[edk2-devel] [PATCH V7 1/1] OvmfPkg: Enable TDX in ResetVector

[Brijesh Singh via groups.io]

Like Gerd I would prefer to have one metadata table in the reset GUID.
The metadata table will contain multiple entries; lot of entries are
common between SNP and TDX. Some entries will have specific meaning for
the platform. Those special entries should be marked using the
OVMF_SECTION_TYPE_{TDX,SNP}_XXXX. It is perfectly fine to have a more
than one entry for the same region with different type, e.g

GhcbBookkeepingSnp:

  GHCB_BOOKKEPING_BASE_ADDRESS

  GHCB_BOOKKEEPING_SIZE

  OVMF_SECTION_TYPE_SNP_MEM

TdxMailBoxExt:

  GHCB_BOOKKEPING_BASE_ADDRESS

  GHCB_BOOKKEEPING_SIZE

  OVMF_SECTION_TYPE_TDX_MAILBOX

If we want all the OVMF_SECTION_TYPE_SNP_xxx should be defined in a
separate file then that is also doable. I put everything in one place
because I was trying to keep entry order similar to what is present in
MEMFD.

thanks

On 9/23/21 6:39 AM, Yao, Jiewen wrote:
> I strongly recommend to separate SEV and TDX in all context, if it is something SEV or TDX specific.
> Then each file has clear ownership.
> If it is something generic for both SEV and TDX, it can in one file. 
>
> For example, SecPeiTempRam/SecPageTable can be in common file.
> But SevSnpSecrets/GhcbBookkeeping should be in SEV file.
>
> Thank you
> Yao Jiewen
>
>> -----Original Message-----
>> From: Gerd Hoffmann <kraxel at redhat.com>
>> Sent: Thursday, September 23, 2021 4:48 PM
>> To: Xu, Min M <min.m.xu at intel.com>
>> Cc: devel at edk2.groups.io; Ard Biesheuvel <ardb+tianocore at kernel.org>; Justen,
>> Jordan L <jordan.l.justen at intel.com>; Brijesh Singh <brijesh.singh at amd.com>;
>> Erdem Aktas <erdemaktas at google.com>; James Bottomley
>> <jejb at linux.ibm.com>; Yao, Jiewen <jiewen.yao at intel.com>; Tom Lendacky
>> <thomas.lendacky at amd.com>
>> Subject: Re: [PATCH V7 1/1] OvmfPkg: Enable TDX in ResetVector
>>
>> On Thu, Sep 23, 2021 at 12:38:24AM +0000, Xu, Min M wrote:
>>> On September 22, 2021 3:49 PM, Gerd Hoffmann wrote:
>>>>   Hi,
>>>>
>>>>> +%ifdef ARCH_X64
>>>>> +;
>>>>> +; TDX Metadata offset block
>>>>> +;
>>>>> +; TdxMetadata.asm is included in ARCH_X64 because Inte TDX is only ;
>>>>> +available in ARCH_X64. Below block describes the offset of ;
>>>>> +TdxMetadata block in Ovmf image ; ; GUID :
>>>>> +e47a6535-984a-4798-865e-4685a7bf8ec2
>>>>> +;
>>>>> +tdxMetadataOffsetStart:
>>>>> +    DD      tdxMetadataOffsetStart - TdxMetadataGuid - 16
>>>>> +    DW      tdxMetadataOffsetEnd - tdxMetadataOffsetStart
>>>>> +    DB      0x35, 0x65, 0x7a, 0xe4, 0x4a, 0x98, 0x98, 0x47
>>>>> +    DB      0x86, 0x5e, 0x46, 0x85, 0xa7, 0xbf, 0x8e, 0xc2
>>>>> +tdxMetadataOffsetEnd:
>>>>> +
>>>>> +%endif
>>>> This should be switched to common ovmf metadata (see patches 4-7 of the
>>>> SEV-SNP series).
>>>>
>>>> Min: please have a look at these patches.
>>>>
>>> Hi, Gerd
>>> I checked the patches 4-7 of the SEV-SNP series. The common
>>> OvmfMetadata is designed for both SEV and TDX, right?
>> That is the idea, yes.
>>
>>> If so, then it means the SEV and TDX metadata will be mixed in this
>>> OvmfMetadata.
>> Yes.
>>
>>> I am thinking there will always be different fields for
>>> SEV and TDX. For example, SEV has PcdOvmfSecGhcbPageTable but TDX
>>> doesn't need that page. If the common OvmfMetadata is consumed by
>>> TDX-QEMU, then PcdOvmfSecGhcbPageTableBase will be initialized too.
>>> That doesn't make sense.
>> We have different range types.  OVMF_* are the common areas.  SEV_* will
>> be used by sev only, TDX_* will be used by tdx only.  TDX and SEV
>> entries are allowed to overlap, i.e. PcdOvmfSecGhcbPageTableBase should
>> have some SEV_* type for sev (I think this needs fixing in the series),
>> and tdx can use the page for something else by adding an TDX_* entry for
>> the same range.
>>
>>> I am thinking that SEV and TDX can keep their own Metadata (in
>>> separate files, SevMetadata.asm and TdxMetadata.asm) which are pointed
>>> by the SEV or TDX offsets in the GUID-ed chain in ResetVector.
>> I'd very much prefer to have a single table to avoid duplication for the
>> common memory areas and keep the reset vector small.
>>
>> Having separate SevMetadata.asm + TdxMetadata.asm files (then have
>> OvmfMetadata.asm include these two) is an option.  I think this isn't
>> needed, we can also just group the entries in OvmfMetadata.asm.
>>
>>> In this case, SEV and TDX can design their own metadata flexibly, for
>>> example, the attribute, the item structure, add/remove/update the
>>> items, etc.
>> Why have two ways to do the same thing?
>>
>> take care,
>>   Gerd


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#81032): https://edk2.groups.io/g/devel/message/81032
Mute This Topic: https://groups.io/mt/85761661/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-