[edk2-devel] [edk2-platforms] [PATCH V1] KabylakeSiliconPkg: Default for PeciC10Reset should be 1

[Benjamin Doron]

The MCH BAR field is the 38:15 bit range. Are the higher bits guaranteed to
be clear, so that a 32 bit read is sufficient?

Best regards,
Benjamin


On Mon, Aug 16, 2021 at 11:53 AM Michael Kubacki <
mikuback at linux.microsoft.com> wrote:

> Reviewed-by: Michael Kubacki <michael.kubacki at microsoft.com>
>
> On 8/16/2021 12:02 AM, Nate DeSimone wrote:
> > The default value for CpuConfigLibPreMemConfig->PeciC10Reset
> > should be 1 so that Peci Reset on C10 exit is disabled.
> >
> > Other bug fixes in
> > KabylakeSiliconPkg\Cpu\Library\PeiCpuPolicyLibPreMem\PeiCpuPolicyLib.c
> >
> >   1. PCI configuration space can only be read 32-bits at a time.
> >      Converted MmioRead64 to MmioRead32.
> >   2. Added a RShiftU64() call to prevent compiler instrinsics from
> >      being inserted. Since this is a 64-bit integer shift done in
> >      IA-32 mode it is possible for intrinsic calls to be added.
> >
> > Cc: Chasel Chiu <chasel.chiu at intel.com>
> > Cc: Sai Chaganty <rangasai.v.chaganty at intel.com>
> > Cc: Benjamin Doron <benjamin.doron00 at gmail.com>
> > Cc: Michael Kubacki <michael.kubacki at microsoft.com>
> > Signed-off-by: Nate DeSimone <nathaniel.l.desimone at intel.com>
> > ---
> >   .../Cpu/Library/PeiCpuPolicyLibPreMem/PeiCpuPolicyLib.c  | 9 ++++++---
> >   1 file changed, 6 insertions(+), 3 deletions(-)
> >
> > diff --git
> a/Silicon/Intel/KabylakeSiliconPkg/Cpu/Library/PeiCpuPolicyLibPreMem/PeiCpuPolicyLib.c
> b/Silicon/Intel/KabylakeSiliconPkg/Cpu/Library/PeiCpuPolicyLibPreMem/PeiCpuPolicyLib.c
> > index 35041322a7..85baa46208 100644
> > ---
> a/Silicon/Intel/KabylakeSiliconPkg/Cpu/Library/PeiCpuPolicyLibPreMem/PeiCpuPolicyLib.c
> > +++
> b/Silicon/Intel/KabylakeSiliconPkg/Cpu/Library/PeiCpuPolicyLibPreMem/PeiCpuPolicyLib.c
> > @@ -1,7 +1,7 @@
> >   /** @file
> >     This file is PeiCpuPolicy library.
> >
> > -Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
> > +Copyright (c) 2017 - 2021, Intel Corporation. All rights reserved.<BR>
> >   SPDX-License-Identifier: BSD-2-Clause-Patent
> >
> >   **/
> > @@ -45,13 +45,14 @@ LoadCpuConfigLibPreMemConfigDefault (
> >     CpuConfigLibPreMemConfig->BootFrequency           = 1;    // Maximum
> non-turbo Performance
> >     CpuConfigLibPreMemConfig->ActiveCoreCount         = 0;    // All
> cores active
> >     CpuConfigLibPreMemConfig->VmxEnable               =
> CPU_FEATURE_ENABLE;
> > -  CpuConfigLibPreMemConfig->CpuRatio = ((AsmReadMsr64
> (MSR_PLATFORM_INFO) >> N_PLATFORM_INFO_MAX_RATIO) &
> B_PLATFORM_INFO_RATIO_MASK);
> > +  CpuConfigLibPreMemConfig->CpuRatio = RShiftU64 (AsmReadMsr64
> (MSR_PLATFORM_INFO), N_PLATFORM_INFO_MAX_RATIO) &
> B_PLATFORM_INFO_RATIO_MASK;
> > +
> >     ///
> >     /// FCLK Frequency
> >     ///
> >     CpuFamily  = GetCpuFamily();
> >     CpuSku     = GetCpuSku();
> > -  MchBar = MmioRead64 (MmPciBase (SA_MC_BUS, SA_MC_DEV, SA_MC_FUN) +
> R_SA_MCHBAR) &~BIT0;
> > +  MchBar = MmioRead32 (MmPciBase (SA_MC_BUS, SA_MC_DEV, SA_MC_FUN) +
> R_SA_MCHBAR) &~BIT0;
> >     if (IsPchLinkDmi (CpuFamily) && (MmioRead16 (MmPciBase
> (SA_PEG_BUS_NUM, SA_PEG_DEV_NUM, SA_PEG10_FUN_NUM) + PCI_VENDOR_ID_OFFSET)
> != 0xFFFF)) {
> >       PegDisabled = MmioRead32 ((UINTN) MchBar +
> R_SA_MCHBAR_BIOS_RESET_CPL_OFFSET) & BIT3;
> >     } else {
> > @@ -67,6 +68,8 @@ LoadCpuConfigLibPreMemConfigDefault (
> >     } else {
> >       CpuConfigLibPreMemConfig->FClkFrequency = 0;  // 800MHz
> >     }
> > +
> > +  CpuConfigLibPreMemConfig->PeciC10Reset = 1;  // Disables Peci Reset
> on C10 exit
> >   }
> >
> >   /**
>
>


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#79374): https://edk2.groups.io/g/devel/message/79374
Mute This Topic: https://groups.io/mt/84916474/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/edk2-devel-archive/attachments/20210816/689f53e0/attachment.htm>