[edk2-devel] [PATCH v3 0/7] RPi4: Enable ACPI PCIe conduit

[Ard Biesheuvel]

On Sat, 21 Aug 2021 at 20:59, Jared McNeill <jmcneill at invisible.ca> wrote:
>
> Works as expected on NetBSD 10 + Raspberry Pi 4 B (4GB).
>
> Tested-by: Jared McNeill <jmcneill at invisible.ca>
>

Pushed as 0efab5febe78..46026ad759b7

thanks all,

>
> On Fri, 20 Aug 2021, Samer El-Haj-Mahmoud wrote:
>
> > +Jared to review/test the series with NetBSD 10, which supports the DEN0115 interface (https://www.netbsd.org/changes/changes-10.0.html#port-evbarm)
> >
> >
> >
> >> -----Original Message-----
> >> From: Jeremy Linton <jeremy.linton at arm.com>
> >> Sent: Friday, August 20, 2021 12:16 AM
> >> To: devel at edk2.groups.io
> >> Cc: pete at akeo.ie; ardb+tianocore at kernel.org; Andrei Warkentin
> >> (awarkentin at vmware.com) <awarkentin at vmware.com>; Sunny Wang
> >> <Sunny.Wang at arm.com>; Samer El-Haj-Mahmoud <Samer.El-Haj-
> >> Mahmoud at arm.com>; Jeremy Linton <Jeremy.Linton at arm.com>
> >> Subject: [PATCH v3 0/7] RPi4: Enable ACPI PCIe conduit
> >>
> >> A new Arm standard DEN0115A specifies how platforms that don't have
> >> standard ECAM can use the firmware to handle config read/write
> >> operations. This is mostly implemented in TFA but UEFI needs to assure
> >> that there is a description of the root complex in the ACPI namespace.
> >>
> >> This set adds that description based on a new menu item which toggles
> >> between XHCI platform description and PCIe via a BDS menu selection on
> >> the RPi4. The CM4 is really the platform that needs this as it has a
> >> PCIe slot. On that platform PCIe is enabled by default.
> >>
> >> v2->v3:
> >>     Remove ACPI0004 container around PCI root bridge along with some
> >>         whitespace/tweaks to the Pci.asl file.
> >>     Add Linux quirk _DSD patch at the end.
> >>
> >> v1->v2:
> >>     Use global shared interrupts in PCI PRT which is a pretty
> >>         significant simplification.
> >>     Modify bus max to use the secondary side of the root port for
> >>         enforcing device limits
> >>     Various other AML cleanups per Ard (drop redundant _DMA, bump UID
> >>         to make it unique, etc)
> >>     Break link status move into its own patch
> >>     MADT->MCFG typos in various comments
> >>     Commit message tweaking
> >>
> >> Jeremy Linton (7):
> >>   Platform/RaspberryPi: Add XHCI/PCI selection menu
> >>   Platform/RaspberryPi: Break XHCI into its own SSDT
> >>   Platform/RaspberryPi: Add PCIe SSDT
> >>   Silicon/Broadcom/Bcm27xx: Relax PCIe device restriction
> >>   Silicon/Broadcom/Bcm27xx: Move linkup check into the cfg accessor
> >>   Platform/RaspberryPi: Enable NVMe boot on CM4
> >>   Platform/RaspberryPi: Add Linux quirk support
> >>
> >>  Platform/RaspberryPi/AcpiTables/AcpiTables.inf     |   4 +
> >>  Platform/RaspberryPi/AcpiTables/Dsdt.asl           |   3 -
> >>  Platform/RaspberryPi/AcpiTables/Pci.asl            | 168
> >> +++++++++++++++++++++
> >>  Platform/RaspberryPi/AcpiTables/Xhci.asl           |  35 +++--
> >>  Platform/RaspberryPi/Drivers/ConfigDxe/ConfigDxe.c |  56 +++++++
> >>  .../RaspberryPi/Drivers/ConfigDxe/ConfigDxe.inf    |   1 +
> >>  .../RaspberryPi/Drivers/ConfigDxe/ConfigDxeHii.uni |   5 +
> >>  .../RaspberryPi/Drivers/ConfigDxe/ConfigDxeHii.vfr |  17 +++
> >>  Platform/RaspberryPi/Include/ConfigVars.h          |   4 +
> >>  Platform/RaspberryPi/RPi3/RPi3.dsc                 |   6 +
> >>  Platform/RaspberryPi/RPi4/RPi4.dsc                 |  13 ++
> >>  Platform/RaspberryPi/RPi4/RPi4.fdf                 |   5 +
> >>  Platform/RaspberryPi/RaspberryPi.dec               |   1 +
> >>  .../Bcm2711PciHostBridgeLibConstructor.c           |   5 -
> >>  .../Library/Bcm2711PciSegmentLib/PciSegmentLib.c   |  28 +++-
> >>  15 files changed, 323 insertions(+), 28 deletions(-)
> >>  create mode 100644 Platform/RaspberryPi/AcpiTables/Pci.asl
> >>
> >> --
> >> 2.13.7
> >
> > IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
> >


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#79685): https://edk2.groups.io/g/devel/message/79685
Mute This Topic: https://groups.io/mt/85014312/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-