[edk2-devel] [PATCH v3 5/7] Silicon/Broadcom/Bcm27xx: Move linkup check into the cfg accessor

[Andrei Warkentin]

Reviewed-by: Andrei Warkentin <awarkentin at vmware.com>
________________________________
From: Jeremy Linton <jeremy.linton at arm.com>
Sent: Thursday, August 19, 2021 11:16 PM
To: devel at edk2.groups.io <devel at edk2.groups.io>
Cc: pete at akeo.ie <pete at akeo.ie>; ardb+tianocore at kernel.org <ardb+tianocore at kernel.org>; Andrei Warkentin <awarkentin at vmware.com>; Sunny.Wang at arm.com <Sunny.Wang at arm.com>; samer.el-haj-mahmoud at arm.com <samer.el-haj-mahmoud at arm.com>; Jeremy Linton <jeremy.linton at arm.com>
Subject: [PATCH v3 5/7] Silicon/Broadcom/Bcm27xx: Move linkup check into the cfg accessor

The existing code fails to create/finish configuring the
pcie subsystem if it fails to get a linkup. This is reasonable
on the RPi4 because it generally won't happen, and the OS
could not see the root port. Now that the OS can see the
root port, its a bit odd if it only shows up when
something is plugged into the first slot. Lets move the
link up check into the config accessor where it will be used
to restrict sending CFG TLP's out the port when nothing is
plugged in. Thus avoiding a SERROR during probe.

Signed-off-by: Jeremy Linton <jeremy.linton at arm.com>
---
 .../Bcm2711PciHostBridgeLib/Bcm2711PciHostBridgeLibConstructor.c   | 5 -----
 .../Broadcom/Bcm27xx/Library/Bcm2711PciSegmentLib/PciSegmentLib.c  | 7 +++++++
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/Silicon/Broadcom/Bcm27xx/Library/Bcm2711PciHostBridgeLib/Bcm2711PciHostBridgeLibConstructor.c b/Silicon/Broadcom/Bcm27xx/Library/Bcm2711PciHostBridgeLib/Bcm2711PciHostBridgeLibConstructor.c
index 8587d2d36d..4d4c584726 100644
--- a/Silicon/Broadcom/Bcm27xx/Library/Bcm2711PciHostBridgeLib/Bcm2711PciHostBridgeLibConstructor.c
+++ b/Silicon/Broadcom/Bcm27xx/Library/Bcm2711PciHostBridgeLib/Bcm2711PciHostBridgeLibConstructor.c
@@ -204,11 +204,6 @@ Bcm2711PciHostBridgeLibConstructor (
   } while (((Data & 0x30) != 0x030) && (Timeout));
   DEBUG ((DEBUG_VERBOSE, "PCIe link ready (status=%x) Timeout=%d\n", Data, Timeout));

-  if ((Data & 0x30) != 0x30) {
-    DEBUG ((DEBUG_ERROR, "PCIe link not ready (status=%x)\n", Data));
-    return EFI_DEVICE_ERROR;
-  }
-
   if ((Data & 0x80) != 0x80) {
     DEBUG ((DEBUG_ERROR, "PCIe link not in RC mode (status=%x)\n", Data));
     return EFI_UNSUPPORTED;
diff --git a/Silicon/Broadcom/Bcm27xx/Library/Bcm2711PciSegmentLib/PciSegmentLib.c b/Silicon/Broadcom/Bcm27xx/Library/Bcm2711PciSegmentLib/PciSegmentLib.c
index 6d15e82fa2..b627e5730b 100644
--- a/Silicon/Broadcom/Bcm27xx/Library/Bcm2711PciSegmentLib/PciSegmentLib.c
+++ b/Silicon/Broadcom/Bcm27xx/Library/Bcm2711PciSegmentLib/PciSegmentLib.c
@@ -105,6 +105,13 @@ PciSegmentLibGetConfigBase (
           return 0xFFFFFFFF;
       }

+      /* Don't probe slots if the link is down */
+      Data = MmioRead32 (PCIE_REG_BASE + PCIE_MISC_PCIE_STATUS);
+      if ((Data & 0x30) != 0x30) {
+          DEBUG ((DEBUG_ERROR, "PCIe link not ready (status=%x)\n", Data));
+          return 0xFFFFFFFF;
+      }
+
       MmioWrite32 (PCIE_REG_BASE + PCIE_EXT_CFG_INDEX, Address);
       mPciSegmentLastAccess = Address;
     }
--
2.13.7



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#79651): https://edk2.groups.io/g/devel/message/79651
Mute This Topic: https://groups.io/mt/85014310/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/edk2-devel-archive/attachments/20210820/6392b047/attachment.htm>