't do postcopy.
  */
 void qemu_savevm_state_pending(QEMUFile *f, uint64_t threshold_size,
-                               uint64_t *res_precopy_only,
-                               uint64_t *res_compatible,
-                               uint64_t *res_postcopy_only)
+                               uint64_t *res_precopy,
+                               uint64_t *res_postcopy)
 {
     SaveStateEntry *se;
 
-    *res_precopy_only = 0;
-    *res_compatible = 0;
-    *res_postcopy_only = 0;
-
+    *res_precopy = 0;
+    *res_postcopy = 0;
 
     QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
         if (!se->ops || !se->ops->save_live_pending) {
@@ -1493,8 +1490,7 @@ void qemu_savevm_state_pending(QEMUFile *f, uint64_t threshold_size,
             }
         }
         se->ops->save_live_pending(f, se->opaque, threshold_size,
-                                   res_precopy_only, res_compatible,
-                                   res_postcopy_only);
+                                   res_precopy, res_postcopy);
     }
 }
 
diff --git a/hw/vfio/trace-events b/hw/vfio/trace-events
index 73dffe9e00..a21cbd2a56 100644
--- a/hw/vfio/trace-events
+++ b/hw/vfio/trace-events
@@ -157,7 +157,7 @@ vfio_save_cleanup(const char *name) " (%s)"
 vfio_save_buffer(const char *name, uint64_t data_offset, uint64_t data_size, uint64_t pending) " (%s) Offset 0x%"PRIx64" size 0x%"PRIx64" pending 0x%"PRIx64
 vfio_update_pending(const char *name, uint64_t pending) " (%s) pending 0x%"PRIx64
 vfio_save_device_config_state(const char *name) " (%s)"
-vfio_save_pending(const char *name, uint64_t precopy, uint64_t postcopy, uint64_t compatible) " (%s) precopy 0x%"PRIx64" postcopy 0x%"PRIx64" compatible 0x%"PRIx64
+vfio_save_pending(const char *name, uint64_t precopy, uint64_t postcopy) " (%s) precopy 0x%"PRIx64" postcopy 0x%"PRIx64
 vfio_save_iterate(const char *name, int data_size) " (%s) data_size %d"
 vfio_save_complete_precopy(const char *name) " (%s)"
 vfio_load_device_config_state(const char *name) " (%s)"
diff --git a/migration/trace-events b/migration/trace-events
index 57003edcbd..f2a873fd6c 100644
--- a/migration/trace-events
+++ b/migration/trace-events
@@ -150,7 +150,7 @@ migrate_fd_cleanup(void) ""
 migrate_fd_error(const char *error_desc) "error=%s"
 migrate_fd_cancel(void) ""
 migrate_handle_rp_req_pages(const char *rbname, size_t start, size_t len) "in %s at 0x%zx len 0x%zx"
-migrate_pending(uint64_t size, uint64_t max, uint64_t pre, uint64_t compat, uint64_t post) "pending size %" PRIu64 " max %" PRIu64 " (pre = %" PRIu64 " compat=%" PRIu64 " post=%" PRIu64 ")"
+migrate_pending(uint64_t size, uint64_t max, uint64_t pre, uint64_t post) "pending size %" PRIu64 " max %" PRIu64 " (pre = %" PRIu64 " post=%" PRIu64 ")"
 migrate_send_rp_message(int msg_type, uint16_t len) "%d: len %d"
 migrate_send_rp_recv_bitmap(char *name, int64_t size) "block '%s' size 0x%"PRIi64
 migration_completion_file_err(void) ""
-- 
2.38.1



More information about the Virtio-fs mailing list