dl585 questions

[Bryan J. Smith]

Does the BIOS' settings for USB have support for legacy keyboard emulation (whatever the BIOS calls it - Phoenix ServerBIOS I assume?)?
I've seen that cause some Red Hat 2.6 kernels to hang at udev load/probe.


-- 
Bryan J. Smith (currently mobile)
b.j.smith at ieee.org

-----Original Message-----
From:  Charles Weber 
Date:  05-1-20 7:09
To:  amd64-list at redhat.com
Subj:  dl585 questions

I am running Fedora Core 2 X86_64 on several DL345 and DL585 Proliants.
The 345s seem fine in all respects for basically a cheap box. The 585s I
have are configured with 1 5i raid (builtin) and 3 6400 dual channel PCI
Raid with lots of disks, 2 processors and 8GB ram.
I have not yet gotten the 585s to boot with any updated kernels after
2.6.8-1.521smp. It always hangs on audit in either of the 2.6.9 updated
FC2 kernels. Once it hangs I have to boot twice for the 2.6.8 kernel to
start as well. I could swear I saw mail list kernel boot parameter
somewhere, but could not find it.

Just for more work, last night I tried 2.6.10,10-ac10 and 11-rc1 with
auditing not compiled in. If AT Keyboard was compiled in and not a
module it would hang on the keyboard init while booting. If it was
compiled as a module, it would boot fine but the CCISS driver (compiled
in) would not see my 6400 raid controllers. 
The 3 dual channel 6400 raid controllers appear as 6 devices,
i.e. /dev/cciss/c0dx, c1dx,d2dx and so on.

I should say that except for this the 585s are very nice servers.
Comments or suggestions please.
-- 
Charles Weber <weberc at comcast.net>

-- 
amd64-list mailing list
amd64-list at redhat.com
https://www.redhat.com/mailman/listinfo/amd64-list