AW: [et-mgmt-tools] koan-installation hangs
Tim.Einmahl at kba.de
Tim.Einmahl at kba.de
Tue Apr 29 05:53:03 UTC 2008
Hi,
the problem was a firewall rule.Silly me :)
But thanks for mentioning the --autonet feature, it is very useful !
I was able to install RHEL4-xen with koan successfully.
But at the moment I have a problem installing RHEL3 with koan.
The CPU supports hardware virtualization, so shouldn' t I use
koan -T xenfv ??
If I run this, then I get
libvir: Xen Daemon error : POST operation failed: (xend.err "Error creating domain: (2, 'Invalid kernel', 'xc_dom_find_loader: no loader found\\n')")
virDomainCreateLinux() failed POST operation failed: (xend.err "Error creating domain: (2, 'Invalid kernel', 'xc_dom_find_loader: no loader found\\n')")
Kind Regards
Tim
-----Ursprüngliche Nachricht-----
Von: et-mgmt-tools-bounces at redhat.com [mailto:et-mgmt-tools-bounces at redhat.com] Im Auftrag von Pablo Iranzo Gómez
Gesendet: Montag, 21. April 2008 10:12
An: Fedora/Linux Management Tools
Betreff: Re: [et-mgmt-tools] koan-installation hangs
Hi
Try to start an VNC installation and check VT3 and 4 for information,
also try to use the full network parameters on command line and not
specify any "dhcp" option on kickstart.
Not tested, but have a look at --autonet parameter for Koan.
Regards
Pablo
El lun, 21-04-2008 a las 10:06 +0200, Tim.Einmahl at kba.de escribió:
> Hi,
>
> I successfully installed cobbler and I can use it to install Redhat
> Enterprise Linux
> over PXE over a dedicated interface on the cobblerserver.
>
> But I would like to also install virtual machines with koan over the
> public interface of the cobblerserver, where I am stuck at the moment.
>
> I can start the installation with koan, but the problem is, that the
> domU that is being created is not able
> to get an IP-Adress for the installation process over DHCP, because not
> in every subnet there is a DHCP-Server.So the domU should have a static
> ip-address for the installation process to be able to download the
> kickstart-file.
>
> I tried to configure /var/lib/cobbler/settings with:
>
> kernel_options:
> ksdevice: link
> lang: ' '
> text: ~
> ip: 192.168.0.1
> netmask: 255.255.255.0
> network: static
> device: eth0
>
> The problem is, when the install-kernel boots, it hangs at
> XENBUS: Device with no driver: device/vbd/51712
> XENBUS: Device with no driver: device/vif/0
> Freeing unused kernel memory: 168k freed
> Write protecting the kernel read-only data: 360k
>
> Then nothing more happens and virt-manager only shows a blue screen.
>
> Do you have any idea what's going wrong ?
>
> Thanks in advance
> Kind Regards
>
> Tim
>
>
>
> _______________________________________________
> et-mgmt-tools mailing list
> et-mgmt-tools at redhat.com
> https://www.redhat.com/mailman/listinfo/et-mgmt-tools
--
Pablo Iranzo Gómez (Pablo.Iranzo at redhat.com)
RHCE/Global Profesional Services Consultant Spain
Phone: +34 645 01 01 49 (CET/CEST)
GnuPG KeyID: 0xFAD3CF0D
---
Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain
Dirección Registrada: Red Hat S.L., C/ Velazquez 63, Madrid 28001, Spain
Inscrita en el Reg. Mercantil de Madrid - C.I.F. B82657941
***********************************************************************************
Hinweis: Diese E-Mail und evtl. Anhaenge wurden automatisch
auf Viren geprueft und gelten als virenfrei. Ihr IT-Referat.
***********************************************************************************
More information about the et-mgmt-tools
mailing list