[edk2-devel] [PATCH v2 6/7] EmbeddedPkg: Fix DwEmmc SendCommand polling
Loh, Tien Hock
tien.hock.loh at intel.com
Tue Jun 11 09:12:17 UTC 2019
> -----Original Message-----
> From: Leif Lindholm <leif.lindholm at linaro.org>
> Sent: Tuesday, June 11, 2019 5:09 PM
> To: Loh, Tien Hock <tien.hock.loh at intel.com>
> Cc: 'Haojian Zhuang' <haojian.zhuang at linaro.org>; 'devel at edk2.groups.io'
> <devel at edk2.groups.io>; 'thloh85 at gmail.com' <thloh85 at gmail.com>; 'Ard
> Biesheuvel' <ard.biesheuvel at linaro.org>
> Subject: Re: [PATCH v2 6/7] EmbeddedPkg: Fix DwEmmc SendCommand
> polling
>
> On Tue, Jun 11, 2019 at 02:40:51AM +0000, Loh, Tien Hock wrote:
> > Leif,
> >
> > Since Haojian have a newer driver model that uses the
> > NonDiscoverableDeviceDxe, I believe we should be moving to use the new
> > driver.
> >
> > I'll try to test out the patches submitted by Haojian in the mean time.
> > Can you help review the patch? Thanks!
>
> I can have another look at the patch, but I would really appreciate if you
> could also review it please?
>
> My problem is that I really don't have much understanding of SD/MMC
> protocols.
Sure. I'll test it out on the SoCFPGA platform first. It is quite a long patch, so I might take a bit of time to review.
Thanks Leif!
>
> /
> Leif
>
> > > -----Original Message-----
> > > From: Loh, Tien Hock
> > > Sent: Thursday, May 30, 2019 3:56 PM
> > > To: Haojian Zhuang <haojian.zhuang at linaro.org>; Leif Lindholm
> > > <leif.lindholm at linaro.org>
> > > Cc: devel at edk2.groups.io; thloh85 at gmail.com; Ard Biesheuvel
> > > <ard.biesheuvel at linaro.org>
> > > Subject: RE: [PATCH v2 6/7] EmbeddedPkg: Fix DwEmmc SendCommand
> > > polling
> > >
> > > > -----Original Message-----
> > > > From: Haojian Zhuang <haojian.zhuang at linaro.org>
> > > > Sent: Thursday, May 30, 2019 3:06 PM
> > > > To: Leif Lindholm <leif.lindholm at linaro.org>
> > > > Cc: Loh, Tien Hock <tien.hock.loh at intel.com>;
> > > > devel at edk2.groups.io; thloh85 at gmail.com; Ard Biesheuvel
> > > > <ard.biesheuvel at linaro.org>
> > > > Subject: Re: [PATCH v2 6/7] EmbeddedPkg: Fix DwEmmc SendCommand
> > > > polling
> > > >
> > > > On Tue, May 28, 2019 at 07:04:09PM +0100, Leif Lindholm wrote:
> > > > > +Haojian,
> > > > >
> > > > > Haojian - since you are the original author, can you comment on
> > > > > the delays? Are these silicon bug workarounds (so we need to add
> > > > > a Pcd), or does these changes work on your platforms too?
> > > >
> > > > I'm not in the loop, so I missed the patch series.
> > > >
> > > > The patch series can't work on my platform for the eMMC. Although
> > > > a variable is created to identify whether it's a SD or eMMC
> > > > device, it doesn't identify the eMMC device by the right way. So
> > > > the eMMC device isn't initialized successfully on my platform.
> > > >
> > > > 1. Since MMC framework could identify whether it's eMMC device or
> > > > SD device, we need to make device driver gets this kind of
> > > > information from the MMC framework. And we need to support
> > > > multiple eMMC/SD instances in MMC framework.
> > >
> > > Yeah my bad I didn't read through the SD/MMC specs on that. Now I
> > > check the specs and you're right, the information should be read
> > > from MMC framework.
> > >
> > > >
> > > > 2. I sent a patch series to support both eMMC device and SD device
> before.
> > > > https://edk2.groups.io/g/devel/message/28572
> > > > &&
> > > > https://edk2.groups.io/g/devel/message/28615
> > > > Maybe it's missed. Could you help to review that patch series?
> >
> > Leif, can you help review the patch series? Since Haojian have moved the
> driver to NonDiscoverableDeviceDxe, I think that would be a more
> appropriate driver to be used going forward. Thanks!
> >
> > >
> > > >
> > > > Best Regards
> > > > Haojian
> > > >
> > > > >
> > > > > Regards,
> > > > >
> > > > > Leif
> > > > >
> > > > > On Mon, May 27, 2019 at 05:30:27PM +0800,
> > > > > tien.hock.loh at intel.com
> > > > wrote:
> > > > > > From: "Tien Hock, Loh" <tien.hock.loh at intel.com>
> > > > > >
> > > > > > Change SendCommand polling mode to remove unnecessary delay,
> > > > > > and check for transfer done only when block data is to be
> read/write.
> > > > > > This would also increase performance slightly.
> > > > > >
> > > > > > Signed-off-by: "Tien Hock, Loh" <tien.hock.loh at intel.com>
> > > > > > Cc: Leif Lindholm <leif.lindholm at linaro.org>
> > > > > > Cc: Ard Biesheuvel <ard.biesheuvel at linaro.org>
> > > > > > ---
> > > > > > EmbeddedPkg/Drivers/DwEmmcDxe/DwEmmcDxe.c | 43
> > > > +++++++++++++++-----
> > > > > > 1 file changed, 33 insertions(+), 10 deletions(-)
> > > > > >
> > > > > > diff --git a/EmbeddedPkg/Drivers/DwEmmcDxe/DwEmmcDxe.c
> > > > > > b/EmbeddedPkg/Drivers/DwEmmcDxe/DwEmmcDxe.c
> > > > > > index c6c8e04917..b57833458f 100644
> > > > > > --- a/EmbeddedPkg/Drivers/DwEmmcDxe/DwEmmcDxe.c
> > > > > > +++ b/EmbeddedPkg/Drivers/DwEmmcDxe/DwEmmcDxe.c
> > > > > > @@ -286,16 +286,13 @@ SendCommand (
> > > > > > DWEMMC_INT_RCRC | DWEMMC_INT_RE;
> > > > > > ErrMask |= DWEMMC_INT_DCRC | DWEMMC_INT_DRT |
> > > > DWEMMC_INT_SBE;
> > > > > > do {
> > > > > > - MicroSecondDelay(500);
> > > > > > Data = MmioRead32 (DWEMMC_RINTSTS);
> > > > > > -
> > > > > > - if (Data & ErrMask) {
> > > > > > - return EFI_DEVICE_ERROR;
> > > > > > - }
> > > > > > - if (Data & DWEMMC_INT_DTO) { // Transfer Done
> > > > > > - break;
> > > > > > - }
> > > > > > } while (!(Data & DWEMMC_INT_CMD_DONE));
> > > > > > +
> > > > > > + if (Data & ErrMask) {
> > > > > > + return EFI_DEVICE_ERROR;
> > > > > > + }
> > > > > > +
> > > > > > return EFI_SUCCESS;
> > > > > > }
> > > > > >
> > > > > > @@ -550,8 +547,9 @@ DwEmmcReadBlockData (
> > > > > > )
> > > > > > {
> > > > > > EFI_STATUS Status;
> > > > > > - UINT32 DescPages, CountPerPage, Count;
> > > > > > + UINT32 DescPages, CountPerPage, Count, ErrMask;
> > > > > > EFI_TPL Tpl;
> > > > > > + UINTN Rintsts = 0;
> > > > > >
> > > > > > Tpl = gBS->RaiseTPL (TPL_NOTIFY);
> > > > > >
> > > > > > @@ -574,6 +572,18 @@ DwEmmcReadBlockData (
> > > > > > DEBUG ((DEBUG_ERROR, "Failed to read data,
> > > > mDwEmmcCommand:%x, mDwEmmcArgument:%x, Status:%r\n",
> > > mDwEmmcCommand,
> > > > mDwEmmcArgument, Status));
> > > > > > goto out;
> > > > > > }
> > > > > > +
> > > > > > + while(!((MmioRead32(DWEMMC_RINTSTS) &
> > > (DWEMMC_INT_DTO))))
> > > > {
> > > > > > + Rintsts = MmioRead32 (DWEMMC_RINTSTS); } ErrMask =
> > > > > > + DWEMMC_INT_EBE | DWEMMC_INT_HLE | DWEMMC_INT_RTO |
> > > > > > + DWEMMC_INT_RCRC | DWEMMC_INT_RE |
> > > > DWEMMC_INT_DCRC |
> > > > > > + DWEMMC_INT_DRT | DWEMMC_INT_SBE;
> > > > > > +
> > > > > > + if (Rintsts & ErrMask) {
> > > > > > + Status = EFI_DEVICE_ERROR;
> > > > > > + goto out;
> > > > > > + }
> > > > > > out:
> > > > > > // Restore Tpl
> > > > > > gBS->RestoreTPL (Tpl);
> > > > > > @@ -589,8 +599,9 @@ DwEmmcWriteBlockData (
> > > > > > )
> > > > > > {
> > > > > > EFI_STATUS Status;
> > > > > > - UINT32 DescPages, CountPerPage, Count;
> > > > > > + UINT32 DescPages, CountPerPage, Count, ErrMask;
> > > > > > EFI_TPL Tpl;
> > > > > > + UINTN Rintsts = 0;
> > > > > >
> > > > > > Tpl = gBS->RaiseTPL (TPL_NOTIFY);
> > > > > >
> > > > > > @@ -613,6 +624,18 @@ DwEmmcWriteBlockData (
> > > > > > DEBUG ((DEBUG_ERROR, "Failed to write data,
> > > > mDwEmmcCommand:%x, mDwEmmcArgument:%x, Status:%r\n",
> > > mDwEmmcCommand,
> > > > mDwEmmcArgument, Status));
> > > > > > goto out;
> > > > > > }
> > > > > > +
> > > > > > + while(!((MmioRead32(DWEMMC_RINTSTS) &
> > > (DWEMMC_INT_DTO))))
> > > > {
> > > > > > + Rintsts = MmioRead32 (DWEMMC_RINTSTS); } ErrMask =
> > > > > > + DWEMMC_INT_EBE | DWEMMC_INT_HLE | DWEMMC_INT_RTO |
> > > > > > + DWEMMC_INT_RCRC | DWEMMC_INT_RE |
> > > > DWEMMC_INT_DCRC |
> > > > > > + DWEMMC_INT_DRT | DWEMMC_INT_SBE;
> > > > > > +
> > > > > > + if (Rintsts & ErrMask) {
> > > > > > + Status = EFI_DEVICE_ERROR;
> > > > > > + goto out;
> > > > > > + }
> > > > > > out:
> > > > > > // Restore Tpl
> > > > > > gBS->RestoreTPL (Tpl);
> > > > > > --
> > > > > > 2.19.0
> > > > > >
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#42195): https://edk2.groups.io/g/devel/message/42195
Mute This Topic: https://groups.io/mt/31807965/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list