[edk2-devel] [PATCH v2 1/5] OvmfPkg/OvmfXen: set PcdAcpiS3Enable at initialization
Ard Biesheuvel
ardb at kernel.org
Mon Aug 16 07:07:01 UTC 2021
Does this series have a cover letter?
On Fri, 13 Aug 2021 at 08:13, Lin, Gary (HPS OE-Linux) <gary.lin at hpe.com> wrote:
>
> There are several functions in OvmfPkg/Library using
> QemuFwCfgS3Enabled() to detect the S3 support status. However, in
> MdeModulePkg, PcdAcpiS3Enable is used to check S3 support. Since
> InitializeXenPlatform() didn't set PcdAcpiS3Enable as
> InitializePlatform() did, this made the inconsistency between
> drivers/functions.
>
> For example, S3SaveStateDxe checked PcdAcpiS3Enable and skipped
> S3BootScript because the default value is FALSE. On the other hand,
> PlatformBootManagerBeforeConsole() from OvmfPkg/Library called
> QemuFwCfgS3Enabled() and found it returned TRUE, so it invoked
> SaveS3BootScript(). However, S3SaveStateDxe skipped S3BootScript, so
> SaveS3BootScript() asserted due to EFI_NOT_FOUND.
>
> This issue mainly affects "HVM Direct Kernel Boot". If "acpi_s3" is
> set as "True" in xl.cfg, then the S3 Support bit is set and passed
> with fw_cfg.
>
> v2:
> - Amend the description and address "HVM Direct Kernel Boot"
> - Add the comment for the conditional test of QemuFwCfgS3Enabled()
> - Remove unused QemuFwCfgLib
>
> Cc: Ard Biesheuvel <ardb+tianocore at kernel.org>
> Cc: Jiewen Yao <jiewen.yao at intel.com>
> Cc: Jordan Justen <jordan.l.justen at intel.com>
> Cc: Anthony Perard <anthony.perard at citrix.com>
> Cc: Julien Grall <julien at xen.org>
> Cc: Jim Fehlig <jfehlig at suse.com>
> Cc: Joey Li <jlee at suse.com>
> Signed-off-by: Gary Lin <gary.lin at hpe.com>
> ---
> OvmfPkg/XenPlatformPei/XenPlatformPei.inf | 2 ++
> OvmfPkg/XenPlatformPei/Platform.c | 13 +++++++++++++
> 2 files changed, 15 insertions(+)
>
> diff --git a/OvmfPkg/XenPlatformPei/XenPlatformPei.inf b/OvmfPkg/XenPlatformPei/XenPlatformPei.inf
> index 597cb6fcd7ff..20c27ff34b6c 100644
> --- a/OvmfPkg/XenPlatformPei/XenPlatformPei.inf
> +++ b/OvmfPkg/XenPlatformPei/XenPlatformPei.inf
> @@ -57,6 +57,7 @@ [LibraryClasses]
> ResourcePublicationLib
>
> PeiServicesLib
>
> PeimEntryPoint
>
> + QemuFwCfgS3Lib
>
> MtrrLib
>
> MemEncryptSevLib
>
> PcdLib
>
> @@ -79,6 +80,7 @@ [Pcd]
> gUefiOvmfPkgTokenSpaceGuid.PcdPciMmio64Base
>
> gUefiOvmfPkgTokenSpaceGuid.PcdPciMmio64Size
>
> gUefiOvmfPkgTokenSpaceGuid.PcdQ35TsegMbytes
>
> + gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable
>
> gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
>
> gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved
>
> gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode
>
> diff --git a/OvmfPkg/XenPlatformPei/Platform.c b/OvmfPkg/XenPlatformPei/Platform.c
> index a811e72ee301..e60478fdb493 100644
> --- a/OvmfPkg/XenPlatformPei/Platform.c
> +++ b/OvmfPkg/XenPlatformPei/Platform.c
> @@ -26,6 +26,7 @@
> #include <Library/PciLib.h>
>
> #include <Library/PeimEntryPoint.h>
>
> #include <Library/PeiServicesLib.h>
>
> +#include <Library/QemuFwCfgS3Lib.h>
>
> #include <Library/ResourcePublicationLib.h>
>
> #include <Guid/MemoryTypeInformation.h>
>
> #include <Ppi/MasterBootMode.h>
>
> @@ -423,6 +424,8 @@ InitializeXenPlatform (
> IN CONST EFI_PEI_SERVICES **PeiServices
>
> )
>
> {
>
> + EFI_STATUS Status;
>
> +
>
> DEBUG ((DEBUG_INFO, "Platform PEIM Loaded\n"));
>
>
>
> DebugDumpCmos ();
>
> @@ -433,6 +436,16 @@ InitializeXenPlatform (
> CpuDeadLoop ();
>
> }
>
>
>
> + //
>
> + // This S3 conditional test is mainly for HVM Direct Kernel Boot since
>
> + // QEMU fwcfg isn't really supported other than that.
>
> + //
>
> + if (QemuFwCfgS3Enabled ()) {
>
> + DEBUG ((DEBUG_INFO, "S3 support was detected on QEMU\n"));
>
> + Status = PcdSetBoolS (PcdAcpiS3Enable, TRUE);
>
> + ASSERT_EFI_ERROR (Status);
>
> + }
>
> +
>
> XenConnect ();
>
>
>
> BootModeInitialization ();
>
> --
> 2.31.1
>
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#79337): https://edk2.groups.io/g/devel/message/79337
Mute This Topic: https://groups.io/mt/84857773/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list