[edk2-devel] [PATCH v2 1/5] OvmfPkg/OvmfXen: set PcdAcpiS3Enable at initialization
Lin, Gary (HPS OE-Linux)
gary.lin at hpe.com
Fri Aug 13 06:13:01 UTC 2021
There are several functions in OvmfPkg/Library using
QemuFwCfgS3Enabled() to detect the S3 support status. However, in
MdeModulePkg, PcdAcpiS3Enable is used to check S3 support. Since
InitializeXenPlatform() didn't set PcdAcpiS3Enable as
InitializePlatform() did, this made the inconsistency between
drivers/functions.
For example, S3SaveStateDxe checked PcdAcpiS3Enable and skipped
S3BootScript because the default value is FALSE. On the other hand,
PlatformBootManagerBeforeConsole() from OvmfPkg/Library called
QemuFwCfgS3Enabled() and found it returned TRUE, so it invoked
SaveS3BootScript(). However, S3SaveStateDxe skipped S3BootScript, so
SaveS3BootScript() asserted due to EFI_NOT_FOUND.
This issue mainly affects "HVM Direct Kernel Boot". If "acpi_s3" is
set as "True" in xl.cfg, then the S3 Support bit is set and passed
with fw_cfg.
v2:
- Amend the description and address "HVM Direct Kernel Boot"
- Add the comment for the conditional test of QemuFwCfgS3Enabled()
- Remove unused QemuFwCfgLib
Cc: Ard Biesheuvel <ardb+tianocore at kernel.org>
Cc: Jiewen Yao <jiewen.yao at intel.com>
Cc: Jordan Justen <jordan.l.justen at intel.com>
Cc: Anthony Perard <anthony.perard at citrix.com>
Cc: Julien Grall <julien at xen.org>
Cc: Jim Fehlig <jfehlig at suse.com>
Cc: Joey Li <jlee at suse.com>
Signed-off-by: Gary Lin <gary.lin at hpe.com>
---
OvmfPkg/XenPlatformPei/XenPlatformPei.inf | 2 ++
OvmfPkg/XenPlatformPei/Platform.c | 13 +++++++++++++
2 files changed, 15 insertions(+)
diff --git a/OvmfPkg/XenPlatformPei/XenPlatformPei.inf b/OvmfPkg/XenPlatformPei/XenPlatformPei.inf
index 597cb6fcd7ff..20c27ff34b6c 100644
--- a/OvmfPkg/XenPlatformPei/XenPlatformPei.inf
+++ b/OvmfPkg/XenPlatformPei/XenPlatformPei.inf
@@ -57,6 +57,7 @@ [LibraryClasses]
ResourcePublicationLib
PeiServicesLib
PeimEntryPoint
+ QemuFwCfgS3Lib
MtrrLib
MemEncryptSevLib
PcdLib
@@ -79,6 +80,7 @@ [Pcd]
gUefiOvmfPkgTokenSpaceGuid.PcdPciMmio64Base
gUefiOvmfPkgTokenSpaceGuid.PcdPciMmio64Size
gUefiOvmfPkgTokenSpaceGuid.PcdQ35TsegMbytes
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode
diff --git a/OvmfPkg/XenPlatformPei/Platform.c b/OvmfPkg/XenPlatformPei/Platform.c
index a811e72ee301..e60478fdb493 100644
--- a/OvmfPkg/XenPlatformPei/Platform.c
+++ b/OvmfPkg/XenPlatformPei/Platform.c
@@ -26,6 +26,7 @@
#include <Library/PciLib.h>
#include <Library/PeimEntryPoint.h>
#include <Library/PeiServicesLib.h>
+#include <Library/QemuFwCfgS3Lib.h>
#include <Library/ResourcePublicationLib.h>
#include <Guid/MemoryTypeInformation.h>
#include <Ppi/MasterBootMode.h>
@@ -423,6 +424,8 @@ InitializeXenPlatform (
IN CONST EFI_PEI_SERVICES **PeiServices
)
{
+ EFI_STATUS Status;
+
DEBUG ((DEBUG_INFO, "Platform PEIM Loaded\n"));
DebugDumpCmos ();
@@ -433,6 +436,16 @@ InitializeXenPlatform (
CpuDeadLoop ();
}
+ //
+ // This S3 conditional test is mainly for HVM Direct Kernel Boot since
+ // QEMU fwcfg isn't really supported other than that.
+ //
+ if (QemuFwCfgS3Enabled ()) {
+ DEBUG ((DEBUG_INFO, "S3 support was detected on QEMU\n"));
+ Status = PcdSetBoolS (PcdAcpiS3Enable, TRUE);
+ ASSERT_EFI_ERROR (Status);
+ }
+
XenConnect ();
BootModeInitialization ();
--
2.31.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#79247): https://edk2.groups.io/g/devel/message/79247
Mute This Topic: https://groups.io/mt/84857773/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list